Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Hot Working Technology》 2014-18
Add to Favorite Get Latest Update

Hot Compression Behaviors of C_(sf)/Mg Composite and Its Constitutive Relation

ZHANG Liang;WANG Zhenjun;SHANG Hongfu;ZHU Shixue;National Defence Key Discipline Laboratory of Light Alloy Processing Science and Technology, Nanchang Hangkong University;  
Csf/Mg composite prepared by vacuum infiltration method was hot compressed on Gleeble1500 D simulator.The plastic deformation behavior was investigated at 596-696 K, strain rate of 5×10-3- 5×10-1s-1and the largest true strain of0.6. According to the experiment results, a strain compensated constitutive model was established by multivariate nonlinear regression method. The disadvantage of Arrhenius model only calculating the peak stress and steady state stress was overcomed. The results show the average error of the flow stress calculated by the established constitutive model and the experiment one is only 8.95%,and then the correlation coefficient is 0.9549.
【Fund】: 国家自然科学基金资助项目(51365043);; 西北工业大学凝固技术国家重点实验室开放基金资助项目(SKLSP201228);; 南昌航空大学轻合金加工科学与技术国防重点学科实验室开放基金资助项目(GF201301007)
【CateGory Index】: TB333;TB302
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 1 Hits
1 Cheng Yu Guo Cheng Guo shengwu Chen Jinde (Xi′an Jiaotong University,710049,Xi′an);Constitutive Equation of Metal Matrix Composites Reinforced by SiC Particles[J];Journal of Xi'an Jiaotong University;1998-09
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 TIAN Long ZHU Yang-fang TIAN Qing(School of Mat & Chem. Engr, Xi'an Inst of Tech, Xi'an 710032, China);Study on the orthorhombic experiment of the AlN/ZL101 In Situ composite[J];Journal of Anyang Institute of Technology;2006-06
2 Zhao Yuhou, Yan Wen ,Zhou Jing'en;INFLUENCE OF Si AND Mg ON SHAPE OF Al_3Ti REINFORCING PHASE IN IN-SITU Al-BASED COMPOSITE[J];Ordnance Material Science and Engineering;2001-02
3 LIU Bai 1,2, DENG Fu-ming 1, Q Jing-xin 1 (1.Department of Materials Science and Engineering, University of Mining and Technology,Beijin 100083, China; 2.Department of Mechanical Engineering, Changsha University, Changsha 410003,China);Design and research of carbon nanotubes reinforced aluminum matrix composite[J];Ordnance Material Science and Engineering;2003-06
4 ZHANG Jian-yun, WANG Lei, ZHOU Xian-liang, HUA Xiao-zhen (Department of Material Engineering, Nanchang Institute of Aeronautical Technology, Nanchang 330034, China);Thermophysical properties of high volume fraction SiC_p/Al composite[J];Ordnance Material Science and Engineering;2006-03
5 MA Yunzhu,HUANG Qianfang,LIU Wensheng (State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Research progress of coatings on fiber-reinforcements in metal matrix composite[J];Ordnance Material Science and Engineering;2011-04
6 CHEN Xinhua,ZHAI Hongxiang,HUANG Zhenying(School of Mechanical Electronic and Control Engineering,Beijing Jiaotong University,Beijing 100044,China);Preparation and properties of TiC_x/Fe(Al,Ti) composites[J];Journal of Beijing Jiaotong University;2011-06
7 Lü Yizhong(Beijing Vocational & Technical Institute of Industry,Beijing 100042,China);Application of Aluminum Base Composite Material in Traffic Conveyance[J];Journal of Beijing Vocational & Technical Institute of Industry;2006-01
8 DING Jian, ZHAO Naiqin, SHI Chunsheng, LI JiajunSchool of Materials Science and Engineering, Tianjin University, Tianjin 300072, China;Effect of nano ZrO_2 crystal structure on copper matrix composite interface[J];Journal of University of Science and Technology Beijing;2007-02
9 LIU Zhen-gang, LIU Yi-han, LUO Hong-jie, YAO Guang-chun (School of Materials & Metallurgy, Northeastern University, Shenyang 110004, China);Technology for Electroless Copper Plating on Graphite Powders and Its Efficacy[J];Materials Protection;2009-05
10 BIAN Tao PAN Yi (Material and Chemical Engineering College,Zhejiang University ,Hangzhou 310027) CUI Yan YI Xiaosu (Beijing Institute of Aeronautical Materials,National Key Laboratory of Advanced Composites,Beijing 100095);Fabricating Metal Matrix Composites by Spontaneous Infiltration Technique[J];Materials Review;2002-01
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Zhang Yongchang (Institute of Metal Research, Academic Sinica) Bai Lihua (Northeastern University of Technology);RECENT DEVELOPMENTS IN SPRAY DEPOSITION OF METALS[J];Ordnance Material Science and Engineering;1993-01
2 ;The Progress of Inconel 706 Alloy Abroad[J];Materials Review;1995-05
3 Fuxiao CHEN; Juanhua SU; Yunlin YANG and Hongtao in Dept. of Material and Engineering, Luoyang institute of Technology, Luoyang 417039, China;Research on Superplasticity and Superplastic Extrusion of MB26 Magnesium Alloy[J];材料科学技术(英文版);2001-01
4 Cai Dayong, Xiong Liangyin, Sun Guidong, Liu Wenchang, Yao Mei ( State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China) ( Liming Engine Group Co., Shenyang 110000, China);Study on the Hot Deformation Behaviour of Superalloy GH708[J];Rare Metal Materials and Engineering;2006-S2
5 Liu Pengfei1, Liu Dong1, Luo Zijian1, Sun Wenru2, Guo Shouren2, Hu Zhuangqi2 (Northwestern Polytechnical University, Xian 710072, China) (Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110016, China);Flow Behavior and Dynamic Recrystallization Model for GH761 Superalloy during Hot Deformation[J];Rare Metal Materials and Engineering;2009-02
6 LI Qi1,YI You-ping1,LIU Yong2(1.School of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China; 2.State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Effect of ultrasonic vibration on densification of iron powder compact[J];Materials Science and Engineering of Powder Metallurgy;2011-01
7 LIU Wen-sheng,ZHANG Jia-jia,MA Yun-zhu,HE Liu-qing(State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Extrusion molding of tungsten based alloy powders[J];Materials Science and Engineering of Powder Metallurgy;2011-01
8 TAN Dun-qiang,YANG Xiao-xia,LIU Bing-fa (School of materials science and engineering,Nanchang university,Nanchang Jiangxi 330031,China);STUDY ON COMPACT FORMING OF W-Cu NANO-COMPOSITE POWDER[J];Powder Metallurgy Industry;2010-03
9 HE Yiqiang (College of Mechanical Engineering,Huaihai Institute of Technology,Lianyungang 222005,China);SiC_P/Al-8.5Fe-1.3V-1.7Si composites prepared by multi-layer spray co-deposition[J];Acta Materiae Compositae Sinica;2012-02
10 Gui Manchang Wang Dianbin Zhang Hong (Institute of Aeronautical Materials, Beijing 100095,PRC);Application of Particle-Reinforeced Aluminum Composites in Automotive Industry[J];Materials For Mechanical Engineering;1996-06
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved