Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Plastics Industry》 2012-02
Add to Favorite Get Latest Update

Comparison on Properties of EP and UP for Wind Turbine Blade Use

LIU Kui,FENG Xue-bin,LEI Zhi-min,LIU Bao-liang,YANG Yue-hua(Zhuzhou Times New Materials Science and Technology Co.,Ltd.,Zhuzhou 412007,China)  
The performance of epoxy resin and unsaturated polyester resin was compared.Through the resin viscosity-time curve test,unsaturated polyester′s viscosity throughout the operating area changed little with excellent control of the process.The difference between the two resins was studied though the two resin fracture surfaces observation by SEM and mechanical properties testing.Results showed although the bending strength and compression strength of unsaturated polyester were higher,the average rate as 2.41%of elongation at break was far from 8.71% which was much lower than that of the epoxy resin.analysis of the glass transition temperature showed unsaturated polyester′s free volume within the lower tension in the body can not by groups within the movement of molecules to reduce the tensile stress within the system,so the body brittleness increased and lead to a limited use when material was in the large deformation.
【Fund】: 国家863计划资助项目(2007AA03Z563);; 湖南省重大科技专项资助项目(2009FJ1002)
【CateGory Index】: TQ323.5
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 2 Hits
1 YIN Qi,HUANG Wen-yan,JIANG Bi-biao,LIAN Wei-chang,DING Hao(College of Material Science and Engineering,Jiangsu Polytechnic University,Changzhou 213164,China);Studies on the Low-shrinkage and Dyeability of Unsaturated Polyester[J];China Plastics Industry;2010-02
2 LIU Lin DAI Guang-yu LI Wen-feng (Institute of Materials Science and Engineering,Tongji University,Shanghai 200092,China);Application and Development of High Performance Thermosetting Matrix Resin in Aviation and Aerospace Fields[J];China Plastics;2008-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Wang Tingwei,Chen Yifan,Guo Yong (Nanjing University of Chemical Technology 210009);STUDY ON DIELECTRIC PROPERTIES OF LOW LOSS COMPOSITES AT HIGH FREQUENCY[J];Engineering Plastics Application;1997-03
2 Yang Baolin 1,2,3, Yan Fengyuan 1, Li Bo 2(1. State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China; 2. Department of Material Science, Lanzhou University, Lanzhou 730000, China; 3. Lanzou Carbon Co. Ltd., Lanzhou 730084, China);TRIBOLOGICAL BEHAVIORS OF PPS[J];Engineering Plastics Application;2004-11
3 Liu Zhengjun, Han Keqing, Zhou Hongmei, Du Binggong, Yu Muhuo (College of Materials Science and Engineering, Donghua University, Shanghai 200051, China);STUDIES ON MECHANICAL PROPERTIES OF LONG GLASS FIBER REINFORCED PA6[J];Engineering Plastics Application;2005-05
4 Huang Bofen1, Zhang Guoqiang1,Wang Ying2(1.Institute of Material Science and Engineering,Nanchang University,Nanchang 330031,China;2.Nanchang Institute of Technology,Nanchang 330029,China);EFFECT OF EPDM-g-MAH ON PROPERTIES OF PA6/ABS ALLOY[J];Engineering Plastics Application;2007-11
5 Zhou Wenjun1,2,Chen Lingxia1,Shen Jianwei1,Zhou Xiaodong1(1.State Key Laboratory of Chemical Engineering,East China University of Science and Technology,Shanghai 200237,China;2.School of Materials Science and Engineering,East China University of Science and Technology,Shanghai 200237,China);STUDY ON MODIFICATION OF MMA/PMOE COPOLYMER[J];Engineering Plastics Application;2008-07
6 Liu Lin, Dai Guangyu, Li Wenfeng, Wang Chong(School of Materials Science and Engineering, Tongji University, Shanghai 200092, China);STUDY ON STRUCTURE AND PROPERTIES OF CYANATE/EPOXY ESTER BLENDS[J];Engineering Plastics Application;2008-10
7 Liu Lin,Dai Guangyu,Li Wenfeng(School of Materials Science and Engineering,Tongji University,Shanghai 200092,China);HEAT RESSTANT AND MOSTURE ABSORPTON PROPERTY OF EPOXY/CYANATE ESTER BLEND[J];Engineering Plastics Application;2009-01
8 Xiao Jianhua (School of Material Science and Engineering,Nanchang Hangkong University,Nanchang 330063,China);THEORETIAL PREDICT AND EXPERIMENTAL RESEARCH OF PRODUCT DIAMETER IN GAS-ASSISTED EXTRUSION[J];Engineering Plastics Application;2009-05
9 Xu Yingqiang,Yang Shaohui,Li Zhaopeng,Fu Canping,Zhang Yanchang,Fu Peng,Liu Minying,Wang Yudong,Zhao Qingxiang(School of Materials Science and Engineering,Zhengzhou University,Zhengzhou 450002,China);MECHANICAL PROPERTY AND MICROCOSMIC STRUCTURE OF PA1111/SEBS-g-MAH BLENDS[J];Engineering Plastics Application;2009-06
10 Liu Xiao(Shandong Rongcheng Entry-Exit Inspection and Quarantine Bureau,Rongcheng 264300,China);APPLICATION OF DYNAMIC MECHANICAL THERMAL ANALYSIS ON POLYMER MATERIAL[J];Engineering Plastics Application;2010-07
China Proceedings of conference Full-text Database 10 Hits
1 LI Guodong~1,DU Qiyun~2,WANG Wei~1,REN Lianjuan~1,DIAO Bo~1 (1.Key Laboratory for Hollow Fibre Membrane Materials and Membrane Process,Ministry of Education,Tianjin Polytechnic University,Tianjin 300160,China; 2.Motian Membrane Engineering and Technology Company,Tianjin Polytechnic University,Tianjin 300160,China);Rejection of PDMAEMA/PSF hollow fiber composite nanofiltration membrane and.molecule conformation of polyelectrolytes in precoating membrane[A];[C];2005
2 HU Xiaoyu,XIAO Changfa~*,AN Shulin (Key Laboratory of Hollow Fiber Membrane Materials and Membrane Process,Ministry of Education, School of Material Science and Chemical Engineering,Tianjin Polytechnic University,Tianjin 300160,China);Study on the structure and properties of polyvinylidene difluoride/polyurethane co-blend membrane[A];[C];2006
3 LIU Zhen,ZHOU Jin,LI Huijun (Key laboratory of Hollow Fiber Membrane Material and Membrane Process of Ministry of Education, Tianjin Polytechnic University,Tianjin 300160,China);Research on hydrophilic modification of polyethylene hollow fiber membrane[A];[C];2007
4 ZHANG Chunfang,XU Youyi,ZHU Baoku (Department of Polymer Science and Engineering,Zhejiang University,Hangzhou 310027,China);Study on Isothermal crystallization of ultra-high molecular weight polyethylene in liquid paraffin[A];[C];2007
5 DONG Xueliang1,SUN Ximeng2,LIU Xiaopei1,LI Zhongxian1,XU Dan1,YU Xuejun1(1 High & New Technology Research Center of Henan Academy of Sciences,Zhengzhou 450002,Henan,China;2 Chemistry Department,Zhengzhou University,Zhengzhou 450052,Henan,China);Synthesis and application of a high-efficiency reactive decolorizing flocculant[A];[C];2011
6 XiaMin,LuoYunjun,Li Xiaomeng,Lai Zhenfeng (School of material science and engineering,Beijing institute of technology Beijing 100081);The Mechanism's Analysis of Improving Mechanical Properties in Epoxy-Terminated Hyperbranched Polymers Modified Epoxy Resins Systems[A];[C];2008
7 LIU Rui-yun Zhang jia gang KUDOS chemical CO.,Ltd,zhangjiagang,215613,china;synthesis and application of the Silicone modified polyester fiber hydrophilic Agent[A];[C];2009
8 LIU Xiao-ling,SU Yu-qin (School of Material Science and Engineering,Beijing University of Aeronautics and Astronautics, 100191,China);The application of PID temperature control system in the experiment of polymer creep deformation[A];[C];2009
9 Cheng Dongcai Huang Zhixiong (Wuhan University of Technology);MECHANISM AND DEVELEPMENT OF IPN FOR POLYMER DAMPING MATERIALS[A];[C];2003
10 ;BC/HA热性能和孔隙结构分析[A];[C];2008
【Secondary Citations】
Chinese Journal Full-text Database 8 Hits
1 Zhou Zufu; Wang Wei; Huang Zhixiong (Wuhan University of Technology);AN ADVANCED COMPOSITE MATERIAL RESIN MATRIX -THE DEVELOPMENT STATUS AND TENDENCY OF BMI[J];FIBER REINFORCED PLASTICS/COMPOSITES;1995-05
2 WANG Xiaojie LIANG Guozheng School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072 ZHANG Wei HUI Xuemei Xi'an Aerospace Composites Research Institute,Xi'an 710025;Applications of Cyanate Ester Resin to Aircraft and Aerospace[J];Materials Review;2005-05
3 JIANG Li xiang,HE Shi yu,YANG Shi qin (Space Materials and Environment Engineering Lab, Harbin Institute of Technology, Harbin 150006,China) CHEN Ping,SHENG Lei (508 Institute Chinese Academy of Space Technology, Beijing 100076,China);Application of Carbon(grphite) Fiber/Epoxy Composites in the Spacecraft and the Research on Their Behaviors[J];Journal of Materials Engineering;2001-09
4 CHEN Xiang-bao (Beijing Institute of Aeronautical Materials, Beijing 100095, China);The key of applications of advanced polymer matrix composites[J];Hi-tech Fiber & Application;2002-06
5 ZHAO Jia-xiang(Aerospace Research Institute of Materials and Processing Technology,Beijing 100076 China);Civil Aviation and Advanced Composite Materials[J];Hi-Tech Fiber & Application;2007-02
6 TAN Bi en, YI Xiao su(National Key Laboratory of Advanced Composites, Institute of Aeronautical Materials, Beijing 100095, China);High-temperature polyimide composites and its application in aeronautical engine[J];Journal of Aeronautical Materials;2001-01
7 ;Technology Situation and Development Trends of Advanced Resin Matrix Composites[J];Aeronautical Manufacturing Technology;2001-03
8 WANG Ru-min,LAN Li-wen (Department of Chemical Engineering,Northwestern Polytechnical University,Xi'an 710072,China);DEVELOPMENT OF THERMOSETTING RESIN MATRIX USED FOR ADVANCED COMPOSITE MATERIALS[J];Thermoseting Resin;2001-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved