Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《JOURNAL OF SHANGHAI JIAOTONG UNIVERSITY》 1999-06
Add to Favorite Get Latest Update

ICM Method for Topology Optimization Design of Continuum Structures

YANG De qing 1, LIU Zheng xing 1, SUI Yun kang 2 1.School of Civil Engrg. & Mech., Shanghai Jiaotong Univ., Shanghai 200030, China; 2.Beijing Polytechnic Univ., Beijing 100022, China  
Based on the ICM (independent continuous topological variables and mapping transformation) method, a unified smooth model with weight objective and stress constraints was established for the topology optimization design of continuum structures. The corresponding high efficient element deletion criterion and algorithm which take account of the comprehensive results of force transfer were introduced. The presented typical 2D and 3D examples show the simplicity, fast convergence and reliability of the proposed method.
【CateGory Index】: TU318
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 9 Hits
1 SUN Zhengfeng;MIN Xiying;LI Xishun;Chengdu Aerospace Mould & Plastic Co.,Ltd.;;Topology Optimization Study for Automobile Plastic Front-end Frame[J];汽车零部件;2017-08
2 Zhou Xinjian;Wang Ruofei;Wu Zhiheng;Ruan Hang;Hu Weidong;Key Laboratory of Conveyance and Equipment of the Ministry of Education,East China Jiaotong University;Guangdong General Research Institute for Industrial Technology;;Topological Optimization of Column Structure in Vertical Machining Center Based on Hypermesh[J];华东交通大学学报;2013-06
3 Dong Ruixing,Chen Puhui(Key Laboratory of Fundamental Science for National Defence-advanced Design Technology of Flight Vehicle,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China);Topology Optimization of the Wing Rib Based on Stress Constraints and Software Secondary Development[J];航空工程进展;2012-02
4 Song Zongfeng Chen Jianjun Lin Liguang Zhu Zengqing Liu Guoliang (School of Electromechanical Engineering,Xidian University,710071,Xi'an,China);Topology Optimization Design of Random-Interval Model Based on Interval Factor Method[J];应用力学学报;2009-02
5 SONG ZongFeng CHEN JianJun ZHU ZengQing LIU GuoLiang(School of Electronic Mechanical Engineering,Xidian University,Xi'an 710071,China);TOPOLOGY OPTIMIZATION DESIGN OF PLANAR ELASTIC CONTINUUM BASED ON NON-PROBABILISTIC RELIABILITY[J];机械强度;2008-06
6 WANG Lie-long1,2,ZHU Zhuang-rui1(1.College of Mechanical Engineering,Southeast University,Nanjing 210096,China;2.Department of Mechanical and Electrical Engineering,Chizhou Institute,Chizhou 247000,China);Optimal dynamic topology design of mechanical tool column with relative density[J];机电工程;2008-04
7 Li Zhixin1 Li Xiaoqing1 Chen Xuedong1 Chen Lumin2(1 The State Key Laboratory of Digital Manufacturing and Equipment,Huazhong University of Scienceand Technology,Wuhan 430074,China;2 College of Mechanical and Electrical Engineering,Zhengzhou University of Light Industry,Zhengzhou 450002,China);The study on the continuum structure topology optimization method based on the frequency constrain[J];华中科技大学学报(自然科学版);2008-02
8 YU Xing-lin,JIN Da-feng,WANG Lei(State Key Laboratory of Automobile Safety and Energy Saving,Qinghua Univesity,Beijing 100084,China);Development on new structure of super minityped car body[J];机械设计;2007-11
9 LI Lei1,HONG Rongjing1,ZHANG Jianrun2,SUN Qinghong2,PENG Wen3,YAO Shujian3(1.Department of Mechanical Eng.,Nanjing University,Nanjing 210009,China;2.Department of Mechanical Eng.,Southeast University,Nanjing 210096,China;3.Jiangsu Duo Leng CNC Machine Tool CO.,Changzhou Jiangsu 213012,China);Topology Optimization of a Column Model of the Vertical Milling Center[J];机床与液压;2007-04
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 CAI Zhangheng;MU Xuelei;YANG Jingjing;Research & Development Center of Great Wall Motor Company;Automotive Engineering Technical Center of Hebei;;Finite Element Analysis for Plastic Front End Bracket[J];汽车零部件;2016-12
2 SUN Yuhong;HU Yuanhang;QI He;MU Xuelei;Research & Development Center of Great Wall Motor Company;Automotive Engineering Technical Center of Hebei;;Mechanical Analysis and Optimization of Automobile Front-end Module[J];汽车零部件;2016-03
3 ;Topology Optimization Design of Automobile Front-end Module's Top Beam[J];汽车工程师;2015-09
4 Feng Jie,Chen Beibei(1.The Urban Mass Transit & Railway Research Institute,Tongji University,Shanghai 201804,China;2.Ship Repair Department,Shanghai Shipyard Co.,Ltd.,Shanghai 202100,China);Sensitivity Analysis of Torsion Mode Frequency of Car Rear Door Based on Hyperworks Software[J];华东交通大学学报;2012-05
5 Ding Sufang1,Tuo Haifeng2(1 Ningbo Technical College,Ningbo 315033,Zhejiang,China; 2 Qoros Automotive Co.Ltd.,Shanghai 200120,China);The stiffness study of automobile plastic front-end module frame[J];现代制造工程;2012-04
6 SUI Yun-kang,XUAN Dong-hai,YE Hong-ling,TIE Jun(Beijing University of Technology,Beijing 100124,China);Structural topology optimization method using high accuracy approximation of the step function[J];计算力学学报;2010-06
7 XIONG Chu-yang1,CHEN Wu-yi1,GUO Shi-jun2(1School of Mechanical Engineering and Automation,Beihang University,Beijing 100084,China)(2Department of Aerospace,Cranfield University,England MK43 OAL);A structural topology optimization approach based on ESO algorithm[J];机械设计与制造;2009-10
8 YIN Yu-zhen,JIANG Su-qing(Jiangsu Finance & Economics College of Vocational Technology,Jiangsu Huai'an,223002,China);The Topological Optimization Design of Vertical Milling Center XH715[J];中国制造业信息化;2008-19
9 JIANG Su-qing1,DU Juan2(1.Department of Mechanical Engineering,Southeast University,Nanjing 223001,China;2.Guannan Xinan Primary School,LianYungang 222500,China);Topological Optimization Design of Vertical Machining Center Based on HyperMesh[J];工业计量;2008-01
10 Luo Yangjun Kang Zhan (State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, China);NON-PROBABILISTIC RELIABILITY-BASED TOPOLOGY OPTIMIZATION OF CONTINUUM STRUCTURES[J];力学学报;2007-01
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Liguo;WANG Guan;Faculty of Aerospace Engineering, Shenyang Aerospace University;;Topology Optimization of a Solar UAV Rib under Multiple Operating Conditions[J];机械工程师;2018-09
2 Li Yinglei;Cao Zongjie;;Research on Topology Optimizations for Aircraft Structure[J];机械制造;2018-07
3 CHEN Min;ZHANG Hua-wei;CHEN Qi-yu;MAO Lu-yao;LIN Jian-xin;Guangdong Intelligent Manufacturing Research Institute;Guangzhou Xinnan CNC Technology Co.,Ltd.;;Finite Element Analysis and Optimized Design of the Gantry Machining Center Crossbeam[J];机电工程技术;2018-04
4 WANG Ming-qiang;JI Fei-fei;WANG Guo-liang;LIU Zhi-qiang;School of Mechanical Engineering,Jiangsu University of Science and Technology;;Research on the Progressive Topology Optimization of Cutting Force Platform Structure[J];机械设计与制造;2018-04
5 WANG Mingqiang;JI Feifei;WANG Guoliang;LIU Zhiqiang;School of Mechanical Engineering,Jiangsu University of Science and Technology;;Topology optimization design and experimental study on the elastic body structure of micro cutting force measuring platforms[J];江苏科技大学学报(自然科学版);2018-01
6 NIU Lei;SUN Pengwen;LI Shuangrong;School of Mechanical Engineering,Inner Mongolia University of Technology;;Topology Optimization Design of Wing Rib Based on ICM Method[J];内蒙古工业大学学报(自然科学版);2018-01
7 WANG Wen-sheng;WEI Hao-jie;HOU Zhong-hua;WANG Zhan-lei;MEI Qun;Department of Engineering Mechanics, Henan University of Science and Technology;;Influence of flanged-cutout on the natural frequencies of a rectangular plate[J];船舶力学;2017-11
8 XING Yipeng;WANG Lei;School of Mechanical and Automotive Engineering, Anhui Polytechnic University;;Pillar Structure Analysis and Topology Optimization of Vertical Bulging Machine[J];新乡学院学报;2017-09
9 ZHENG Wen-biao;PENG Jin-min;School of Mechanical Engineering and Automation,Fuzhou University;School of Mechanical and Automotive Engineering,Fujian University of Technology;;Lightweight Design of the Column of Horizontal Machining Center[J];组合机床与自动化加工技术;2017-08
10 ZENG Feng;SUN Lei;Guangdong Polytechnic of Industry and Commerce;School of Material Science and Engineering, Shanghai Jiao Tong University;;Study on Microstructure and Properties of Welded Joint of HT200 Gray Iron for Machine Tools with Different Electrodes[J];热加工工艺;2017-15
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved