Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《CHINA PLASTICS INDUSTRY》 1998-01
Add to Favorite Get Latest Update

Study of Filling of PP with Attapulgus Clay

Qian Yunhua Jin Yeling (Huai Yin Industrial College) Chen Zhenguo (Huai Yin Dazhong Plastics Factory)  
The mechanical and thermal properties of PP filled with attapulgus clay,which was treated with silane coupling agent,were studied.The results showed when the attapulgus clay content was within the range of 10 parts by mass (taking PP as 100 parts), the tensile strength and notched impact strength of the filled PP increased a little,and decreased when the clay content was more than 10 parts, while the bending strength and thermal deformation temperature increased with the increase of the clay content.When the clay content was 50 parts,the bending strength increased from 49.33MPa to 55.09 MPa,thermal deformation temperature increased from 69℃ to 89℃. When the filling agent content was the same, the overall properties of PP filled with the clay,such as tensile strength,elongation at break,notched impact strength and thermal deformation temperature,were better than those of PP filled with CaCO 3,and the bending strength of PP filled with clay increased with the increase of clay content,while that of PP filled with CaCO 3 decreased with the increase of CaCO 3 content.
【CateGory Index】: TQ325
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 Wang Pinghua, Xu Guoyong, Song Gongpin (School of Chemical Engineering, Hefei University of Technology, Hefei 230009, China);PREPARATION AND PROPERTY RESEARCH OF PP/ATTAPULGITE NANOCOMPOSITES[J];Engineering Plastics Application;2003-12
2 WANG Ping-hua, XU Guo-yong (Department of Polymer Science and Engineering, School of Chemical Engineering, Hefei University of Technology 230009, China);PREPARATION, CHARACTERIZATION AND PROPERTIES OF POLYPROPYLENE/ATTAPULGITE NANOCOMPOSITES[J];Polymeric Materials Science & Engineering;2005-02
3 WANG Ping-hua, XU Guo-Yong (Department of Polymer Science and Engineering, School of Chemical Engineering, Hefei University of Technology, Hefei 230009, China);PREPARATION OF LDPE/ATTAPULGITE NANOCOMPOSITES BY IN-SITU POLYMERIZATION[J];Polymeric Materials Science & Engineering;2005-03
4 Qian Baitai et al;Progress of Surface Modification of Non-Metallic Mineral Powder[J];CHINA NON-METALLIC MINING INDUSTRY HERALD;1999-03
5 WANG Ping hua, XU Guo yong (Dept of Polymer Sci and Eng , School of Chemical Eng , Hefei University of Technology, Hefei 230009, China);Study of Mechanical Properties of Polypropylene/Attapulgite Nano-composites[J];China Plastics Industry;2003-06
6 Xu Guoyong Wang Pinghua (Department of Polymer Science and Engineering, College of Chemical Technology, Hefei University of Technology);ADVANCE IN POLYMER MATERIALS WITH ATTAPULGITE[J];Modern Plastics Processing and Applications;2003-04
7 Hu Tao Qian Yunhua Jin Yeling Mei Li(Bioengineering and Chemical Engineering Department,Huaiyin Institute of Technology·Jiangsu Huaian 223001);STUDY ON THE APPLICATION OF ATTAPULGITE CLAY[J];China Mining Magazine;2005-10
8 ZHANG Qi wei 1, ZHANG Yong hua 2, ZHOU Wen fu 1, HOU Quan fu 2, XIONG Hong bing 2, CHEN Shou ming 2,GONG Ke cheng 2 (1.Department of Chemical Engineering,Sanming Polytechnic College,Sanming 365004,China; 2.Department of Polymer Science,S;Studies on the Preparation and Properties of Rigid Poly(vinyl cholride) Filled by Surface Grafting Polymerized-Attapulgite[J];China Plastics;2002-09
9 WANG Ping hua, XU Guo yong (Department of Polymer Science and Engineering,School of Chemical Engineering, Hefei University of Technology, Hefei 230009, China);Preparation Characterization and Properties of PE-LD/Attapulgite Nanocomposites[J];China Plastics;2004-03
10 DING Xue-jia WANG Yi-min YU Ding-sheng LI Xin-Zhong WANG Bi (The key Laboratory of Preparation and Processing of Novel Polymer of Beijing City,Beijing University of Chemical Technology,Beijing 100029,China);Study on Preparation and Properties of Polyamide 6/Attapulgite Nano-composite[J];China Plastics;2006-09
【Citations】
Chinese Journal Full-text Database 2 Hits
1 ;SURFACE ORGANIC MODIFICATION OF ATTAPULGITE AND ITS APPLICATION IN RUBBER[J];Chemical Engineer;1996-02
2 ;APPLICATION OF ATTAPULGTTE STUFFING IN MAKING TYRE SPACER[J];CHEMICAL ENGINEER;1997-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Wang Yiqing Zhang Liqun Zhang Huifeng Wang Yizhong Cheng Zhiguo Xu Hechang (College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing, 100029);Study on the structure and property of attapulgite/rubber nanocomposites[J];JOURNAL OF BEIJING UNIVERSITY OF CHEMICAL TECHNOLOGY;1999-03
2 QIAN Yun-hua1, JIN Ye-ling1,2, CHEN Jing1, HU Tao1, TAN Li-qiang1 (1.Chemical Engineering Department, Huaiyin Institute of Technology, Huai’an 223003, Jiangsu, China;2.National Special Super-fine Powder Engineering Research Center, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China);A study on the retention of modified attapulgite clay in paper[J];China Pulp & Paper Industry;2007-12
3 Sun ChuanJin1 Ding YongHong1 Yao Chao1 Li XiaoTang2 Liu JianPing3(1 Department of Material Engineering,Jiangsu Polytechnic University,Changzhou 213164;2 Jiangsu Engineering Technology Research Center of Attapulgite,Xuyi 211700;3 Jiangsu NDZ Technology Co.,Ltd.,Changzhou 213016);Study on Preparation of Organic Attapulgite/SBR Composite and Its Properties[J];Non-Metallic Mines;2008-02
4 KANG Wentao,ZHAN Dequan,SHEN Ningxiang(School of Material Science and Engineering, Tianjin University, Tianjin 300072, China);Development of epoxy/inorganic nano-material composites[J];China Adhesives;2003-03
5 Tian Ming,Cheng Lijun,Liang Wenli,Zhang Liqun (Key Laboratory of Beijing City on Preparation and Processing of Novel Polymer Materials, Beijing University of Chemical Technology, Beijing 100029,China);Surface modification of fibrillar silicate and properties of its rubber composites[J];Synthtrc Rubber Industry;2005-01
6 Qian Yunhua and Jin Yeting ;Chen Zhenguo(Huaiyin Industrial Chllege) (Huaiyin Popular Plastics Factory);Attapulgite Filled Rigid PVC Plastics[J];PLASTICS;1998-02
7 Qian Yuhua Jing Yeling (Huaiyin Industry College )Chen Zhengguo (Huaiyin Popular Plastic Factory);STUDY ON PVC FILLED WITH ATTAPULGITE[J];Modern Plastics Processing and Applications;1998-02
8 Xu Guoyong Wang Pinghua (Department of Polymer Science and Engineering, College of Chemical Technology, Hefei University of Technology);ADVANCE IN POLYMER MATERIALS WITH ATTAPULGITE[J];Modern Plastics Processing and Applications;2003-04
9 TANG Qing-guo,SHEN Shang-yue,HU Shan (China University of Geoscience,Wuhan 430074,China);Purification and modification of palygorskite and its application in NBR[J];China Rubber Industry;2004-08
10 CHENG Li-jun,TIAN Ming,ZHANG Li-qun(Beijing University of Chemical Technology,Beijing 100029,China);Properties of fibrillar silicate/SBR composites[J];China Rubber Industry;2005-10
China Proceedings of conference Full-text Database 2 Hits
1 Ming Tian, Wenli Liang, Liqun Zhang* The Key Laboratory of Beijing City on Preparation and Processing of Novel Polymer Materials, Beijing University of Chemical Technology, Beijing 100029;Surface modification of fibrillar silicate(FS) in rubber and the properties of FS/rubber composites[A];[C];2003
2 Ni Shimin Li Qingshan Wu Hongjiang Ma Yukun (Institute of Material Donghua University Shanghai 200051; Department of Material Science and Engineering, Yanshan University, Hebei, Qinhuangdao 066004 );Research on P(AN-VAc)/ClayNanocomposites[A];[C];2004
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Yan Rongjiang Chen Yu Yang Bingxin Ma Guifen (Changchun Institute of Applied Chemistry,Academia Sinica);★★★1 Deanin R D.Chu C W. J. Elast. Plast. ,1986,18(1):42★★★2 Hull D E.Elastomerics,1990,122(1):18★★★3 Plaat. Tech. ,1993,39(8):595★★★4 刘寿华,李长德.国外塑料,1990,8(4):50★★★5 郑光鼎.塑料,1990,19(5):35★★★6 冯继云,李松,张增民.中国[J];Engineering Plastics Application;1995-03
2 Liu Chunxiao (Yueyang General Petrochemical Works 414014);THE STRUCTURE AND MECHANICAL PROPERTIES OF POLYAMIDE 6 TOUGHENED WITH NONELASTOMER[J];Engineering Plastics Application;1996-01
3 Qiu Guixue Xu Shuzhen(Shanghai Jiaotong University 200030) (Qingdao Institute of Chemical Technology 266042);HDPE FOAMS FILLED WITH CaCO_3[J];Engineering Plastics Application;1997-05
4 Xie Xiaolin,Li Bogeng,Shentu Baoqing,Chen Yuan,Pan Zuren (Zhejiang University,Hangzhou 310027);MORPHOLOGY AND RHEOLOGICAL BEHAVIOUR OF PA6 PP BLENDS COMPATILIZED BY R-SMA[J];Engineering Plastics Application;1997-05
5 Li Xianhui, Chen Zhengnan, Chen Ruizhu (College of Material Science and Engineering, Nanjing University of Technology, Nanjing 210009, China);ADVANCE IN THE RESEARCH OF BLENDING POLYCARBONATE WITH POLYESTER[J];Engineering Plastics Application;2003-02
6 Wang Pinghua, Xu Guoyong, Song Gongpin (School of Chemical Engineering, Hefei University of Technology, Hefei 230009, China);PREPARATION AND PROPERTY RESEARCH OF PP/ATTAPULGITE NANOCOMPOSITES[J];Engineering Plastics Application;2003-12
7 Zhu Yafeng, Li Jizhu (Department of Industrial Control, South China University of Technology, Guangzhou 510640, China);EFFECT OF E/VAC ON THE PROPERTIES OF PC/PBT BLENDS[J];Engineering Plastics Application;2005-03
8 Chen Tianhu(Department of Resources and Environment Sciences,Hefei University of Technology,Hefei 230009,China);STUDY ON RESTRICTION FACTORS OF ADSORPTIVITY OF PALYGORSKITE[J];GEOLOGY OF ANHUI;1999-03
9 LI Zeng-xin,WANG Guo-ming,WANG Tong,MENG Yun(Department of Chemistry,Teachers College,Qingdao University,Qingdao 266071,Shandong,China);Adsorption of chromium(Ⅵ) in the sewage with attapulgite-chitosan adsorbent[J];Journal of Safety and Environment;2008-03
10 Wang Rui ;Zang Yi; Wan Hongshan(Department of Fiber Material Engineering,Beijing Institute of Clothing Technology,Beijing 100029);Preparation of PVF Cellular Plastics[J];JOURNAL OF BEIJING INSTITUTE OF CLOTHING;1997-01
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 Dai Fang, Liu Hongchao, Tan Guichun, Sun Anyuan ( The Magazine House of EPA. Jinan 250031 , China);ADVANCE IN THE ENGINEERING THERMOPLASTICS OF CHINA IN 2003[J];Engineering Plastics Application;2004-04
2 HE Jiang-chuan, MA Liu-qiang (Biochamical Engineering College of Beijing Union University, Beijing100023,China);Property of Graphite/Acrylic Resin Coating[J];Journal of Beijing Union University;2005-01
3 ZHANG Qiong-fang,ZHANG Jiao-qiang,GUO Ji-ying ( Northwestern Polytechnic University,Xian 710072,China );NEW PROGRESS IN PVC TOUGHENING WITH NANOPARTICLES[J];Fiber Reinforced Plastics/Composite;2005-01
4 FU Fen-qi~1,SHI Zong-li~(1,2)(1.Institute of Materials Science and Engineering,Lanzhou Jiaotong University,Lanzhou 730070,China;2.Institute of Composite Material,School of Materials,Hunan University,Changsha 410082,China);Recent Advances of Polymer Attapulgite Nanocomposite[J];Surface Technology;2006-05
5 LIU Qing-hua,LI Ya-dong(Academy of Material Engin,Suzhou University,Suzhou 215021,China);Study of thermal properties of epoxy composite filled with ultra-fine AlN[J];Journal of Transducer Technology;2005-11
6 LI Zhong-an1,YU Rui-ting2(1.Pingdingshan Shenma Engineering Plastics Co.Ltd,,Pingdingshan 467000 China;2.Pingdingshan Industrial College,Pingdingshan 467000,China);Study on preparation,representation and properties of attapulgite clay loads TiO_2 catalysis[J];Journal of Pingdingshan Institute of Technology;2008-05
7 OU Baoli1,2,LI Duxin1(1 State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083;2 College of Chemistry and Chemical Engineering,Hunan University of Science and Technology,Xiangtan 411201);Latest Research Development of Polypropylene/Inorganic Nanocomposites[J];Materials Review;2008-03
8 QIAN Yun-hua1, JIN Ye-ling1,2, CHEN Jing1, HU Tao1, TAN Li-qiang1 (1.Chemical Engineering Department, Huaiyin Institute of Technology, Huai’an 223003, Jiangsu, China;2.National Special Super-fine Powder Engineering Research Center, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China);A study on the retention of modified attapulgite clay in paper[J];China Pulp & Paper Industry;2007-12
9 Qian Yunhua Jin Yeling Chen Jing Hu Tao Ding Peixing (Chemical Engineering Department, Huaiyin Institute of Technology, Huaian, Jiansu 223003);Study on Preparing Superfi ne Powder & Surface Modifi cation of Attapulgite & Its Application[J];Non-Metallic Mines;2007-03
10 Xiong Yu Liu Yue Zheng Shuilin Wang Xinhua(School of Chemical and Environmental Engineering,China University of Mining&Technology,Beijing 100083);Research on Purification Technology of Attapulgite Clay[J];Non-Metallic Mines;2009-02
China Proceedings of conference Full-text Database 1 Hits
1 Xu Houcai Zhang Wengong Luo Xiufang (Institute of polymer science,college of chemistry and materials,fujian normal university,Fuzhou 350007);Study on the Viscosity Behaviours of Modified Light Calcium Carbonate with two Difference Modifying Mechanism in Oleophilic Medium[A];[C];2005
【Secondary Citations】
Chinese Journal Full-text Database 4 Hits
1 ;STUDIES ON DECOLORIZATION OF VEGETABIE OIL WFTH ATTAPULGITE[J];Chemical Engineer;1993-06
2 ;ADSORPTION REFINING OF MINERAL OIL WITH ATTAPULGITE[J];Chemical Engineer;1994-02
3 Shen, Zhong Shao, Chang-Sheng Chen, Li-Te Zhao, Cui-Yun Sun, Zai-Jian (Department of Organic Chemical Engineering, Jiangsu Institute of Chemical Technology, Changzhou, 213016);Studies on the Physical Structure and Surface Properties of Esterified Silica Gels[J];Acta Chimica Sinica;1991-05
4 Shen Zhong; Shao Changsheng; Zhu Guojin(Jiangsu Institute of Petrochemical Technology)Xu Xinguo(Changzhou Vocational University of Light Industry);Adsorption and Surface Organic Modificationof White Carbon Black[J];JOURNAL OF JIANGSU INSTITUTE OF PETROCHEMICAL TECHNOLOGY;1995-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved