Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Plasticity Engineering》 2004-01
Add to Favorite Get Latest Update

Investigation for critical side-wall wrinkle BHF of the hemisphere-shaped workpiece in the process of stamping

TAO You-rui 1,2 ZHANG Fu-quan1 HUANG Chang-qing1 (1.School of Material Science and Engineering ,Hunan University, Hunan 410082) (2.Department of Mechanical Engineering ,Hunan Institute of Engineering, Hunan 411104)  
On the basis of the energy method in the shell theory,a critical side-wall wrinkle BHF(blank holding force) model of the hemispherical workpieces in the stamping process was established (be formula(12)), where Q the BHF,μ the friction coefficient,r 1 the radius of die, t the thickness of blank,σ s the yield strength and f the factor ,which was determined by the punch travel. The theoretical BHF curve of critical side-wall wrinkle was also provided in the paper and was in good agreement with the experimental results, demonstrating that this model could offer the necessary theoretical basis for engineering practices.
【CateGory Index】: TG386
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 3 Hits
1 TAO You-rui~(1,2) WU An-ru~1 HE Ai-gui~1 1.Department of Mechanical Engineering,Hunan Institute of Engineering,Xiangtan 411104,China; 2.State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body,Hunan University 410082,China;A method of regulating blank holder force on single-acting hydraulic press[J];Forging & Stamping Technology;2007-06
2 LIU Jian-hua1,WANG Zhi-heng2 (1.School of Construction Machinery,Chang'an University,Xi'an 710064,China;2.School of Material Science and Engineering,Inner Mongolia University of Technology,Hohehot 010051,China);Influence of plane drawing process parameters on internal wrinkle and experimental study[J];Forging & Stamping Technology;2008-02
3 LUO Zhi-gao,FAN Bin-bin,GUO Xiao-dong,MA Chao(School of Mechanical Engineering,Jiangsu University,Zhenjiang,Jiangsu 212013,China);Parameter optimization of stamping process for bucket based on orthogonal experiment[J];Die & Mould Industry;2008-11
【Citations】
Chinese Journal Full-text Database 4 Hits
1 Nie Shaomin; Jin Miao(The college of Mechanical Engineering, Yanshan University, Qinhuangdao 066004)Wang Dongjie(Patent Bureau of China,Beijing 100083);Investigation for Critical Side-Wall Wrinkle Drawing Fovce of the Sphere-Shaped Workpiece[J];JOURNAL OF YANSHAN UNIVERSITY;2000-04
2 Lei Junxiang;Wrinkling Control in the Process of Drawing[J];HOT WORKING TECHNOLOGY;1996-01
3 Li Chunfeng;Yang Yuying (Harbin Institute of Technology 150001)Li Shuoben (Yanshan University 066004);ANALYSIS OF INSTABILITY POINTS OF HEMISPHERICAL PARTS IN SHEET METAL FORMING[J];JOURNAL OF PLASTICITY ENGINEERING;1995-01
4 Lei Junxiang(Yantai University264005);THE STRESS AND STRAIN CALCULATION OF THE HANGING INCLINEWALL CONE DEFORMATION ZONE ON TAPERED SHELL DEEPDRAWING[J];JOURNAL OF PLASTICITY ENGINEERING;1999-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Yin Jiyig(Department of Engineering);The Force for The Plastic Deformation of One End of Round Bar Between the Dies with Dip Angle[J];Journal of North China University of Technology;1988-02
2 Wu Ying (Beijing Institute of Technology) Zhu Mingwu (Nanjing University of Science & Technology);CALCULATION OF THE STATIC AND DYNAMIC CHARACTERISTICS OF PRESSURE-MEASURING CYLINDERS[J];Acta Armamentarii;1993-04
3 FAN Bailing, YAN Guoan, GUAN Kezhi, LIU Lin, HUANG Yongjian (Mechanical Engineering School,UST Beijing, Binjing 100083,China) (Shijiazhuang Iron and Steel Co.Ltd, Shijiazhuang 050031,China) (Techonlogy Developing Co. Ltd, UST Beijing, Beijing 100083, Chin;Flow Stress Mathematical Models of Stainless at Hot Deformation[J];Journal of University of Science and Technology Beijing;2002-03
4 LIU Bo~1,HUANG Xiao-yan~2 (1.Zhenjiang College;2.ZhenJiang University of ship and boat Technology,Zhenjiang 212003,China);Analysis of Special Technology for Rolling Half-shaft Casing[J];Journal of Benxi College of Metallurgy;2003-04
5 ;The Optimum Taper Angle of Intaglio Mould When Two-piece Cans Thinned and Drawn[J];PACKAGING AND FOOD MACHINERY;1998-03
6 PENG Cheng-yun, DENG Ming, LE Jing-gang (Department of Material Engineering, Chongqing Institute of Technology, Chongqing 400050, China);Mechanical Analysis on the Small-hole Punching in Thick Board[J];Journal of Chongqing Institute of Technology Management;2001-05
7 Zhao Jun (Yanshan University);Quantitative Analysis of Drawing Power on a Cup and Its Affecting Factors by Energy Method[J];;1991-03
8 Xing Zhongwen Yang Yuying (Harbin Institute of Technology);Shear Stress and Shear Deformation of the Flange Deformed Area in Box Drawing[J];Materials Science and Technology;1993-01
9 Lu Shiqiang;Shang Baozhong (Nanchang Institute of Aeronautical Technology Nanchang 330034)Luo Zijiang (Northwestern Ploytechnical University Xi'an 710072)Zeng Fanchang;Liu Yu(Aviation Industry Corporation, Bejing 100034) (No.3117 Factory);Effect of Deformation Temperature on Microstructure and Property of MP159 Alloy[J];MATERIAL SCIENCE AND TECHNOLOGY;1998-01
10 LI Jin-ping~1, LI Yao~1, MENG Song-he~1, LUO Shou-jing~2, JI Song~3, CHEN Zi-ming~3 (1.Institute of Composite Materials & Structure, Harbin Institute of Technology, Harbin150001, China;2.School of Material Science & Engineering, Harbin Institute of Technology, Harbin150001, China; 3.Ningbo Branch of No.52 Institute of China Ordnance Industries, Ningbo 315041,China);Energy and deformation during explosive compaction of CuCr alloys[J];Material Science and Technology;2004-02
China Proceedings of conference Full-text Database 3 Hits
1 Mi Guangbao, Xue Kemin, Thang Zaoming, Zhou Mingzhi (School of Materials Science and Engineering, HeFei University of Technology, hefei 230009);THE STUDY AND APPLICATION TO CHANGETHE THE PROPERTY OF MATERIAL OF TWIST-COMPRESSION[A];[C];2005
2 Wei Ding, Mi Guangbao, Xue Kemin, Zhou Mingzhi (School of Materials Science and Engineering, HeFei University of Technology 230009);The Extrusion Die Design of Cup-bar Component and The Preliminary Analysis with Finite Element Numerical Simulation[A];[C];2005
3 Wang Shuyun Yang Hongtao Li Huiqu (Lab.of Welding and Forging,BIAM,Beijing 100095,China);Isothermal Forging Technology of P/M Superalloy Discs[A];[C];2007
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 WANG Yong-zhi, YANG Yu-ying, JIN Chao-hai (School of Material Science and Engineering, Harbin Institute of Technology, Harbin 150001, China,);Simulated analysis of uneven deformation of flange metal in square cup deep-drawing[J];Material Science and Technology;2004-01
2 ZHAO Jun,MA Rui, GUAN Ying-ping, PAN Wen-wu(Yanshan University Mechanical Engineering College, Qinhuangdao 066004,China,);The law of BHF during intelligent control of conical workpiece deep drawing[J];Material Science and Technology;2004-04
3 Inner Mongolia Polytechnic University Liu Jianhua Ding Guo Wang Zhiheng;Critical calculation and checking condition of causing internal wrinkle[J];FORGING & STAMPING TECHNOLOGY;2000-02
4 Shanghai Jiaotong University Sun Chengzhi Chen Guanlong Li Shuhui;Research on determining optimal variable blankholder forces trajectory in sheet metal forming processes[J];Forging & Stamping Technology;2003-01
5 Shanghai Jiaotong University Luo Yajun Zheng Jingfeng Zhang Yongqing He Dannong;Variable BHF technology in sheet metal deep drawing[J];Forging & Stamping Technology;2003-02
6 GUAN Ying-ping 1 ZHAO Jun 1 GUO Bao-qiang 2(1.Yanshan University; 2.Shenyang Heavy Machinery Group Co.Ltd);Calculation of critical thickness of tube-shaped parts wrinkling in sheet drawing process[J];Forging & Stamping Technology;2004-06
7 YANG Dian-kui(College of Materials Science and Engineering, Inner Mongolia University of Technology);Calculation of critical stress of inner wrinkle by energy method[J];Forging & Stamping Technology;2004-06
8 SUN Cheng-zhi,LUO Si-dong,WANG Dong-chuan,KE Feng,DU Han-bin(Automotive Engineering Academy of Shanghai Automotive Industry Corporation,Shanghai 200437,China);Numerical simulation and experimental measurement method of contact stress distribution between blank-holder and die during sheet metal forming[J];Forging & Stamping Technology;2005-06
9 LI Xi-ning,WANG Zhong-qi,YIN Jun-qing(School of Mechatronical Engineering,Northwestern Polytechnical University,Xi'an Shanxi 710072,China);Rectangular box drawing die design of controlled blank holder force[J];Forging & Stamping Technology;2006-01
10 SUN Xi-yan~ 1,2,3 ,SHI Hu-li~1,JI Yuan-fa~ 1,2,3 ,LIU Jun~2 (1. National Astronomical Observatory, Chinese Academy of Sciences, Beijing 100012, China; 2. Applied Science and Technology College,Guilin University of Electronic Technology, Guilin Guangxi 541004, China; 3. Graduate school, Chinese Academy of Sciences, Beijing 100039, China);Key algorithms comparison of Numerical Simulation of Sheet Metal Drawing Process[J];Forging & Stamping Technology;2006-02
【Secondary References】
Chinese Journal Full-text Database 2 Hits
1 LIU Jian-hua1,WANG Zhi-heng2(1.School of Construction Machinery,Chang'an University,Xi'an 710064,China;2.School of Materials Science and Engineering,Inner Mongolia University of Technology,Hohhot 010051,China);Calculation of critical blank holder force for drawing cone part with semicircular drawbead[J];Forging & Stamping Technology;2009-02
2 FANG Ming-lei,LI Ming-zhe,LIU Hong(College of Mechanical Engineering,Zhejiang University of Technology,Hangzhou 310014,China);Research on impact of parameters to inner-wrinkling in surface drawing[J];Journal of Zhejiang University of Science and Technology;2009-03
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Yantai University Lei Junxiang;LiLi;Wrinkling Forecast for Multioperation Drawing ofCylindrical Shell Without Pressure Ring[J];FORGING & STAMPING TECHNOLOGY;1994-05
2 Yu Ji-lin;Wang Li-lih;Zhu Zhao-xiang, (University of Science and Technology of China);DETERMINATION OF PROPAGATION VELOCITY OF ELASTIC-PLASTIC BOUNDARIES IN A BAR[J];Acta Mechanica Solida Sinica;1984-01
3 Lian Jianshe Zhou Dajun Bernard Baudelet (Jilin University of Technology) (Institute National Polytechnique de Grenoble,France);HILL'S YIELD CRITERION (1979) AND ITS APPLICATION TO PREDICT SHEET METAL FORMING LIMIT DIAGRAM[J];Acta Mechanica Solida Sinica;1991-02
4 Xi Feng Yang Jialing Li Zail iang (Beijing University of Aeronautics and Astronautics, Soli ds Mechanics Research Center, Beij ing, 100083);ANOMALOUS BEHAVIOR REVI SITED: DYNAMIC RESPONSE OF ELASTIC PLASTIC ST RUCTURES[J];ACTA MECHANICA SOLIDA SINICA;1999-02
5 Li Xiangping Zhong Zhenghua Department of Engineering Mechanics;Multiple Buckled State of Orthotropic Plates[J];Journal of Hunan University (Natural Science);1992-03
6 Fan Miaohai Zhouxianbin(Department of Mechanical Engineering ,Hunan Univ ,Cbangsha , 410082);Analysis of Elastoplastic Bucking of Thin Anisotropic Sheet under Diagonal Stretching[J];JOURNAL OF HUNAN UNIVERSITY(NATURNAL SCIENCES);1994-05
7 Huang Zhu-ping Duan Zhu-pingDept. of Mech., Beijing Univ. Institute of Mech., Academia Sinica;ON THE DECOMPOSITION OF STRAIN AND STRAIN RATE IN FINITE ELASTO-PLASTIC THEORY[J];Advances In Mechanics;1990-01
8 Zhang Liang-chi Dept. of Mechanics, Zhejiang UniversityYu Tong-xi Wang Ren Dept. of Mechanics. Beijing University (Peking University;THE PARADOX IN PLASTIC BUCKLING OF PLATES AND SHELLS AND THE RESEARCH PROGRESS[J];Advances In Mechanics;1990-01
9 Wang Ling-yunChongqing University;PLASTIC INSTABILITY IN METAL FORMING PROCESS[J];Advances In Mechanics;1993-03
10 Ren Wang (formerly AJ Wang) (Dept. of Mechanics and Engineering Science, Peking University, Bejing 100871, China; 0461raj@pku.edu.cn);A RETROSPECTIVE ON DYNAMIC PLASTICITY AND DYNAMIC PLASTIC INSTABILITY[J];Advances In Mechanics;2001-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved