Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Tsinghua University(Science and Technology)》 2007-S2
Add to Favorite Get Latest Update

Continuous curvature adaptive planning of the measuring path for CMM

HE Xueming1,2,LI Chenggang1,HU Yujin1,QU Ping2,LI Wenjun2(1.School of Mechanical Science and Engineering,Huazhong University of Science and Technology,Wuhan 430074,China;2.School of Mechanical Engineering,Southern Yangtze University,Wuxi 214122,China)  
The coordinate measuring machine working principle widely used in reverse engineering with several methods used for planning and route optimization when measuring surfaces.The circle interpolation method and the polynomial method are widely used because they are simple and easily controlled.During adaptive measurements of a sculptured surface,the circle interpolation method and the polynomial method need more data points with the precision rapidly deteriorating as the surface complicity is increases.The present adaptive continuous curvature method assumes that the sculptured surface has n-order geometric continuity to measure object with sculptured surfaces.The system improves the precision and efficiency of the planned trajectory,and the reliability of the results.
【Fund】: 国家自然科学基金资助项目(50575082)
【CateGory Index】: TP274
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 5 Hits
1 LAI Xin min 1, HUANG Tian 2, CHEN Guan long 1, LIN Zhong qin 1, ZENG Zi ping 2 1. School of Mechanical Eng., Shanghai Jiaotong Univ., Shanghai 200030, China; 2. School of Mechanical Eng., Tianjin Univ., Tianjin 300072, China;Adaptive Sampling of Digitizing for the Free Form Surface[J];JOURNAL OF SHANGHAI JIAOTONG UNIVERSITY;1999-07
2 WANG Ping,XIE Chie,LIAO Shi-peng (College of Manufacturing Science and Engineering,Sichuan University,Chengdu 610065,China);Measure routes' optimization analysis based on the CMM[J];China Measurement Technology;2005-02
3 LI Hai,XU Hai-wei (National Institute of Measurement and Testing Technology, Chengdu 610021,China);Inspecting surfaces by CMM based on 3D CAD model[J];China Measurement Technology;2005-04
4 YANG Ren-ping1, ZHANG Guo-xiong2, LIU Shu-gui2, QIU Zu-rong2, SHI Qing-wei2, LI Jing-jie2 (1.Institute of Chemical Materials, China Academy of Engineering Physics, Mianyang 621900, China; 2.State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin 300072, China);Sculptured Surface of Rotation Measuring Techniques[J];Journal of Tianjin University;2005-05
5 WU Yongqing(Tianjin University,Tianjin,China)LIU ShuguiZHANG Guoxiong;A Survey of Inspection Planning Problem of Intelligent CMMs[J];China Mechanical Engineering;2001-07
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIU Ning,ZHOU Shu(National Institute of Measurement and Testing Technology,Chengdu 610021,China);Technical research of 3D coordinate measuring machines using photogrammetry[J];China Measurement Technology;2005-06
2 JIANG Zhou,WANG Wei,QIN Xin,LI Yang(National Institute of Measurement and Testing Technology,Chengdu 610021,China);CMM control model based-on networked control[J];China Measurement Technology;2005-06
3 XU Xin, LIU Shu gui (State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin 300072, China);Development of IGES Post Processor in Integrated CMM/CAD System[J];Journal of Tianjin University;2003-01
4 (Dept. of Electronic Information Engineering, Yangtze Normal University,Chongqing,408000,China) HE Guo-quan (State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University; Tianjin 300072; China) LIU Shu-gui;Design of Offset Auto-Adjustment Device For Contour Measuring System With Rotory Table[J];Microcomputer Information;2008-25
5 JI Xiao-gang(School of Mechanical Engineering,Jiangnan University,Wuxi 214122,Jiangsu,CHN);Realization of digitization method for supercharger impeller[J];Modern Manufacturing Engineering;2009-03
6 Wu Shixiong Wang Wen Chen Zichen Department of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China;ADAPTIVE MEASUREMENT METHOD BASED ON CHANGING-CURVATURE FOR UNKNOWN FREE-FORM SURFACE[J];中国机械工程学报(英文版);2004-03
7 Zhang Lixin1,2,Huang Yumei1,Yang Xingang1,Tang Youqiao1,Jiang Guoyan1(1 School of Mechanical and Precision Instrumental Engineering,Xi′an University of Technology,Xi′an 710048,China;2 School of Machinery and Electricity Engineering,Shihezi University,Shihezi 832003,China);Research and realization of rotational axis positioning precision measurement system based on direct driven motor[J];Chinese Journal of Scientific Instrument;2008-01
8 Li Cunhua~1 Yang Qicheng~2 Qi Yuedong~2(1 Hongta Tobacco(Group)Co.,Ltd,Yuxi 653100,China;2 Yuxi Cigarette Factory,Yuxi 653100,China);Research on precision 3D surface measurement based on tip compensation technology and reverse engineering[J];Chinese Journal of Scientific Instrument;2008-11
9 Gong Ai-hong Zhou Xue-liang (Dept. of Mechanical Engineering,Hubei Automotive Industries Institute,Shiyan,Hubei 442002,China );3D Measuring Based on CAD Model of Engine Crankshaft Forging[J];Technology of Equipment Maintenance;2007-03
10 Wu Siyuan Zhou Xiaojun Li Ling Li Xiongbing Zhejiang University,Hangzhou,310027;A Study on Free Form Surface Digitization Based on Ultrasonic Distance Measurement[J];China Mechanical Engineering;2006-22
China Proceedings of conference Full-text Database 1 Hits
1 ;Research on the Precision Measurement of 3D Surface Based on the Technology of Tip Compensation and Reversing Engineering[A];[C];2009
【Secondary Citations】
Chinese Journal Full-text Database 3 Hits
1 Bai Zuolin;Zhao Rujia;Zhang Dinghong;Zhang Jiehong(Schcol of Mechanical Engineering);AUTO-INSPECTIONANDPROCESSSYSTEMOFEREE CURVES AND SCULPTURED SURFACES FOR CNC COORDINATE MEASURING MACHINES[J];JOURNAL OF XI'AN JIAOTONG UNIVERSITY;1995-10
2 SHAN Dongri(Zhejiang University, Hangzhou,China) KE Yinglin LIU Yunfeng;Study on Measurement Planning of Complex Surface in Reverse Engineering[J];China Mechanical Engineering;2003-01
3 ;Measuring Trace Planning on Gauging Space Freedom Surface[J];MODULAR MACHINE TOOL & AUTOMATIC MANUFACTURING TECHNIQUE;1994-10
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved