Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Plasticity Engineering》 2003-01
Add to Favorite Get Latest Update

The application of inverse approach in the initial design for sheet metal forming

XU Guo\|yan SHI Fa\|zhong (School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100083)  
Based on minimum work path and virtual work theory, nonlinear finite element equations of inverse approach were built to estimate sheet metal forming initially The developed finite element program can obtain blank shape and thickness variation rapidly The result agrees well with the result obtained by FastBlank
【CateGory Index】: TG386.3
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 3 Hits
1 WANG Yu-hao,SHI Fa-zhong (School of Mechanical Engineering & Automation ,Beihang University, Beijing 100083,China );Research on initial solution estimation in finite element inverse approach for sheet metal forming[J];Forging & Stamping Technology;2005-04
2 DONG Hongbo,WANG Gaochao(School of Materials Science and Engineering,Nanchang Hangkong University,Nanchang 330063,China);FE Analysis of Stamping Formability of Cushion Pan[J];Hot Working Technology;2009-13
3 Song Yuquan Song Jiawang Ma Pinkui Wang Minghui Jilin University, Changchun,130025;Research on Area Measurement in Sheet Metal Forming[J];China Mechanical Engineering;2006-S1
【Citations】
Chinese Journal Full-text Database 2 Hits
1 LAN Jian\ DONG Xiang\|huai\ LI Zhi\|gang (State key Lab of plastic forming simulation and die & mould tech ,Huazhong university of science and technology,430074);BLANK AND STRAIN ESTIMATES FOR SHEET METAL FORMING PROCESSES BY AN INVERSE APPROACH OF FE[J];Journal of Plasticity Engineering;2001-02
2 Xu Guoyan(Beijing University of Aeronautics and Astronautics,Beijing,China) Shi Fazhong;Blank Calculation for Sheet Metal Forming of a Square Cup[J];China Mechanical Engineering;2003-09
【Co-citations】
Chinese Journal Full-text Database 7 Hits
1 MU Ruifang, WU Jianjun(School of Electromechanics,Northwestern Polytechnical University, Xi'an 710072,Shanxi,China);Blank Shape Optimization for Sheet Metal Forming by Muti-Step Inverse Analysis Methods[J];China Metalforming Equipment & Manufacturing Technology;2004-06
2 Wang Yilin,Zheng Jinqiao,Li Zhigang(State Key Laboratory of Die & Mold Technology,Huazhong University of Science & Technology,Wuhan 430074);Research on an Evaluating Model of Stamping Process Plans for Automobiles′ Panels[J];Mechanical Science and Technology;2006-02
3 GAO Tao, LIU Yu-li, YANG He, WANG Peng (Northwestern Polytechnical University, Xi′an 710072);State of the Art and Trend of Backward Simulation in Metal Forming Process[J];Mechanical Science and Technology;2004-10
4 GONG Ke-jia(Department of Automobile Engineering,Tsinhua University,Beijing 100084 China)HU Ping WEN Yun ZHONG Yan LIU Yong-cai(Institute of Automobile Body and Die Engineering,Jilin University,Changchun 130022 China);The extension method based on the boundary of blank mesh for product part[J];Journal of Plasticity Engineering;2006-05
5 TANG Bing-tao ZHAO Zhen CHEN Jun RUAN Xue-yu (Dept. of Plasticity Forming Eng., Shanghai Jiaotong Univ., Shanghai 200030);The study of blank optimization methods for stamping parts[J];Journal of Plasticity Engineering;2004-06
6 Xie Lansheng Yang Chen Tong Guoquan Gao Lin Nanjing University of Aeronautics and Astranautics,Nanjing,210016;Blank Design for Sheet Metal Forming Parts by a Finite Element Inverse Approach[J];China Mechanical Engineering;2004-09
7 Wu Jianjun Li Shunping Northwestern Polytechnic University,Xi'an,710072;Study on Two Blank Design Methods for Deep Drawing Part[J];China Mechanical Engineering;2004-13
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Li-yan PAN Xiao-lin AN Lu-ling(Research Center of CAD/CAM Engineering, Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China);A Smooth Hole Filling Algorithm for Triangle Mesh Surfaces[J];Journal of Engineering Graphics;2002-04
2 Beijing University of Aero.& Astro Zhang Xiaojing\ Zhou Xianbin\ Kong Yongming;Numerical simulation research on sheet metal forming[J];Forging & Stamping Technology;2001-01
3 Wu Jianjun Chen Weibing Li Shunping (Northwestern Polytechnical University);Influence of material models on the “one-step” simulation results in the forming process[J];Forging & Stamping Technology;2004-03
4 ZHAO Xia,LI Fei(Vocational and Technical College,Liaoning University of Petroleum & Chemical Technology,Fushun 113001,China);Numerical simulation in the drawing of engine hood exterior panel[J];Forging & Stamping Technology;2007-05
5 LEI Zheng bao 1, ZHONG Zhi hua 2 (1.Changsha Comm. Univ., Changsha 410076, China; 2.Hunan Univ., Changsha 410082, China);Developing trends on impact simulation for passenger car[J];JOURNAL OF CHANGSHA COMMUNICATIONS UNIVERSITY;1999-01
6 Hu Ping Liu Haipeng Liu Yuqi (Institute of Automobile Panel Forming Technique, Jilin University, Changchun, 130025);NUMERICAL STUDY OF FLANGING AND SPRING-BACK OF STAMPED THICK METAL PLATE[J];Acta Mechanica Solida Sinica;2002-01
7 CAO Ying, LI Feng, LI Da-yong, HU Ping ( College of Sciences, Jilin University of Technology, Changchun 130025,China; Institute of Automobile Panel Forming Technology, Jilin University of Technoligy,Changchun130025);DETERMINATION OF TRIMMING LINE FOR STRETCH/SHRINK FLANGING[J];Engineering Mechanics;2001-02
8 WANG Yu-hao,SHI Fa-zhong (School of Mechanical Engineering & Automation ,Beihang University, Beijing 100083,China );Research on initial solution estimation in finite element inverse approach for sheet metal forming[J];Forging & Stamping Technology;2005-04
9 Liu Yuqi; Hu Ping; Liu Junhua; Chen Suhuan(Department of Applied Mechanics, Jilin University of Technology, Changchun, 130025);DEFORMATION LOCALIZATION OF SHEET METAL STAMPING FORMING AND DYNAMIC BOUNDARY FRICTION CONSTRAINT[J];ACTA MECHANICA SOLIDA SINICA;1997-03
10 NA Jing-xin~1,GAO Hua~2,ZHANG Li~2,HU Ping~3 (1. State Key Laboratory of Automobile Dynamic Simulation, Jilin University, Changchun 130022,China;2.College of Automotive Engineering, Jilin University, Changchun 130022,China; 3.Institute of Auto-body and Die Engineering,Jilin University,Changchun 130022,China);Selection Algorithm of Relaxation Factor in One Step Forming Simulation Approach[J];Journal of Jilin University of Technology(Natural Science Edition);2005-03
【Secondary References】
Chinese Journal Full-text Database 3 Hits
1 Fan Wei-fu1,QIAO Guo-qian2,LI Gang-sheng2(1.School of Electric and Information,Zhongyuan Institute of Technology,Zhengzhou 450007,China;2.School of Mechanical and Electronic,Zhongyuan Institute of Technology,Zhengzhou 450007,China);Study on FEM simulation arithmetic of metal plasticity[J];Forging & Stamping Technology;2007-03
2 Zhang Xiangkui~* Bao Yidong~* Hu Ping~(+,2)) Hu Sibo~* Lang Zhikui~* Wang Yu~* ~*(Institute of Auto-body & Die Engineering, State Key Lab of Automobile Dynamic Simulation,Jilin University,Changchun 130025,China) ~+(State Key Lab of Structural Analysis for Industrial Equipment,School of Automotive Engineering,Dalian University of Technology,Dalian 116024,China);3D FLANGING AND BLANK SHAPE PREDICTION FOR SHEET METAL BASED ON ONE-STEP INVERSE FEM[J];Chinese Journal of Theoretical and Applied Mechanics;2007-04
3 Song Yuquan Song Jiawang Ma Pinkui Wang Minghui Jilin University, Changchun,130025;Research on Area Measurement in Sheet Metal Forming[J];China Mechanical Engineering;2006-S1
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 Lan Jian Dong Xianghuai Li Zhigang Doctoral Candidate; State Key Lab. of Plastic forming Sinulation and Die and Mould, HUST, Wuhan 430074, China.;Ideal Forming and Design of Sheet Metal Forming[J];Journal of Huazhong University of Science and Technology;2001-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved