Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Plasticity Engineering》 2005-06
Add to Favorite Get Latest Update

Coupled thermo-mechanical FEM analysis of the sintered powder during upsetting process

ZHOU Ming-zhi LI Ping XUE Ke-min (School of Material Science and Engineer,Hefei University of Technology,Hefei 230009 China)  
According to the interaction of thermal and mechanical effects during powder forging process,the coupled thermo-mechanical equations for numerical simulation were studied with the compressible rigid-viscoplastic finite element method。 Free upsetting process was selected to investigate the deformation behavior of the sintered powder metal of Al 6061.Through the numerical simulation,the distributions of strain,density and temperature are investigated under the different working conditions. The adoption of coupled thermo-mechanical technique enables a more accurate description of deformation,and this is very important to properly determine the technology parameter and increase the quality of the products.
【Fund】: 教育部博士学科点专项基金资助项目(040310B2)。
【CateGory Index】: TG316
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 3 Hits
1 GUO Biao1,GE Chang-chun1,2,ZHANG Sui-cai2,ZHANG Yu2(1.School of Materials Science & engineering,Southwest Jiaotong University,Chengdu 610031,China;2.Institute of Special Ceramics and Powder Metallurgy,School of Materials Science& Engineering,University of Science and Technology Beijing,Beijing 100083,China);POWDER FORGING TECHNOLOGY AND ITS APPLICATION PROGRESS[J];Powder Metallurgy Industry;2011-03
2 HUANG Hua-gui1,DU Feng-shan1,2,XU Zhi-qiang1(1.College of Mechanical Engineering,Yanshan University,Qinhuangdao,Hebei 066004,China; 2.Laboratory of Metastable Materials Science & Technology,Yanshan University,Qinhuangdao,Hebei 066004,China);FEM ANALYSES ON COMPACTION OF POROSITY DEFECTS INSIDE HEAVY FORGINGS DURING HOT FORGING PROCESS[J];Engineering Mechanics;2011-09
3 Li Qi Li Ping Xue Kemin Wang Xiaoxi Jia Jianlei Hefei University of Technology,Hefei,230009;Finite Element Method and Experiments on High-pressure Torsion of Cone-shaped Part Prepared by Pure Al Powder Sintered Material[J];China Mechanical Engineering;2010-11
【Citations】
Chinese Journal Full-text Database 2 Hits
1 Ren Xueping (University of Science and Technology, Beijing 100083, China) Wang Erde and Huo Wencan (Harbin Institute of Technology, Harbin 150006,China);THE YIELD CRITERION OF POWDER COMPACT[J];Powder Metallurgy Technology;1992-01
2 LI Ping 1, 2, XUE Ke-min 2, L*B Yan 2, TAN Jian-rong 1 (1. College of Mechanical and Energy Engineering, Zhejiang University, Hangzhou 310027, China; 2. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001,;Numerical simulation of coupled thermo-mechanical behavior of Ti-15-3 alloy during back-extrusion[J];The Chinese Journal of Nonferrous Metals;2002-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Xuefeng Liu;Lingyun Wang;Li Zhang Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China Library, University of Science and Technology Beijing, Beijing 100083, China;Forging process modeling of cone-shaped posts[J];北京科技大学学报(英文版);2004-03
2 Zhao Dong; Huang Wenbin;Lu Zhenyou. Journal of Beijing Forestry University (2000)22(5)65~67 [Ch,5 ref.]College of Forest Products and Engineering, Beijing For.Univ.,100083,P.R.China.;The constitutive equations of corn stalk powder in closed cylinderical die.[J];JOURNAL OF BEIJING FORESTRY UNIVERSITY;2000-05
3 Wang Lingyun 1 ,Yang Wengming 2 ,Huang Guangjie 1 ,Liu Xuefeng 3 (1.Chongqing University,Chongqing400044,China)(2.South West Aluminum(Group)Limited Corporation,Chongqing 401326,China)(3.Sichuan University,Chengdu 610065,China);Coupled Thermo -Mechanical FEM Analysis of Especial Long Forging during Inverted Extrusion[J];Rare Metal Materials and Engineering;2003-05
4 Liu Peisheng (1. The Key Laboratory of Beam Technology and Material Modification of Ministry of Education & Dept. of Materials Science and Engineering, Beijing Normal University, Beijing 100875, China) (2. Beijing Radiation Center, Material Physics Division, Beijing 100875, China);Some Problems on Mechanical Properties of Foamed Metals[J];Rare Metal Materials and Engineering;2004-05
5 CAO Wei1, GUAN Yanjin2, LI Xiugang3, YUAN Yang4 (1.Yantai Automobile Vocational College,Yantai 264000, Shandong China; 2.Shandong University,Jinan 250061,Shandong China; 3.Qingdao Broadcasting & Television bureau, Qingdao 266000, Shandong China; 4.Weifang Baoli Automobile Ltd.,Weifang 261057,Shandong China);Research on Numerical Simulation in Cylinder Upsetting Process Based on Element Free Galerkin Method[J];China Metal Forming Equipment & Manufacturing Technology;2008-03
6 HUA Lin~(1,2),QIN Xun-peng~1 (1.Wuhan University of Technology,Wuhan Hubei 430070,China; 2.State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology);SIMPLIFICATION OF YIELD CRITERION FOR POWDER METALLURY MATERIALS[J];Powder Metallurgy Industry;2004-02
7 He Jun, Kang Yonglin, Ren Xueping (Department of Metal Forming, USTB, Beijing 100083) Xin Ping (TOSHIBA Ceramics Company);FEM Analysis of Density Flaw of Ceramic Powders during Cold Isostatic Pressing[J];Powder Metallurgy Technology;2001-06
8 ZHOU Ming-zhi, XUE Ke-min (School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China);3D elasto-plastic FEM simulation of precise extrusion process of the box-shaped work piece[J];Journal of Hefei University of Technology(Natural Science);2005-08
9 QIN Xun-peng (Wuhan University of Technology,Wuhan,430070,Hubei);The Ways of Evaluation on Plastic Deformation for Compressible Sintering Materials[J];Journal of Huanggang Polytechnic;2009-04
10 Li Ping (Zhejiang University)Xue Kemin Lit Yan Tan Jianrong(Harbin Institute of Technology) (Zhejiang University);SIMULATION OF MICROSTRUCTURE OF Ti-15-3 ALLOY DURING HOT BACK- EXTRUSION[J];Chinese Journal of Mechanical Engineering;2003-01
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 CHEN Bin~ 1,2 , LIN Dongliang~ 1,3 , ZENG Xiaoqin~ 1,2 , LU Chen~ 1,2 (1 State Key Laboratory of Metal Matrix Composite, Shanghai Jiaotong University; 2 Light Alloy Net Forming National Engineering Research Center, Shanghai Jiaotong University; 3 Key Laboratory of the Ministry of Education of High Temperature Materials and Testing, Shanghai Jiaotong University, Shanghai 200030);Present State and Perspectives of Severe Plastic Deformation[J];Materials Review;2006-09
2 DU Yuxuan,ZHANG Xinming(School of Materials Science and Engineering, Central South University, Changsha 410083);Severe Plastic Deformation Methods for Ultra-fine Grained Materials[J];Materials Review;2006-S2
3 Xu Shuqin;Fu Yuan;Guo Huiguang(Taiyuan Heavy Machinery Institute);FEM Analysis and Simulated Experimental Research on the Twist-compression Forming of the Cylinder[J];MATERIAL SCIENCE AND TECHNOLOGY;1996-01
4 Guo Ruiping1, Liu Guanting2, Fan Tianyou3 (1. Academy of Equipment Command and Technology, Beijing 101416, China) (2. Inner Mongolia Normal University, Huhhot 010022, China) (3. Beijing Institute of Technology, Beijing 100081, China);Review of Compressible Plasticity Mechanics in Metal Foams[J];Rare Metal Materials and Engineering;2009-S3
5 DU Suigeng FU Li WANG Zhongping(Northwestern Polytechnical University, Xi'an 710072);CONTINUOUS TREATMENT BY FRICTION PRESSURE AND TORSION ON PURE COPPER SURFACE[J];Chinese Journal of Material Research;2002-06
6 SHANGGUAN Fengshou XIE Jijia HONG Youshi~(**) (State Key Laboratory of Nonlinear Mechanics (LNM),Institute of Mechanics,Chinese Academy of Sciences,Beijing 100080);Grain refinement and its correlation with strain for pure copper subjected to high pressure torsion[J];Chinese Journal of Materials Research;2007-01
7 SHENG Zhigang, WANG Huachang, CHEN Yongbo, WU Yanxi ( Wuhan University of Technology, Wuhan 430070, Hubei China );FE Simulation and Analysis of Optimizing Upsetting by Using Contact Friction[J];China Metal Forming Equipment & Manufacturing Technology;2006-02
8 WANG Chong-lin(Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China);Solution of diffusion equations and distribution of alloying elements in sintered materials[J];Materials Science and Engineering of Powder Metallurgy;2006-02
9 Han Huanqing Jiang Wei Zhang Peng Chu Zhengjun (Central Iron & Steel Research Institute,Beijing 100081,China);APPLICATION OF METAL POWDERS TO SHAPED CHARGE LINER[J];Powder Metallurgy Industry;2004-03
10 Li Nianxin(Wunan University of Automobile Industry, Wuhan 430070)Li Senrong(Powder Metallurgy Plant of Wuhan Iron and Steel Corperation,Wuhan 430085);DEVELOPMENT IN IRON-BASED P/M FORGING TECHNOLOGY IN OUR COUNTRY[J];POWDER METALLURGY TECHNOLOGY;1996-01
【Secondary References】
Chinese Journal Full-text Database 6 Hits
1 ZHANG Kai,LI Ping,XUE Ke-min(School of Material Science and Engineering,Hefei University of Technology,Hefei 230009,China);Effects of key parameters on copper powder cones processed by high-pressure torsion[J];Materials Science and Technology;2011-05
2 SHI Wen-chao,LI Ping,LI Xiao,XUE Ke-min(School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);EFFECT OF VOLUME FRACTION ON TENSILE PROPERTIES OF SiCp/Al ALLOY COMPOSITES BY HIGH-PRESSURE TORSION[J];Powder Metallurgy Industry;2013-01
3 DU Feng-shan;LI Jie;FAN Jun-kai;HUANG Hua-gui;LI Yuan;National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University;National Laboratory of Metastable Materials Science & Technology, Yanshan University;;Research on hydrogen pressure field of micropores in heavy forgings[J];Journal of Yanshan University;2013-06
4 ZHANG Kai,ZHANG Bin-bin,ZHANG Qian-qian,et al;Design and improvement of high-pressure torsion forming die for cone-shaped parts[J];Die and Mould Technology;2011-02
5 Zhang Kai Li Ping Xue Kemin Hefei University of Technology,Hefei,230009;Improvement of Pure Copper Powder Cones Warm Processed by High-pressure Torsion[J];China Mechanical Engineering;2011-15
6 XIE Li-chuan,PENG Chao-qun,WANG Ri-chu,WANG Xiao-feng,CAI Zhi-yong,LIU Bing (School of Materials Science and Engineering,Central South University,Changsha 410083,China);Research progress of high aluminum-silicon alloys in electronic packaging[J];The Chinese Journal of Nonferrous Metals;2012-09
【Secondary Citations】
Chinese Journal Full-text Database 5 Hits
1 Ren Xueping (University of Science and Technology, Beijing 100083, China) Wang Erde and Huo Wencan (Harbin Institute of Technology, Harbin 150006,China);THE YIELD CRITERION OF POWDER COMPACT[J];Powder Metallurgy Technology;1992-01
2 Liang Hua (Wuhan Institute of Technology, Wuhan 430070, China);PRESENT STATUS OF POWDER FORGING[J];Powder Metallurgy Technology;1992-02
3 Hong Shenze; Dong Dingfu; Wang Shujun; Cai Keyu(Hefei University of Technology);THERMODYNAMIC COUPLE NUMERICAL SIMULATIONOF THE TEMPERATURE FIELD IN HOTFORGING FORMING PROCESS[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;1996-01
4 Qi Lehua, Hou Junjie, Yang Fang, Li Hejun Department of Mechanics, Northwestern Polytechnical University, Xi'an 710072, P.R.China;Application of artificial neural network in process of direct extrusion during solidification of liquid metal[J];THE CHINESE JOURNAL OF NONFERROUS METALS;1999-03
5 Zhang Xingquan, Peng Yinghong, Ruan Xueyu National Die and Mold CAD Engineering Research Center, Shanghai Jiao Tong University, Shanghai 200030, P. R. China;A constitutive relationship model of Ti 17 alloy based on artificial neural network[J];THE CHINESE JOURNAL OF NONFERROUS METALS;1999-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved