Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Shandong Metallurgy》 2011-02
Add to Favorite Get Latest Update

Reason Analysis of Tensile Fracture Demixing of Thick Gauge Ship Plate

LU Zhong-liang,WANG Jing,ZHANG Ting,LIU Pin,JIANG Hong-liang(The Quality Department of Laiwu Iron and Steel Group Corporation,Laiwu 271104,China)  
Because pockmarks and cracks appeared in the tensile simple of thick gauge ship plate DH36 produced by Laiwu Steel,demixing phenomena appeared in the fracture and the percentage elongation after fracture was low,the microscopic structure and the fractography were analyzed by means of macro check,metallographic and SEM.The results showed that it is main reasons of the fracture demixing that banded structure,Widmanstatten structure and fine cracks resulted in the segregation of carbon and alloy elements and the grain boundary precipitation of inclusion.Reducing composition segregation and restraining Widmanstatten structure in the center by appropriate heat temperature can cut levels of this demixing.
【CateGory Index】: TG115
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 2 Hits
1 ZHU Fu-xian, LIU Yan-chun, LI Yan-mei, WANG Guo-dong(The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China. );Effect of Austenite Recrystallization on Microstructure and Properties of Q345 Plate Steel[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2005-06
2 NIU Lin-xia(The Technology Center of WISCO,Wuhan 430081,China);Analysis on demand of steels for shipbuilding purpose in China[J];Wuhan Iron and Steel Corporation Technology;2006-05
Chinese Journal Full-text Database 10 Hits
1 Huang Song Ma Yupu Cong Jingong Han Peng(Angang New Steel Co.,Ltd.);Study on Ship Steel Plate with High Strength of 40kg Level Produced by TMCP Technology[J];Angang Technology;2005-06
2 Yan Ling,Liu Rendong,Yan Pingyuan,Zhou Jing(Technology Center of Angang Steel Co.,Ltd.,Anshan 114009,Liaoning,China);Study on Regularity of Microstructures Evolution of Lightweight TWIP Steels Applied in Automobile[J];Angang Technology;2010-01
3 Ding Yanyong1,3,Zhao Lin2,3,Zhou Cheng3,Zhang Weiyan1(1. Cold Rolled Plant of Angang Steel Co.,Ltd.,Anshan 114021,Liaoning,China; 2. Investment Planning Department of Angang Steel Co.,Ltd.,Anshan 114021,Liaoning,China;3. University of Science and Technology Beijing,Beijing 100083,China);Effect of Continuous Annealing Technology on Yield Strength of Low Carbon Steel[J];Angang Technology;2010-03
4 LIU Jian - tao, CHEN Huan - ming, HU Ben-fu, LIU Guo - quan, ZHANG Yi - wen (1. School of Material Science and Engineering, University of science&Technology Beijing, Beijing 100083, China; 2. High Temperature Material Institute, Central Iron Steel Research Institute, Beijing 100081, China);High temperature deformation and dynamic recrystallization of a new type of P/M superalloy[J];Ordnance Material Science and Engineering;2004-04
5 YAO Shu-ping,LI Ying-ying,DONG Xia,DU Yue-he (1.The Central Laboratory of Inner Mongolia North Heavy Industries Group Co. Ltd. Baotou 014033,China;2.Harbin University of Technology,Weihai 264209, China;3.Military Representative Office in the 447 Factory, Baotou 014033,China);Failure analysis of the piston rod[J];Ordnance Material Science and Engineering;2008-06
6 DONG Ying1,XIN Shijin1,ZHUANG Yuwen2,DONG Lisong1,ZHOU Xishun1,CUI Yanfang1, FAN Ling1,LI Peng1(1.Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China; 2.Qiqihar Peace Machinery Plant in Heilongjiang province,Qiqihar 161000,China);Application study of S390 cable cutter material[J];Ordnance Material Science and Engineering;2012-03
7 ZHANG Zhonghua,YANG Jianqiang,ZHANG Chunxia,SHAO Weidong and OU Xinzhe (Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900,China);Precipitated phase of nickel-based OCTG and its effect on corrosion performance[J];Baosteel Technology;2011-06
8 YU Leiyun1 and LU Jun2 (1.Special Steel Business Unit,Baoshan Iron & Steel Co.,Ltd.,Shanghai 200940,China; 2.Research Institute,Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900,China);Effect of the upsetting process on the as-cast microstructure of φ508mm superalloy GH4169 ingot[J];Baosteel Technology;2012-01
9 CHEN Guoan, YANG Wangyue, GUO Shouzhen, SUN Zuqing Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China The State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China;Carbonitride precipitates during deformation of undercooled austenite in Nb-microalloyed steel[J];Journal of University of Science and Technology Beijing;2005-03
10 GUO Fajun LU Qiaotong LI Lingzhen ZONG Yanbing CANG Daqiang Metallurgical and Ecological Engineering School,University of Science and Technology Beijing,Beijing China,100083;Effect of AC field on directional solidification and interface solute coefficient of distribution[J];Journal of University of Science and Technology Beijing;2006-02
China Proceedings of conference Full-text Database 10 Hits
1 LIU Jian-tao,ZHANG Guo-Xing,ZHANG Yi-wen,TAO Yu,ZHANG Ying,CHI Yue,CHEN Kun(High Temperature Material Research Institute,Central Iron & Steel Research Institute,Beijing 100081,China);Effect of Aging Treatment on Microstructure and Tensile Property of FGH4096 PM Super Alloy[A];[C];2011
2 WU Shang-chao, MA You-hui, QIN Xiu-ying, ZHANG Li-chao (Medium Plate, Handan Iron and Steel Co., Ltd., HBIS, Handan 056015, Hebei, China);Analysis of Unqualified Toughness of Q345E Plate and Countermeasures[A];[C];2011
3 LIU Yang-chun 1 , XU Bin 2 , WU Jun-kuan 2 , LI Fei 1 , JIN Yong-chun 1 , YANG Dai-jun, ZHU Guo-sen 1 (1. Shougang Technology Research Institute, Beijing 100041, China; 2. Shougang Qian’an Iron and Steel Co., Ltd., Qian’an 064404, Hebei, China);Production and Use of Hot Rolled Coil of Shougang Hull Structural Steel[A];[C];2011
4 CHEN Zai-liang L Dong-xian CAO Ming-yu FU Hai-feng (Beijing Research Institute of Mechanical and Electrical Technology,Beijing 100083,China);Study on Residual Stress and Crack Failure in Metal Heat Treatment[A];[C];2007
5 MA Yong-lin FAN Zhen-hai XING Shu-qing JIN Zi-li ZHAO Li-ping LI Zhong-yuan ZHANG Xiao-yan Material and Metallurgy School,UST Inner Mongolia,Baotou 014010 China;The Effects of Magnetic Annealing on Microstructure of Non-oriented Silicon Steel[A];[C];2007
6 ZHAO Yong-tao Dong Jun-hui ZHAO Li-ping Wang Yu-feng Pei Xiao-bing (Material and Metallurgy Engineering School ,UST Inner Mongolia,Baotou 014010;Materials Science and Engineering,Inner Mongolia University of Technology,Huhhot,010051,China);Preparatory thoughts of Metal materials course building[A];[C];2007
7 Ma Qin1,2),Chen Zhilin1),Su Jipeng1),Fu Kaiwu3) 1) State Key Laboratory of Gansu Advanced Non-Ferrous Metal Materials,Lanzhou University of Technology,Lanzhou 730050,China 2) Key Laboratory of Non-Ferrous Metal alloy of Ministry of Education,Lanzhou University of Technology,Lanzhou 730050,China 3) Lanzhou Weite welding material burden Co.Ltd,Lanzhou 730070,China;Influence of Quenching and Tempering Temperature on Microstructure and Mechanical Properties of ER5 Steel[A];[C];2011
8 Yan Ling Mi Zhenli Tang Di Guo Jin Dai Yongjuan (Beijing University of Science and Technology National Engineering Research Center for Advanced Rolling Technology, Beijing 100083);RESEARCH ON DEFORMATION TWINS FORMATION AND ITS MECHANICAL PROPERTIES OF TWIP STEEL[A];[C];2005
9 Guo Jin Tang Di Mi Zhenli Yan Ling Dai Yongjuan (National Engineering Research Center for Advanced Rolling Technology University of Science and Technology Beijing, Beijing 100083);THE INFLUENCE FOR THE STRUCTURES AND PROPERTIES OF THE TWIP STEEL AFFECTED BY THE HEAT TREATMENT PROCESS[A];[C];2005
10 ZHAO Zhong-li HAN Jing-tao LIU Jing LIU Zi-wei (Material Science and Engineering School,University of Science Technology Beijing,Beijing 100083,China);Metallurgical Analysis and Experimental Study on Inner Crack Healing by Intercritical Heat Treatment of Q235 Steel[A];[C];2007
【Secondary Citations】
Chinese Journal Full-text Database 4 Hits
1 DU Lin xiu, DING Hua, LIU Xiang hua, WANG Guo dong (State Key Lab of Rolling Technology & Automation, Northeastern University, Shenyang 110004, China.;Microstructural Evolution of a Low Carbon Mn Steel During Control Rolling at Different Temperatures[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2002-10
2 Xu Hongqing,Lu Jianhua,Cheng Hongxing and Xu Xia (Jinan Iron and Steel Group Corp.);Development of Shipbuilding Industry in Our Country and Analysis of Ship Plate Supply[J];Wide and Heavy Plate;2003-03
3 Shuai Qi(Market department of Jinan Iron and Steel Group Company Jinan 250101);THE PRODUCTION AND MARKETING PRACTICE OF STEEL PLATE USED IN CHINA SHIP BUILDING INDUSTRY[J];Metallurgical Information Review;2005-05
4 FAN Jianwen1,YI Min1,CHEN Mingyue1,ZHU Fuxian2,ZHAO Shengguo3(1Technical Research Institute,Shougang Group Co,Beijing 100041,Chg & Automation of Northeastern University,Shenyang 110004,China;3Plate Mill,Shougang Group Co,Beijing 100041,China);Research of controlled rolling and accelerated cooling process of Q345 plate for grain refinement strengthening[J];Steel Rolling;2003-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved