Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Titanium Industry Progress》 2007-05
Add to Favorite Get Latest Update

Study on the Micron/Nano-Scale Ti(C,N) Based Cermet Tool Materials

Xu Liqiang1,Hou Zhigang1,Huang Chuanzhen2,Liu Jiaguang1(1.Yantai University,Yantai 264005,China)(2.Shandong University,Jinnan 250061,China)  
The effect of adding nano-scale alumna on mechanical properties and microstructure of micron-scale Ti(C,N) matrix cermet tool materials were investigated,which based on the mechanisms of grain improved fracture toughness.The results show that the mechanical properties of Ti(C,N) based cermet are greatly influenced by adding nano-scale alumna,especially the hardness and fracture toughness improved significantly.At the same time the disadvantages of low hardness and fracture toughness of Ti(C,N) ceramic cutting tool materials are eliminated.The microstructure observation and analysis by SEM show that Ti(C,N) grains are fined by nano-scale Al2O3 particles,and transgranular fracture mode of the material is mainly observed.The improvement of mechanical properties is due to the transformation of fracture mode and fining of Ti(C,N) grains.
【Fund】: 国家自然科学基金资助项目(50275086);; 山东省优秀中青年科学家科研奖励基金(03BS153)
【CateGory Index】: TG711
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved