Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Shanghai Jiaotong University》 2008-05
Add to Favorite Get Latest Update

Synthesis Error Modeling of the Five-Axis Machine Tools Based on Multi-body System Theory

WANG Xiu-shan~(1,2),YANG Jian-guo~1,YAN Jia-yu~1(1.School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai 200240,China;2.Mechanical & Electrical Engineering College,He'nan Agricultural University,Zhengzhou 450002,China)  
Synthesis error modeling of the five-axis numerical control(NC) machine tools is the key technique to kinematics design,precision analysis and error compensation.This article finished the synthesis error modeling of the five-axis machine tools,analyzed the influence on model of error of perpendicularity between the linear axes,and improved the modeling and identification of the thermal error.The modeling method is simple and is not affected by the structure of NC machine tools.The error calculation,error compensation and command correction can be implemented by the geometric errors model.
【Fund】: 高等学校全国优秀博士学位论文作者专项基金资助项目(200131);; 上海市引进技术的吸收与创新年度计划项目(04-62)
【CateGory Index】: TG659
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Guozheng YANG Haihui(Anhui Technical College of Mechanical & Electrical Engineering,Wuhu 241000);Research on Application of NC Machine Tools of Descartes Coordinate System[J];Journal of Chongqing University of Science and Technology(Natural Sciences Edition);2012-01
2 Wang Fuyuan1,2 Xu Jiawen1 Zhao Jianshe1(1College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China)(2College of Mechanical Engineering,Yancheng Institute of Technology,Yancheng 224051,China);Accuracy analysis and error compensation on electrochemical sweep-forming of integral blisk[J];Journal of Southeast University(Natural Science Edition);2010-05
3 HE Jia1,2,TIAN Xue-guang1,2,ZHANG De-long1,TIAN Xing-zhi1(Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China;2.Graduate School of the Chinese Academy of Sciences,Beijing 100039,China);Error analysis and error modeling of manipulator based on Huston method[J];Journal of Engineering Design;2010-06
4 YANG Hai-hui(Mechanical Department,Anhui Technical College of Mechanical & Electrical Engineering,Wuhu 241002,China);Analysis and Modeling of Errors for THG400 Horizontal Machining Center[J];Journal of Anhui Science and Technology University;2013-03
5 YANG Haihui(Mechanical Department,Anhui Technical College of Mechanical & Electrical Engineering,Wuhu Anhui 241002);Analysis and Modeling of Errors for THG400 Horizontal Machining Center[J];Journal of Chongqing University of Science and Technology(Natural Sciences Edition);2013-05
6 LIU Linyan,WANG Huifen,LIU Tingting,LI Xinping,ZHOU Xifeng(School of Mechanical Engineering,Nanjing University of Science and Technology, Nanjing Jiangsu 210094,China);Research on Machine Tool Accuracy Design System Based on Joints Characteristics[J];Machine Tool & Hydraulics;2012-01
7 TONG Shuiguang WANG Xiangbing ZHONG Wei ZHANG Jian (Institute of Thermal Science and Power System,Zhejiang University,Hangzhou 310027);Dynamic Characteristics Analysis on Axial Piston Pump Based on Virtual Prototype Technology[J];Journal of Mechanical Engineering;2013-02
8 Tian Xueguang1,Wu Menghan2,Sun Lina2,Song Limin3(1.Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China;2.Changchun University of Science and Techn,Changchun 130022,China;3.Aviation University of Air Force,Changchun 130022,China);Modeling and Analysis of Positioning Error for Turntable Based on Huston Multibody Theory[J];Machine Design & Research;2013-04
9 ZHANG Yi,YANG Jian-guo(School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai 200240,China);Grey Neural Network Modeling for Machine Tool Thermal Error[J];Journal of Shanghai Jiaotong University;2011-11
10 LEI Xiao-bao,LIAO Wen-he,ZHANG Lin (College of Mechanical-Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China);Structural design and volumetric error model construction for two-spindle denture processing machine tool[J];Journal of Shenyang University of Technology;2011-02
【Citations】
Chinese Journal Full-text Database 3 Hits
1 REN Yong qiang, YANG Jian guo, DOU Xiao long, DENG Wei guo ( School of Mechanical and Power Eng., Shanghai Jiaotong Univ., Shanghai 200030, China);Analysis on the Error Synthesis Model of a Five-Axis Machine Center[J];Journal of Shanghai Jiaotong University;2003-01
2 LIU Youwu(Tianjin University,Tianjin,China) p 144 149;Applications of Multibody Dynamics in the Field of Mechanical Engineering[J];CHINA MECHANICAL ENGINEERING;2000-Z1
3 LIU Qi-dong, XU Chun-guang(1.Patent office of State lntellectual Property office, Beijing 100088, China; 2.School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing 100081,China);Analysis of Volumetric Error models for lathe-milling Center Based on Multi-body System Theroy[J];Modular Machine Tool & Automatic Manufacturing Technique;2005-05
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 GU Zhi-gang, CHEN Yong-xiang (College of Manufacture Science & Engineering, Southwest University of Science & Technology, Mianyang 621010, China);Error Compensation Technology of 3-Axis NC Machine Tools[J];Ordnance Industry Automation;2004-02
2 HU Zhangkun1.2,QIN Jiang1.2,YANG Shuwen1.2,LV Ronghua1(1.The 45th Institute of CETC,Beijing 101601 2.CETC Beijing Electronic Equipment CO.,LTD,Beijing 100176);Error Analysis on the Bridge-type Worktable of Dicing Saw[J];Equipment for Electronic Products Manufacturing;2010-10
3 LIU Yong-hong, YI Xiao-gang(Postdoctoral Working Station, Sany Heavy Industry, Changsha 410100, China);Flexible multiplex-dynamical modeling and analysis for truck-mounted concrete pump[J];Chinese Journal of Construction Machinery;2006-04
4 ZHAO Li-juan 1,2,WANG Tian-bo2,LIU Jie1,NING Zuo-jiang3(1.School of Mechanical Engineering and Automation,Northeastern University,Shenyang 110004,China;2.School of Mechanical Engineering, Liaoning Technical University,Fuxin 123000,China;3.Liaoning Provincial Machinery Research Institute Co.,Ltd.,Shenyang 110032,China);Review on dynamics of flexible multibody systems applied in roller milling industry[J];Chinese Journal of Construction Machinery;2006-04
5 CAI Jian-guo1,2 , HAN Zhi-hong3 , *FENG Jian1,2 , CAO Yun-feng1,2 , ZHANG Jin1,2 , WANG Feng-lan4 (1. Key Laboratory of C&PC Structures of Ministry of Education, Southeast University, Nanjing 210096, China; 2. Engineering Research Center for Prestress of Jiangsu Province, Nanjing 210096, China; 3. Radio, Film and Television Design and Research Institute, Beijing 100045, China; 4. Guangdong Electric Power Design Institute; Guangzhou 510663, China);APPLICATION OF DYNAMICS OF MULTI-RIGID BODY TO SEISMIC RESPONSE ANALYSIS OF STRUCTURES[J];Engineering Mechanics;2010-11
6 WANG Zhi-ming1,2,PENG An-hua1,WANG Qi-bing1(1.Engineering Training Center,Huaihai Institute of Technology,Lianyungang 222005,China;2.School of Mechanical and Power Engineering,Shanghai Jiaotong University,Shanghai 200240,China);Application of polynomial regression theory in thermal error modeling of machine tool[J];Journal of Lanzhou University of Technology;2007-06
7 LIN Wei-qing1,2,FU Jian-zhong1,XU Ya-zhou1,CHEN Zi-chen1(1.Department of Mechanical Engineering,Zhejiang University,Hangzhou 310027,China;2.College of Mechanical and Electrical Engineering,Fujian Agriculture and Forestry University,Fuzhou 350002,China);Optimal sensor placement for thermal error identification of NC machine tool based on LS-SVM and genetic algorithm[J];Optics and Precision Engineering;2008-09
8 HE Chun-yan1,2,LI Wei-min1,ZHANG Jian-jun1,HUANG Tian3(1.School of Mechanical Engineering,Hebei University of Technology,Tianjin 300401,China; 2.School of Information and Electrical Engineering,Hebei University of Engineering,Handan 056038,Hebei,China; 3.School of Mechanical engineering,Tijin University,Tianjin 300072,China);Study on Compensation Method of Geometric Error for Three-axis Machining Center[J];Acta Armamentarii;2012-12
9 LEI Chun-li1,2,RUI Zhi-yuan1,2,ZHAO Wei-ping3(1.Key Laboratory of Digital Manufacturing Technology and Application,The Ministry of Education,Lanzhou Univ.of Tech.,Lanzhou 730050,China;2.College of Mechano-Electronic Engineering,Lanzhou Univ.of Tech.,Lanzhou 730050,China;3.Lanzhou Exeter Electrical and Mechanical Technology Co.,Ltd.,Lanzhou 730050,China);New method for optimization of temperature measuring points on high-speed motorized spindle unit[J];Journal of Lanzhou University of Technology;2013-03
10 Shi Min Gao Cheng Mao Xianjun;Application of Compensation for Spindle Elongation in High-Speed NC Machine Tool[J];Aeronautical Manufacturing Technology;2010-22
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 GU Zhi-gang, CHEN Yong-xiang (College of Manufacture Science & Engineering, Southwest University of Science & Technology, Mianyang 621010, China);Error Compensation Technology of 3-Axis NC Machine Tools[J];Ordnance Industry Automation;2004-02
2 Dong Wanli1,Qu Dongcai2,Dong Weijie1(1.Administrant Brigade of Postgraduate,Naval Aeronautical & Astronautical University,Yantai 264001,China;2.Dept.of Control Engineering,Naval Aeronautical & Astronautical University,Yantai 264001,China);A PID Neural Network Control Strategy Based on GA-BP Algorithm[J];Ordnance Industry Automation;2011-02
3 Liu Yanbin Jin Guang Zhong Ping (Aerial Survey Department, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences,Changchun,130022);ERROR MODELING OF SIMULATION SYSTEM FOR AIRBORNE IMAGING[J];Acta Armamentarii;2003-04
4 LI Yan,FAN Da-peng(College of Electromechanical Engineering and Automation,National University of Defense Technology,Changsha 410073,Hunan,China);Error Analysis of Three-axis Turntable Aimed at Assembling Based on Multi-system Kinematics Theory[J];Acta Armamentarii;2007-08
5 Fan Jinwei;Tian Yue;Song Guorong;Huang Xudong;Kang Cunfeng (College of Mechanical Engineering and Applied Electronic Technology, Beijing Polytechnic University, Beijing, 100022 );Technology of NC Machine Error Parameter Identification Based on Fourteen Displacement Measurement Line[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;2000-02
6 Han Qiushi Wang Hongjun Zhang Huaicun Xu Baojie Zhu Jibei (Department of Mechanical Engineering, Beijing Institute of Machinery, Beijing 100085);MODERN CNC CAMSHAFT GRINDER CONTROLLED BY PC[J];JOURNAL OF BEIJING INSTITUTE OF MACHINERY;1998-04
7 WANG Shu-jun,HAN Qiu-shi,ZHONG Jian-lin(Department of Mechanical Engineering,Beijing Institute of Machinery,Beijing 100085,China);Variable-speed grinding of camshaft based on constant removal rate[J];Journal of Beijing Institute of Machinery;2006-02
8 ZHANG Fa-ping1,TONG Ying-xue 2,SUN Hou-fang1(1.School of Mechanical Engineering,Beijing Institute of Technology,Beijing 100081,China;2.Shashi University,Jingzhou,Hubei 434000,China);Error Modeling and Analysis of Workpiece Fixturing Scheme for Workpiece-Fixture System[J];Transactions of Beijing Institute of Technology;2009-11
9 LIU Yin-dong,BIAN Gang(School of Marine Engineering,Dalian University of Technology,Dalian 116024,China);Structure topology optimization and second development based on ANSYS[J];Journal of Ship Mechanics;2006-02
10 WANG Ying-shu,Ding Ning(Mechanical Engineering Collage,Changchun University,Changchun*"130022,China);The grinding force model of cylindrical traverse grinding[J];Journal of Changchun University;2005-06
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 YANG Hai-hui(Mechanical Department,Anhui Technical College of Mechanical & Electrical Engineering,Wuhu 241002,China);Analysis and Modeling of Errors for THG400 Horizontal Machining Center[J];Journal of Anhui Science and Technology University;2013-03
2 YANG Haihui(Mechanical Department,Anhui Technical College of Mechanical & Electrical Engineering,Wuhu Anhui 241002);Analysis and Modeling of Errors for THG400 Horizontal Machining Center[J];Journal of Chongqing University of Science and Technology(Natural Sciences Edition);2013-05
3 Li Xiaofang Sun Baosheng Si Zhijuan(School of Environmental Science and Engineering,Tianjin University,Tianjin 300072,China);Forecasting of urban wastewater discharge based on Gray-Markov Model[J];Chinese Journal of Environmental Engineering;2013-01
4 FAN Jin-wei,LI Wei,LI Yun,MENG Shun-zheng,LUO Tuo,LUO Jian-ping(Beijing University of Technology,Beijing 100124,China);Analysis of Volumetric Position Errors Based on Body Diagonals Vector Measurement on Vertical Machine Tools[J];Machinery Design & Manufacture;2013-02
5 LI Jingjing ZHOU Tao DUAN Jun ZHANG Lei(Institute of Nuclear Thermal-Hydraulic Safety and Standardization,North China Electric Power University,Beijing102206,China);Methods for discriminating gas-liquid two phase flow patterns based on gray neural networks and SVM[J];Nuclear Techniques;2013-02
6 ;加工中心工件坐标系原点确定方法的设计与探讨[J];;2013-11
7 Tian Xueguang1,Wu Menghan2,Sun Lina2,Song Limin3(1.Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China;2.Changchun University of Science and Techn,Changchun 130022,China;3.Aviation University of Air Force,Changchun 130022,China);Modeling and Analysis of Positioning Error for Turntable Based on Huston Multibody Theory[J];Machine Design & Research;2013-04
8 Sun Lunye,Xu Zhengyang,Zhu Di(College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016);The Accuracy Control of Ni-Based Superalloy Blisk Channels by Electrochemical Machining[J];Mechanical Science and Technology for Aerospace Engineering;2013-08
9 JIANG Hui,YANG Jian-guo,LI Zi-han,YAO Xiao-dong(School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai 200240,China);Application of Real Time Compensation with Combinative Thermal Error Prediction Model Based on Error Separation on CNC Machine Tools[J];Journal of Shanghai Jiaotong University;2013-05
10 YANG Yi1,YAO Xiao-dong1,YANG Jian-guo1,ZHANG Yu-sheng2,YUAN Feng2(1.School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai 200240,China; 2.Shanghai Aerospace Equipments Manufacturer,Shanghai 200240,China);Thermo-Drifting Error Modeling of Spindle Based on Combination of Principal Component Analysis and BP Neural Network[J];Journal of Shanghai Jiaotong University;2013-05
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Wang Yiding; Zhang Guoxiong; Zang Yanfen; Chu Xiaohua; Du Junwen (Tianjin University, Tianjin 300072);Compensation Model of Position Accuracy for CNC Manufacturing Center[J];ACTA METROLOGICA SINICA;1995-03
2 Bi Hai, Kong Deren, Zhu Mingwu(Nanjing University of Science & Technology, Nanjing 210094));A Least Square Method Based on Walsh Functionfor Dynamic Modeling and Its Application[J];ACTA METROLOGICA SINICA;1998-01
3 Zhao Xiaosong (Tianjin University) Liu Libing (Hebei University of Technology) Zhang Qing, Liu Youwu (Tianjin University);ERROR MODEL AND PARAMETERS IDENTIFICATION OF 4-AXIS MACHINING CENIER[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;2000-10
4 Su Shiping Li Shengyi Wang Guilin National University of Defense Technology;IDENTIFICATION METHOD FORERRORS OF MACHINING CENTERBASED ON VOLUMETRICERROR MODEL[J];Chinese Journal of Mechanical Engineering;2002-07
5 Wu Hongtao Wang shuxin Zhang Dajun Liu Youwu (Dept. of Mechanical Engineering);ON THE EQUIVALENCY OF EQUATIONS APPROACH OF MULTI-RIGID-BODY SYSTEM DYNAMICS[J];Journal of Tianjin University;1993-03
6 ZHAO Xiao song 1, GUO Hong qi 2, LIU You wu 2 (1.State Key Laboratory of Precision Measuring Technology and Instruments,Tianjin University, Tianjin 300072,China; 2.School of Mechanical Engineering,Tianjin University,Tianjin 300072,China);ERROR MODEL OF NC MACHINE TOOL[J];Journal of Tianjin University;2001-06
7 Liu Youwu Wang Jianming Liu Caishan Zhang Dajun(School of Mechanical Engineering,Tianjin University) Zhou Xuejun(Shandong Civil Engineering Institute,Jinan 250014);DYNAMIC ANALYSIS OF FLEXIBLE MULTIBODY SYSTEMS WITH DYNAMIC STIFFNESS[J];Journal of Tianjin University;1998-04
8 Zhang Dajun; Zhang Haigen; Liu Youwu (Tianjin University)Huston Ronald L(The university of Cincinnati, USA);A GENERAL PROCEDURE TO CAPTURE THE "DYNAMIC STIFFNESS[J];天津大学学报(英文版);1995-01
9 Liu Caishan Liu Youwu Wang Jianming (Mechanical Department of Tianjin University);DYNAMIC MODELING AND VARIABLE STRUCTURE CONTROL OF A FLEXIBLE BEAM[J];Journal of Vibration and Shock;1998-01
10 Liu Youwu Wang Jianming Liu Caishan Zhang Dajun (School of Mechanical Engineering, Tianjin University Tianjin, 300072);Dynamic Analysis of Spatial Truss Structures Undergoing Large Overall Motion[J];JOURNAL OF VIBRATION ENGINEERING;1998-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved