Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Hot Working Technology》 2015-10
Add to Favorite Get Latest Update

Effect of Alloy Elements on Precipitation Behavior of Carbides in High-carbon Alloy Tool Steels Based on Computer Simulation

YU Xiaolan;Wu Han Polytechnic;  
By using the equilibrium thermo-dynamic calculation method Thermo-Calc software,the effects of Cr,W,Mo,V alloy elements on the carbide formation in high-carbon alloy tool steel were studied.The results show that,the type of carbides precipitated in steel matrix are mainly M23C6,M6 C,M7C3,MC,the order of carbide precipitation temperature are:MCM6CM7C3M23C6.With the increase of Cr content,M23C6,M7C3 precipitation temperature increases,M6 C,MC precipitation temperature is not affected,the carbides content shows a linear increasing trend.With the increase of W content,M23C6,MC precipitation temperature is not affected,M6 C,M7C3 precipitation temperature increases; a very small influence on the content of M23C6,MC,and M6 C,M7C3 content shows a linear increase.With the increase of Mo content,M23C6,MC,M7C3 precipitation temperature is not affected,the precipitation temperature of M6 C increases; M23C6,MC content decreases slightly,the content of M6 C increases linearly,the content of M7C3 decreases obviously.With the increase of V content,M23C6 precipitation temperature increases,M6 C precipitation temperature is not affected,the precipitation temperature of M7C3decreases; M23C6,M7C3 carbide content decreases,while M6 C,MC content increases linearly.
【CateGory Index】: TG142.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 1 Hits
1 CHEN Xiaofei;YAO Zhihao;HUANG Jinfeng;ZHANG Jin;DONG Jianxin;School of Materials Science and Engineering,University of Science and Technology Beijing;State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing;Institute for Advanced Materials and Technology,University of Science and Technology Beijing;;Thermodynamic calculation of precipitated phase in 25Cr3Mo2NiWVNb steel[J];中国科技论文;2017-10
Chinese Journal Full-text Database 3 Hits
1 LI Tiansheng1,2,WANG Fuming1,ZHANG Guoqing1(1.School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing 100083,China;2.School of Mechanical Engineering,Hunan Institute of Technology,Hengyang 421008,China);Thermodynamic Study on Nb-microalloyed High Mo Hot-work Die Steel[J];热加工工艺;2012-23
2 WU Hua-chun,LI Ming-yao,DONG Li-tao,ZHU Xiang-li(School of Materials Engineering Shanghai University of Engineering and Technology University,Shanghai 201620,China);Performance analysis of cold die material and its application[J];机械设计与制造;2011-01
3 QI Zheng-feng,REN Rui-ming(Dalian Jiaotong University,Dalian Liaoning 116028,China);Development of cutting tool materials at home and abroad[J];金属热处理;2008-01
Chinese Journal Full-text Database 8 Hits
1 ZHU Gang;XIE Ming;LIU Ying;ZHU Shaowu;ZHANG Jiming;ZHOU Limin;State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Kunming Institute of precious Metals;School of Materials Science and Engineering,Sichuan University;;High Temperature Anti-oxidation Mechanism of Ti(C,N)/AlCoCrFeNi Cermets[J];材料科学与工程学报;2017-01
2 CHEN Ya-xiang;ZHU Shi-gen;College of Mechanical Engineering,Donghua University;;Experimental Study on Improving Section Scratch of Fine Blanking Needles[J];机械设计与制造;2017-01
3 LI Luna;CUI Xiaoyong;JIANG Hongjing;SHAO Kunyu;Nanjing Institute of Mechatronic Technology;Nanjing Superior Die Technology Co.,Ltd.;;Research on Manufacturing Process of Parts of the Stamping Die[J];新技术新工艺;2016-12
4 Chen Lin;Department of Mechanical Engineering, Changjiang Engineering Vocational College;;Study on the selection of blanking materials and heat treatment process[J];佳木斯职业学院学报;2016-12
5 GAO Yunfang;ZENG Xianjun;YAO Jianhui;Xingtai Polytechnic College;;Effect of Tempering on Precipitation Behavior of Carbides in New-type Machine Tool Steel[J];热加工工艺;2016-20
6 CHEN Chen;LI Jiexiao;LI Zhongwen;WANG Wei;School of Materials Engineering,Shanghai University of Engineering Science;;Study on Microstructre and Properties of M2 High Speed Steel Treated by Repeated Cryogenic Treatment[J];热加工工艺;2015-18
7 YU Xiaolan;Wu Han Polytechnic;;Effect of Alloy Elements on Precipitation Behavior of Carbides in High-carbon Alloy Tool Steels Based on Computer Simulation[J];热加工工艺;2015-10
8 Zhou Yongkun;Zhao Xianrui;Wang Xiaojun;School of Electric and Electronic Engineering,Zhejiang Industry Polytechnic College;College of Physics and Electronic Engineering,Taizhou University;Taizhou Delitong Tool Manufacturing Co. ,Ltd.;;Heat treatment process and cutting performance of M2 high speed steel drill[J];金属热处理;2015-05
Chinese Journal Full-text Database 10 Hits
1 LI Yong-liang;WANG Fu-ming;LI Chang-rong;YANG Zhan-bing;HE Yu-tian;ZHENG Ya-xu;School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing;School of Materials Science and Engineering,University of Science and Technology Beijing;;Influence of vanadium on the microstructure refinement of high strength automobile beam steel[J];工程科学学报;2016-08
2 YU Xiaolan;Wu Han Polytechnic;;Effect of Alloy Elements on Precipitation Behavior of Carbides in High-carbon Alloy Tool Steels Based on Computer Simulation[J];热加工工艺;2015-10
3 XU Hui;College of Mechanical Engineering,Hunan Institute of Technology;;Effect of Alloying Elements on Precipitation in 8407 Steel by Thermo-calc Software[J];热加工工艺;2014-24
4 GONG Chang-hong;YANG Yun-fei;HUANG Lin-hao;Self-propelled Artillery Department,Wuhan Ordnance Non-commissioned Officer Academy;;Modern Artillery Bore Erosion Wear Mechanism and Control Measures[J];四川兵工学报;2014-11
5 Tianlong Liu;Lijia Chen;Hongyun Bi;Xin Che;School of Materials Science & Engineering, Shenyang University of Technology;State Key Laboratory of Development and Application Technology of Automobile Steels, Baosteel Group;;Effect of Mo on High-Temperature Fatigue Behavior of 15CrNbTi Ferritic Stainless Steel[J];Acta Metallurgica Sinica(English Letters);2014-03
6 WEN Tao;HU Xiaofeng;SONG Yuanyuan;YAN Desheng;RONG Lijian;Institute of Metal Research,Chinese Academy of Sciences;;EFFECT OF TEMPERING TEMPERATURE ON CARBIDE AND MECHANICAL PROPERTIES IN A Fe-Cr-Ni-Mo HIGH-STRENGTH STEEL[J];金属学报;2014-04
7 Li Chun-Xia;Dang Sui-Hu;Wang Li-Ping;Zhang Cai-Li;Han Pei-De;Key Laboratory of Interface Science and Engineering in Advanced Materials of Ministry of Education,Taiyuan University of Technology;College of Materials Science and Engineering, Taiyuan University of Technology;College of Physics and Electronic Engineering, Yangtze Normal University;;Effect of Cr, Mo, and Nb additions on intergranular cohesion of ferritic stainless steel: First-principles determination[J];Chinese Physics B;2014-03
8 LV Yan,HU Jun,REN Zening,HUANG Jianwen,LI Mian(Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China);Progress in steel used for large-calibre thick-wall gun barrel[J];兵器材料科学与工程;2013-02
9 WANG Mao-qiu 1, DONG Han 1, WANG Qi 1, LI Jian-xin 2, ZHAO Long 3 (1 Central Iron & Steel Research Institute, Beijing 100081,China; 2 Fushun Special Steel Co Ltd, Fushun 112001,China; 3 Chongqing Chang'an Automobile Co Ltd, Chongqing 400023,China);Microstructures and mechanical properties of high strength gun steels[J];兵器材料科学与工程;2003-02
10 WANG Mao-qiu1,DONG Han1,WANG Qi1,LI Jian-xin2,ZHAO Long3 (1.Central Iron & Steel Research Institute,Beijing 100081,China;2.Fushun Special Steel Co.Ltd, Fushun Liaoning 112001,China;3.Chongqing Chang'an Automobile Co.Ltd,Chongqing 400023,China);Impact Toughness of Secondary Hardening Steel 25Cr3 Mo3NiNb[J];金属热处理;2003-03
【Secondary References】
Chinese Journal Full-text Database 1 Hits
1 ZHANG Xing;LU Haiming;LI Chuanwei;GU Jianfeng;Institute of Materials Modification and Modelling,Shanghai Jiao Tong University;Materials Genome Initiative Center,Shanghai Jiao Tong University;Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration,Shanghai Jiao Tong University;Shanghai Key Laboratory of Materials Laser Processing and Modification,Shanghai Jiao Tong University;;Phase field molding on the morphologies and growth kinetics of grain boundary ferrite allotriomorphs[J];中国科技论文;2018-04
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 CHEN Ying-wei,WU Xiao-chun,SONG Wen-wen,MIN Yong-an(College of Materials Science and Engineering,Shanghai University,Shanghai 200072,China);Effect of carbide evolution on thermal-stability in Nb-microalloyed hot work steel[J];材料热处理学报;2010-05
2 ;Material Selection and Heat Treatment for Cold-Working Die Steel[J];模具制造;2008-06
3 LIU Xian-lan~(1,2) ZHANG Wen-yu~2 (1.School of Material Science and Engineering,Central South University,Changsha 410083,China; 2.Department of Mechanical Engineering,Hunan Institute of Technology,Hengyang 421002,China);Selection and application of cold working die steel[J];锻压技术;2007-06
4 LIU Bing CAI Jian-guo JULAITI·Maitirouzi (Xinjiang University,Urumqi 830008,China);Anneal Structure and Properties of a High-carbon and High-alloy Cold Work Die Steel[J];机械工程材料;2006-09
5 XIE Nian-suo,WANG Jin(Shanxi University of Science and Technology,Hanzhong 723003,Shanxi,China);Developing Situation of Cemented Carbide Industry and its Resources Protection of China[J];中国钨业;2006-03
6 ;Progress in variation of cutting tool and the materials in the world[J];世界制造技术与装备市场;2006-02
7 ZHOU JIan-hua,LU Wei-min(Powder Metallurgical Factory of Central-south University,Changsha 410083,China);Analysis of Present Production and Latest Development of Cemented Carbide both at Home and Abroad[J];稀有金属与硬质合金;2006-01
8 WANG Xiao-jin(Nanchang Cemented Carbide Limited Liability Company,Jiangxi Nanchang 330013,China);Research and Application of Ultrafine Grain Cemented Carbide[J];江西冶金;2006-01
9 Han Xiaoyong (Baosteel Meishan Company Technical Centre);Functions of Nb,V and Ti in Micro-alloyed Steel[J];宽厚板;2006-01
10 Li Zhengbang(Central Iron and Steel Research Institute,Beijing 100081);Analysis on Strategy to Develop High Speed Steel in China[J];特殊钢;2006-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved