Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Wuhan University of Technology》 2004-04
Add to Favorite Get Latest Update

Research and Progress of Yield Criterion for Sintered Powder Materials

HUA Lin 1,2 ,QIN Xun-peng 1 (1.School of Materials Science and Engineering, WUT, Wuhan 430070, China; 2.State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology, HUST, Wuhan 430074, China)  
The basic form of yield criterion and its research situation for sintered powder materials is briefly introduced. Several typical yield criterions for sintered powder materials are analyzed, the physical property of yield is explained from point of view of critical elastic deformation energy ratio. The effects of hydrostatic stress, deviatoric stress, matrix material property, initial and instant densities, and deformation strengthening on following yield of sintered powder material are revealed based on the physical law of yield and deformation, and a unified form of function for initial and following yield of sintered powder materials is derived. A simplified yield criterion and its application are discussed, and the special case of yield criterion for sintered powder materials, which expresses the yield criterion of fully dense material, is pointed out. The deformation pressures corresponding to isotropic pressing and pure shearing processes are calculated from the yield criterion for sintered powder materials. Furthermore the yield criterion for sintered powder materials is extended to the cases of loosely piled powder and fully dense material, it is in according with the fact of yield of loosely piled copper powder and fully dense copper.
【Fund】: 国家自然科学基金项目 (5 0 175 0 86 ) ;; 塑性成形模拟及模具技术国家重点实验室开放基金 (0 2 - 3)
【CateGory Index】: TF12
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 YU Si;LANG Li-hui;WANG Gang;HUANG Xi-na;XU Qiu-yu;DUAN Wen;School of Mechanical Engineering and Automation,Beihang University;;Research on numerical simulation of 2A12 aluminum alloy manufactured by hot isostatic pressing[J];粉末冶金工业;2016-02
2 LIN Qiquan;YAN Ming;YANG Fu;PENG Chuandong;School of Mechanical Engineering,Xiangtan University;;A Modified Yield Model of Powder Metal Material for Compaction Process[J];材料导报;2015-22
3 MA Jun-lin;LI Ping;XU Jie;TIAN Ye;XUE Ke-min;School of Materials Science and Engineering,Hefei University of Technology;;Properties and Densification Behavior of High Content of SiC Particles Reinforced Al-based Composites Prepared by HPT[J];稀有金属与硬质合金;2015-05
4 Lu Heng;Wei Qingsong;Xue Pengju;Wang Jiwei;Shi Yusheng;State Key Laboratory of Materials Processing and Die&Mould Technology,Huazhong University of Science and Technology;;Numerical Simulation and Verification of Near-net-shaping Inconel625 Powder Disk under Hot Isostatic Pressing[J];中国机械工程;2013-19
5 Li Li1,Xue Yong2(1.College of Mechatronic Engineering,North University of China,Taiyuan 030051 China;2.School of Mechanical Engineering and Automation,Beijing University of Aeronautics & Astronautics,Beijing 100191 China);The Progress of Study on Macroscopic Plastic Model of Porous Material[J];科技创新与生产力;2012-03
6 Liu Guocheng Shi Yusheng Wei Qingsong Xue Pengju(State Key Laboratory of Material Processing and Die and Mould Technology, Huazhong University of Science and Technology,Wuhan 430074,China);Numerical simulation of the densification of 316L powder during hot isostatic pressing[J];华中科技大学学报(自然科学版);2011-10
7 GUO Biao1,GE Chang-chun1,2,ZHANG Sui-cai2,ZHANG Yu2(1.School of Materials Science & engineering,Southwest Jiaotong University,Chengdu 610031,China;2.Institute of Special Ceramics and Powder Metallurgy,School of Materials Science& Engineering,University of Science and Technology Beijing,Beijing 100083,China);POWDER FORGING TECHNOLOGY AND ITS APPLICATION PROGRESS[J];粉末冶金工业;2011-03
8 HUANG Yong-jian,XU Zhi-qiang,LIU Cai (School of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,China);Research on Pore Closure in Large Bar Rolling Process Based on Relative Density[J];武汉理工大学学报;2010-10
9 XU Zhi-qiang1,HUANG Yong-jian1,2,LIU Cai1,DU Feng-shan1,SHAO Tao1(1.College of Mechanical Engineering,Yanshan University,Qinhuangdao,Hebei 066004,China; 2.Shijiazhuang Iron & Steel Co.Ltd.,Shijiazhuang,Hebei 050031,China);A Study of Pore Closure in Large Bar Rolling Process Based on Relative Density[J];北京理工大学学报;2009-12
10 Zheng Xiao, Lin Guoxiang, Yin Fang, You Yan (Department of Mechinery Engineering, Wuhan Polytechnic University, Wuhan 430023, China);Numerical simulation of oil plant based on interaction of fluid flow field and rheology field[J];农业工程学报;2006-11
【Citations】
Chinese Journal Full-text Database 3 Hits
1 Hua Lin;Zhao Zhongzhin(Wu Han Gong Xue Yuan);Numerical Solution of Slip Line Field and Its BoundaryConditions for Compressible Material in Plane Strain[J];应用力学学报;1995-03
2 Hua Lin; Zhao Zhongzhi;Wang Huachang(Wuhan Institude of Technology,Wuhan,430070);THE PLASTIC DEFORMATION OF COMPRESSIBLE SINTERED MATERIALS IN PLATE UPSETTING[J];固体力学学报;1995-02
3 Ren Xueping (University of Science and Technology, Beijing 100083, China) Wang Erde and Huo Wencan (Harbin Institute of Technology, Harbin 150006,China);THE YIELD CRITERION OF POWDER COMPACT[J];粉末冶金技术;1992-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIN Qi-quan;PENG Chuan-dong;DONG Wen-zheng;Schoo1of Mechanical Engineering,Xiangtan University;;A Modified Yield Function for Sintered Powder Material during Uniaxial Compression Process[J];材料科学与工程学报;2014-01
2 Cai Jinda;Xu Pengcheng;University of Shanghai for Science and Technology;;Optimization of Processing Methods for Powder Metallurgy Oil Bearing Hole and Expanding Force Calculations[J];中国机械工程;2013-21
3 QIN Xun-peng (Wuhan University of Technology,Wuhan,430070,Hubei);The Ways of Evaluation on Plastic Deformation for Compressible Sintering Materials[J];黄冈职业技术学院学报;2009-04
4 Zhang Yaxin Zheng Xiao Lin Guoxiang(School of Mechanical Engineering,Wuhan Polytechnic University,Wuhan 430023,China);Plasticity Model for Pressing of Sunflower Seeds[J];农业机械学报;2009-07
5 Zheng Xiao,Lin Guoxiang,Yin Fang,You Yan(Department of Mechanical Engineering,Wuhan Polytechnic University,Wuhan 430023,China);Nonlinear viscous-elastic-plastic model and creep simulation of sesame and peanut[J];农业工程学报;2006-09
6 ZHOU Ming-zhi LI Ping XUE Ke-min (School of Material Science and Engineer,Hefei University of Technology,Hefei 230009 China);Coupled thermo-mechanical FEM analysis of the sintered powder during upsetting process[J];塑性工程学报;2005-06
7 Zheng Xiao1 Lin Guoxiang1 Li Zhi1 Wang Shaomei2(1.Wuhan Polytechnic University 2.Wuhan University of Technology);Nonlinear Viscous-elastic-plasticity Constitutive Model of Rapeseed and Rapeseed Kernel[J];农业机械学报;2005-11
8 HUA Lin, QIN Xun-peng (School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China);Geometrical Properties of Two Yield Criteria for Powder Metallurgical Materials[J];武汉理工大学学报;2005-05
9 QIN Xun-peng,HUA Lin(College of Materials Science and Engineering, Wuhan University of Technology, Wuhan Hubei 430070,China);Generalized Yield Criterion for Sintered Powder Metallurgy Materials[J];汽车工艺与材料;2005-01
10 HUA Lin 1,2,QIN Xun-peng1(1.School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China;2.State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China);A Generalized Upper Bound Method for Powder Metallurgical Material in Plastic Plane Strain[J];武汉理工大学学报;2004-12
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 YU Si;LANG Li-hui;WANG Gang;HUANG Xi-na;XU Qiu-yu;School of Mechanical Engineering and Automation, Beihang University;;Study on the properties of 2A12 aluminum alloy powder prepared by hot isostatic pressing[J];粉末冶金工业;2015-05
2 DONE Fei;LI Ping;XUE Ke-min;Qian Chen-hao;LI Lin-feng;WANG Cheng-guo;School of Materials Science and Engineering,Hefei University of Technology;;Study on densification behavior of SiCp/Al metal matrix composite during equal channel angular extrusion and twist process[J];塑性工程学报;2014-03
3 LIN Qi-quan;PENG Chuan-dong;DONG Wen-zheng;Schoo1of Mechanical Engineering,Xiangtan University;;A Modified Yield Function for Sintered Powder Material during Uniaxial Compression Process[J];材料科学与工程学报;2014-01
4 SHI Wen-chao,LI Ping,LI Xiao,XUE Ke-min(School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);EFFECT OF VOLUME FRACTION ON TENSILE PROPERTIES OF SiCp/Al ALLOY COMPOSITES BY HIGH-PRESSURE TORSION[J];粉末冶金工业;2013-01
5 LI Ping, ZHANG Xiang, XUE Ke-min, LI Xiao School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China;Effect of equal channel angular pressing and torsion on SiC-particle distribution of SiC_p.Al composites[J];Transactions of Nonferrous Metals Society of China;2012-S2
6 LI Xiao,LI Ping,XUE Ke-min,WANG Cheng,ZHANG Kai(School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);Effect of High-pressure Torsion on Particle Distribution of SiC_p-Al Composites[J];材料工程;2012-02
7 LI Xiao,LI Ping,XUE Ke-min,WANG Cheng (School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);Effects of high-pressure torsion pressure on microstructure and mechanical property of SiC_p-Al composites[J];中国有色金属学报;2012-02
8 SUN Chao,SHEN Ru-juan,SONG Min (State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Simulation of mechanical behaviors of SiC reinforced Al matrix composites by finite element method[J];中国有色金属学报;2012-02
9 Liu Guocheng Shi Yusheng Wei Qingsong Xue Pengju(State Key Laboratory of Material Processing and Die and Mould Technology, Huazhong University of Science and Technology,Wuhan 430074,China);Numerical simulation of the densification of 316L powder during hot isostatic pressing[J];华中科技大学学报(自然科学版);2011-10
10 WANG Yu-xin1,2,ZHANG Yu1,2,YANG Ying1,2,WANG Hua-yu1,2,YAN Biao1,2;Extrusion Die Technology and Research Evolution for Aluminum Alloy[J];金属功能材料;2011-04
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 LIU Pan;LIU Dui-bin;LI He;JIA Xu-ming;SHI Dong-jie;Technical Center,Great Wall Motor Company;Automotive Engineering Technology Research Center of Hebei Province;;Research on powder forging connecting rod[J];粉末冶金工业;2016-02
2 LANG Li-hui;WANG Gang;HUANG Xi-na;YU Si;DUAN Wen;XU Qiu-yu;Manufacture Engineering of Aerospace Vehicle, School of Mechanical Engineering and Automation,Beihang University;;Shielding effect of capsules and its impact on mechanical properties of P/M aluminium alloys fabricated by hot isostatic pressing[J];中国有色金属学报;2016-02
3 XU Lei;GUO Ruipeng;CHEN Zhiyong;JIA Qing;WANG Qingjiang;Institute of Metal Research, Chinese Academy of Sciences;School of Materials and Metallurgy, Northeastern University;;Mechanical Property of Powder Compact and Forming of Large Thin-Wall Cylindrical Structure of Ti55 Alloys[J];材料研究学报;2016-01
4 BAI Linna;LIU Fuping;WANG Sui;JIANG Feng;SUN Jun;CHEN Liangbin;WANG Fengyuan;State Key Laboratory for Mechanical Behavior of Materials,Xi'an Jiaotong University;School of Automobile and Transportation,Qingdao Technological University;;MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Fe-C-Cu POWDER-FORGED CONNECTING ROD[J];金属学报;2016-01
5 ZHAO Zhang-long;LI Hui;GUO Hong-zhen;YAO Ze-kun;School of Material Science and Engineering,Northwestern Polytechnical university;;A Review on the Development of Titanium Powder Forging Technology[J];精密成形工程;2015-06
6 Huang Jun;Xue Pengju;Wei Qingson;Shi Yusheng;State Key Laboratory of Material Process and Die and Mould Technology,Huazhong University of Science and Technology;;Research on Near-Net-Shaping Ti6Al4V Alloy Parts under Two-Step Hot Isostatic Pressing[J];中国机械工程;2015-18
7 LI Jian-jun;HUANG Mao-lin;PENG Qian-zi;WEI Zhi-wen;ZHANG Qiang;JIA Bei;LEI Xue-feng;Forging Workshop of China National South Aviation Industry Co. ,Ltd.;;Development Status and Trends of Forging Technology[J];热处理技术与装备;2015-03
8 Huang Jun;Xue Pengju;Cai Chao;Wei Qingsong;Shi Yusheng;Liu Jinhui;State Key Laboratory of Materials Processing and Die & Mould Technology,Huazhong University of Science and Technology;Modern Manufacture Engineering Center,Heilongjiang University of Science and Technology;;Mechanical Properties of Ti6Al4V Alloy Prepared by Two Different Hot Isostatic Pressing Processes[J];稀有金属;2016-02
9 Yu Si;Lang Lihui;Yao Song;Wang Gang;Bu Guoliang;Xu Qiuyu;School of Mechanical Engineering and Automation,Beihang University;Institute of Chemical Materials,CAEP;;Research on numerical simulation of hot isostatic pressing for turbine disk shaped by TC11 titanium alloy powder[J];锻压技术;2015-03
10 LI Wei;DU Yuhong;School of Materials Science and Engineering, Huazhong University of Science and Technology;Hebi College of Vocation and Technology;;Microstructure and Tensile Properties of Ti-43Al-5V-4Nb Alloy Using Rapid Heating and Unjacketed Forging Technique[J];铸造技术;2014-12
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 Wang Jen;PLASTIC FLOW BETWEEN PARALLEL RIGID PLATES UNDER COMPRESSION[J];北京大学学报(自然科学);1956-04
Similar Journals
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved