Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Experimental Mechanics》 2006-05
Add to Favorite Get Latest Update

A Study on Mechanical Properties of 5A06 Al-Mg Alloy at Transient Heating

WU Da-fang~1,SONG Hao~2,LI Yong-ting~1,YAN Zhen-qian~1(1.School of Aeronautics Science and Technology,Beijing University of Aeronautics and Astronautics,Beijing 100083,China;2.National Laboratory of Metrology and Calibration of Changcheng Institute of Metrology & Measurement,Beijing 100095,China)  
Using thermal strength experiment to test and determine the pivotal parameters such as ultimate strength and thermal stress at the complicated condition of transient heating is very important for reliability estimation,life prediction of aerospace materials and security design of high-speed flight vehicle.There are no ultimate strength and other important token parameters at high temperature transient heating environment in the intensity design handbook yet.In this paper,the high temperature ultimate strength,loading time and other mechanical properties of 5A06 Al-Mg alloy under different transient heating temperatures and load environments were obtained by using experimental simulation system of the transient aerodynamic heating for high-speed flight vehicle.Reliable basis is provided for studying the loading capacity and weight lightened of aerospace materials and structures under transient heating environment.
【CateGory Index】: V257
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 7 Hits
1 LIN Mu-sen*,PANG Bao-jun,ZHANG Wei,CHI Run-qiang(Hypervelocity Impact Research Center,Harbin Institute of Technology,Harbin 150001,Helongjiang,China);Experimental investigation on a dynamic constitutive relationship of 5A06 Al alloy[J];Explosion and Shock Waves;2009-03
2 Pan Bing Wu Dafang(Institute of Solid Mechanics,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);High-Temperature Digital Image Correlation Method Based on Optical Band-Pass Filtering Imaging[J];Acta Optica Sinica;2011-02
3 Pan Bing,Wu Dafang,Gao Zhentong(School of Aeronautic Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);A Non-contact High-temperature Deformation Measuring System Based on Digital Image Correlation Technique[J];Acta Aeronautica Et Astronautica Sinica;2010-10
4 WANG Yi-yue LIU Xiao-ling FU Yu;The numerical analysis of double-layer shell under the high-speed impact[J];Shanxi Architecture;2010-24
5 Pan Bing Wu Dafang Gao Zhengtong Wang Yuewu(Institute of solid mechanics,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Study of non-contact optical metrology for full-field deformation measurement at 1200℃[J];Structure & Environment Engineering;2011-01
6 LI Chao;AN Zhan-jun;YIN En-huai;China Electronics Technology Group Corporation 20th Institute;;Research on technical parameters of 5A06 aluminum alloy for preventing sheet bending-cracking[J];Light Alloy Fabrication Technology;2015-08
7 GAO Ning;ZHU Zhi-wu;School of Mechanics & Engineering, Southwest Jiaotong University;;Study on the Strain Rate Effects and Mechanisms for Aluminum Alloys[J];Applied Mathematics and Mechanics;2014-S1
【Citations】
Chinese Journal Full-text Database 5 Hits
1 Han Mingbao a,Liu Zongde b,Liu Yiguang a( a .Beijing University,Beijing,100871) ( b .the North Electric Power University of China,Beijing,100085);AN EXPERIMENTAL STUDY ON THE MECHANICAL BEHAVIOR OF A3 STEEL UNDER RAPID HEATING[J];EXPLOSION AND SHOCK WAVES;1999-01
2 WU Da fang,FANG Yuan peng,ZHANG Min (Beijing University of Aeronautics and Astronautics,Beijing,100083);Experimental Simulation System of Transient Aerodynamic Heating for High-speed Flight Vehicle[J];Aviation Metrology & Measurement Technology;2003-01
3 YANG Yunmin, PENG Xianghe (Institute of Civil Engineering, Chongqing University, Chongqing 400044) CHEN Yuze,YIN Yihui, CHEN Gang (Institute of Structure Mechanic,Chinese Engineering Physics Research Academy, Chengdu 610003);EFFECT OF HEATING SPEED ON MECHANICAL PROP- ERTIES OF LY12 ALUMINUM ALLOYS[J];ACTA METALLRUGICA SINICA;2000-09
4 TAN Yun, YU Yong, PAN Xiaoxia, LI Guangdong, ZHANG Fangju, FENG Jie, ZHOU DehuiInstitute of Structural Mechanics, China Academy of Engineering Physics, Mianyang 621900RONG Lijian, MA LumingInstitute of Metal Research, The Chinese Academy of Science, Sheny;EFFECT OF HIGH TEMPERATURE THERMAL SHOCKING ON THE MECHANICAL PROPERTY AND MICROSTRUCTURE OF STAINLESS STEEL J75[J];Acta Metallrugica Sinica;2002-07
5 Wang Guotao Xie Huimin Dai Fulong (Department of Engineering Mechanics, Tsinghua University) Zhang Guangjun Liu Xingfu Zhang Fangju Xu Aimin (Institute of Structural Mechanics, CAEP,Chengdu);Experimental Study on the Dynamic Deformation of LY12 Aluminum Plate Heated by Strong Current with Moire Interferometry[J];JOURNAL OF EXPERIMENTAL MECHANICS;1997-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 SUN Guo - yuan, CHEN Guang, LIU Ping (Joint Laboratory of Nanostructured Materials and Technology, Nanjing University of Science and Technology, Nanjing 210094, P. R. Jangsu China);Research Progress of crystallization behavior of bulk amorphous Mg_(65)Cu_(25)Y_(10) alloy[J];Ordnance Material Science and Engineering;2004-04
2 XIAO Pan,LIU Tian-mo(College of Material Science and Engineering,Chongqing University,Chongqing 400044,China);Study on hot compression deformation simulation of AZ61B magnesium alloy[J];Ordnance Material Science and Engineering;2006-04
3 XIA Cui-qin1, LIU Ping1, TIAN Bao-hong1, REN Feng-zhang1, ZHAO Dong-mei1,DONG Qi-ming2 (1.School of Material Science and Engineering, Henan University of Science and Technology, Luoyang 471039,China; 2.Henan University of Technology, Zhengzhou 450052, China);Study on recrystallization of Mg-Al-Zn-Nd magnesium alloy during hot-compression[J];Ordnance Material Science and Engineering;2007-06
4 WANG Zhendong,CHEN Wei,WANG Youqi,MA Li (Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China);Microstructure and mechanical properties of spray deposited Mg-9Al-4.5Ca alloy[J];Ordnance Material Science and Engineering;2009-02
5 MA Ying1,2,ZHANG Zhongming1,XU Chunjie1,ZHANG Jun1,LV Tao1,WANG Bing1(1.School of Materials Science and Engineering,Xi′an University of Technology,Xi′an 710048,China; 2.Department of Mechanical Engineering,Xi′an Aerotechnical College,Xi′an 710077,China);Microstructure and properties of hot extruded AZ91D magnesium alloy wire[J];Ordnance Material Science and Engineering;2012-01
6 Wu Dafang(School of Aeronautic Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China)Song Hao(National Laboratory Metrology and Calibration of Changcheng Institute of Metrology & Measurement,Beijing 100095,China)Gao Zhentong Yan Zhenqian(School of Aeronautic Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Mechanical properties of 2A12 Al alloy at transient heating[J];Journal of Beijing University of Aeronautics and Astronautics;2007-05
7 Zheng Liming( School of Astronautics,Beijing University of Aeronautics and Astronautics,Beijing 100191,China) Wu Dafang Wang Yuewu Gao Zhentong(School of Aeronautic Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Experiment and numerical simulation on heat-shielding properties of metallic honeycomb panel in high temperature environment[J];Journal of Beijing University of Aeronautics and Astronautics;2012-06
8 HUANG Jinfeng1),LI Yongbing1),LUO Hairong1),CUI Hua2),CAI Yuanhua1),DUAN Xianjin1),ZHANG Jishan1)1)State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China 2)School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;Microstructure and mechanical properties of spray formed AZ31 magnesium alloy[J];Journal of University of Science and Technology Beijing;2008-04
9 ZHANG Xi-yan~1,JIANG Feng~(1,3),ZHAO Min~2,LI Xue-qin~2,ZHOU Shi-jie~1,QI Lin-lin~1 (1.School of Material Science & Engineering, Southwest Jiaotong University, Chengdu 610031, P.R.China; 2.Nonferrous Metal Manufacturing Co., Chengdu Engine (Group) Co., Ltd., Chengdu 610067, P.R.China; 3.P.O. Box 677, Chengdu Aircraft Industrial (Group) Co., Ltd., Chengdu 610092,China);Study on Relations among the Composition, Microstructure and Properties of Mg-Al-Zn Alloys[J];Journal of Chongqing Institute of Technology;2003-06
10 ZHANG Yong\|jun, YAN Chuan\|wei, WANG Fu\|hui, CAO Chu\|nan (State Key Laboratory for Corrosion and Protection, Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110016, China);Application, Corrosion and Protection of Magnesium and Its Alloys[J];Materiais Protection;2002-04
China Proceedings of conference Full-text Database 7 Hits
1 Wei Li1 Fu Zhongliang 2, Li Changkun 3 Wang Xinpeng4 (College of Material Science and Engineering of Chongqing University, Chongqing 400044);The Factors of Effecting the Punching Properties of Megnesium Alloys[A];[C];2009
2 QIN Guo-yi~(1,2) CAI Hong-zhong~3 WANG Jian-hua~4 ZHAO Huai-zhi~3 CHEN Liang-wei~3 1.College of Material and Metallurgy Engineering,Kunming University of Science and Technology,Kunming 650093,China; 2.Research Centre of Advanced Material Engineering,Yunnan University,Kunming 650091,China; 3.Kunming Institute of Precious Metals,Kunming 650106,China; 4.Key Lab.of Advanced Materials of Yunnan Province,Kunming 650093,China;Rapid solidification of Ag-Cu eutectic droplets by ultrasonic arc spray[A];[C];2007
3 Wei Li Fu Zhongliang Li Changkun Wang Xinpeng (College of Material Science and Engineering of Chongqing University, Chongqing 400044);The Factors of Effecting the Punching Properties of Megnesium Alloys[A];[C];2009
4 Wei Li Fu Zhongliang Li Changkun Wang Xinpeng (College of Material Science and Engineering of Chongqing University, Chongqing 400044);The Factors of Effecting the Punching Properties of Megnesium Alloys[A];[C];2009
5 Wei Li Fu Zhongliang Li Changkun Wang Xinpeng(College of Material Science and Engineering of Chongqing University,Chongqing 400044);The Factors of Effecting the Punching Properties of Megnesium Alloys[A];[C];2009
6 REN Fengzhang, LIU Ping, TIAN Baohong, LIU Yong (School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471003);Current Status of Wrought Magnesium Alloy[A];[C];2005
7 Zhao Xin~1 Zhang Kui~1 Li Xing-gang~1 Li Yong-jun~1 He Qing-kui~2 Sun Jian-feng~2 (1.State Key Laboratory for Fabrication and Processing of Non-Ferrous Metals General Research Institute for Non-ferrous Metals,Beijing100088,China; 2.The 518th Institute No.5 Academy of China Aerospace Science & Technology Corporarion,Shanxi,030800,China);The experimental study on recrystallizationo of a Mg-Y-Nd-Gd-Zr alloy[A];[C];2007
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 WANG Shu-jun;ZHANG Bao-zhou Dept. of Astronomy, Beijiug Normal University, Beijing 100875, CHN;On-line Sorting System of LED[J];Semiconductor Optoelectronics;2004-02
2 Zhang Wansheng,Liang Chunguang (The 13th Institute,Ministry of EI,Shijiazhuang,050051);Progress in Visible LED[J];SEMICONDUCTOR INFORMATION;1997-03
3 Wang Lili Bao Hesheng Lu Weixian(Ningbo University, Ningbo 315211);THE INVERSE STRAIN-RATE EFFECT INDUCED BY DAMAGE AND ITS INFLUENCE ON CONSTITUTIVE RELATION AND THERMO-VISCOPLASTIC INSTABILITY[J];Explosion and Shock Waves;1993-01
4 ZHANG Shan-yuan,CHENG Guo-qiang,MA H ong-wei,YANG Gui-tong (Institute of Applied Mechanics,Taiyuan University of Technology,Taiyuan Shanxi 030024,China);Dynamic Plastic Buckling of Cylindrical Shells under Axial Impact[J];EXPLOSION AND SHOCK WAVES;2000-04
5 LIU Li,LIU Tu guang, ZHANG Tao, LI Tian yun (Department of Naval Architecture and Ocean Engineering, Huanzhong University of Science and Technology, Wuhan 430074, Hubei, China);Elastic-plastic Dynamic Buckling of Cylindrical Sheells under Combined Loading[J];Explosion and Shock Waves;2002-02
6 ZHANG Wei,XIAO Xin-ke,WEI Gang(Hyper Velocity Impact Research Center,Harbin Institute of Technology, Harbin 150008,Heilongjiang,China);Constitutive relation and fracture model of 7A04 aluminum alloy[J];Explosion and Shock Waves;2011-01
7 GUO Qiang-sheng(The 45th Institute of CETC, Beijing East Yanjiao, 101601, China);A Study On The Movement Control Technology of Die Picking Mechanism of LED die Bonder[J];Equipment For Electronic Products Manufacturing;2005-06
8 TONG Zhi-yi ( The 45th Research Institute of CETC, Beijing East Yanjiao Development zone 065021, China );Catch the Opportunity to Increase the Ability to Innovate Independently in LED Equipment Manufacture Industry in China[J];Equipment for Electronic Products Manufacturing;2006-11
9 Wang Lili and Hu Shisheng (University of Science and Technology of China);DYNAMIC STRESS-STRAIN RELATIONS OF AL ALLOY LF6R AND AL L4R UNDER HIGH STRAIN RATES[J];Acta Mechanica Solida Sinica;1986-02
10 Pan Bing Xie Huimin(Department of Engineering Mechanics,Tsinghua University,Beijing 100084);Full-Field Strain Measurement Based on Least-Square Fitting of Local Displacement for Digital Image Correlation Method[J];Acta Optica Sinica;2007-11
China Proceedings of conference Full-text Database 1 Hits
1 LIU Hong (Energy Research Institute, National Development and Reform Commission, Beijing 100038);China Green Lights Program——A successful model for China sustainable development[A];[C];2008
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 SUI Guo-fa,LI Jin-shan,MA Bei,WANG Yi-chuan(Northwestern Polytechnical University,State Key Laboratory of Solidification Processing, Xi′an 710072,China);Simulation for the influences of explosive amount on explosive welding of two-layer tubes[J];Materials Science and Technology;2010-06
2 Pan Bing1 Wu Dafang1 Xie Huimin2 Hu Zhenxing2 1Institute of Solid Mechanics,Beijing University of Aeronautics and Astronautics,Beijing 100191,China 2School of Aerospace,Tsinghua University,Beijing 100083,China;Spatial-Gradient-Based Digital Volume Correlation Technique for Internal Deformation Measurement[J];Acta Optica Sinica;2011-06
3 Tang Zhengzong Liang Jin Guo Cheng(School of Mechanical Engineering of Xi′an Jiaotong University,Xi′an,Shaanxi 710049,China);Slant-Axis Digital Image Correlation Method Based on Photogrammetric Correction[J];Acta Optica Sinica;2011-11
4 SUN Tao1,2,LIANG Jin1,CAI Yong3,WANG Yi-qing1(1.School of Mechanical Engineering,Xi′an Jiaotong University,Xi′an 710049,China; 2.Department of Mechanical and Electrical Engineering, Sichuan Engineering Technical College,Deyang 618000,China; 3.School of Manufacturing Science and Engineering, Southwest University of Science and Technology,Mianyang 621010,China);Measurement of deformations for copper/aluminum clad under tension with digital speckle correlation[J];Optics and Precision Engineering;2012-12
5 QIN Fei,AN Tong,WANG Xu-ming(College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100124,China);Rate-dependent Constitutive Model for Lead-free Solders Considering Damage Effect[J];Journal of Beijing University of Technology;2013-01
6 LUO Yuan,JIANG Qiuzhao,ZHANG Yi(Key Laboratory of Micro-Electronics Engineering,Chongqing Education Commission, Chongqing University of Posts and Telecommunications,Chongqing 400065,China);Sub-pixel image matching based on fractal dimension[J];Journal of Chongqing University;2013-04
7 Pan Bing Yu Liping Wu Dafang(Institute of Solid Mechanics,School of Aeronautic Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);High-Accuracy Two-Dimensional Digital Image Correlation Measurement System Using a Bilateral Telecentric Lens[J];Acta Optica Sinica;2013-04
8 ZHOU Zhao-hui,JI Wei,CAO Hai-qiao,HAO Ai-guo,JIANG Xue-qiang(Institute of Machinery Manufacturing Technology,China Academy of Engineering Physics,Mianyang 621900,China);Drawing and performance evaluation of 5A06 alloy shell[J];Forging & Stamping Technology;2013-03
9 YU Hai;GUO Rong-xin;XIA Hai-ting;YAN Feng;ZHANG Yu-bo;HE Tian-chun;Key Laboratory of Yunnan Higher Education Institutes for Mechanical Behavior and Microstructure Design of Advanced Materials,Department of Engineering Mechanics,Kunming University of Science and Technology;Yunnan University;;Application of digital image correlation method in measuring linear expansion coefficients of WC/Cu composites[J];Optics and Precision Engineering;2013-10
10 Zhang Huajun;Li Guihua;Liu Cheng;Wang Dan;School of Electrical Engineering and Automation,Anhui University;;Reliable Initial Guess Based on SURF Feature Matching in Digital Image Correlation[J];Acta Optica Sinica;2013-11
China Proceedings of conference Full-text Database 1 Hits
1 LI De-gui;WANG Fang;HUANG Guang-yan;FENG Shun-shan;State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology;;Simulation Study of Shock Initiation of Double-shell Charge Structure by Fragments[A];[C];2014
【Secondary Citations】
Chinese Journal Full-text Database 4 Hits
1 Han Mingbao a,Liu Zongde b,Liu Yiguang a( a .Beijing University,Beijing,100871) ( b .the North Electric Power University of China,Beijing,100085);AN EXPERIMENTAL STUDY ON THE MECHANICAL BEHAVIOR OF A3 STEEL UNDER RAPID HEATING[J];EXPLOSION AND SHOCK WAVES;1999-01
2 WANG Chunkui; HUANG Chenguang; SUN Yuanlong; DUAN Zhuping, (Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080);INFLUENCE OF HEATING RATE AND STRAIN RATE ON TENSILE STRENGTH OF 30CrMnSi[J];ACTA METALLRUGICA SINICA;1995-10
3 LIU Zongde;HAN Mingbao;SUN Chengwei;WANG Ren(Department of Mechanics, Peking University, Beijing,100871)(South West Insitute of Fluid Physics, Chengdu 610003);INELASTIC THERMO-SOFTENING OF METALS UNDER RAPID HEATING[J];ACTA METALLRUGICA SINICA;1995-19
4 Chen Yun-ming (Institute of Mechanics, Academia Sinica);THEORETICAL ANALYSIS OF THE HIGH FREQUENCY INDUCTION PLASMA AND ITS IMPEDANCE MATCHING[J];Acta Mechanica Sinica;1981-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved