Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《New Carbon Materials》 2005-02
Add to Favorite Get Latest Update

The effect of C/C composites characteristic on sliding friction and wear behavior

LI Xin-chun, YI Mao-zhong, FENG Yi-lei, GE Yi-cheng, HUANG Qi-zhong (State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China)  
The sliding friction and wear behaviors of C/C composites to be used in the seal ring of the main axis of turbine engines for airplane were tested on a MM-2000 ring-block frictional tester. The effect of preparation conditions, graphitization treatment in the final step, density, and carbon fiber direction in the composites on the behavior was investigated. It is found that after CVI, resin impregnation, densification and graphitization, the C/C composites have good tribology properties. When the composites are graphitized in the final step, their densities are higher and tribology properties are better than those of un-graphitized samples. When the load is moderate, the friction coefficient of perpendicular samples is higher than that for parallel ones, but the volume loss of perpendicular samples is lower than that for parallel ones. The C/C composite rings are superior to those made of high strength graphite for this application.
【Fund】: 高校骨干教师基金(教技司[2000]143号)~~
【CateGory Index】: TB332
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 CHEN Qinghua,DENG Hongbing,XIAO Zhichao,SU Junming,PENG Zhigang(Xi’an Aerospace Composite Material Institute Chaoma Science & Techonology Ltd.,Xi’an 710025);Factor Analysis of Tribological Behavior of Carbon/Carbon Composites:Material Character[J];Materials Review;2007-S1
2 PAN Zu-jin,HUANG Xiang-dong,CHEN Jin-fa,LIU Xu-li,LI Qiang(College of Materials Science and Engineering,Fuzhou university,Fuzhou 350002,China);Effects of Graphites content on Friction and Wear Performances of C/C Composites Fabricated by Hot-pressing Process[J];Journal of Materials Science and Engineering;2008-04
3 GU Li-min,XIAO Zhi-Chao,SU Jun-Ming,PENG Zhi-gang,XING Ru-peng(Xi’an Aerospace Material Institute Xi’an ChaoMa Technology Co.Ltd Xi’an,710025);Research on brake pressure-moment property of carbon brake disc for aircraft[J];Materials Science and Engineering of Powder Metallurgy;2010-02
4 PENG Ke,YI Mao-zhong,GE Yi-cheng(State Key Laboratory of Powder Metallurgy,Central South University,Changsha 4100831,China);Sliding friction wear behaviors of C/C composites coupled with GH4169 alloy and high-strength graphite[J];Materials Science and Engineering of Powder Metallurgy;2010-02
5 XIAO Zhichao1,CHEN Qinghua2,JIN Zhihao1,HAO Zhibiao2,SU Junming2,PENG Zhigang2 (1.School of Materials Science,Xi'an Jiaotong University,Xi'an 710049;2.Chaoma Technology Co.Ltd.,Xi'an Aerospace Composite Material Institute,Xi'an 710025,China);EFFECT OF HEAT TREATMENT TEMPERATURE ON THE TRIBOLOGICAL PROPERTIES OF CARBON FIBER REINFORCED CARBON COMPOSITES[J];Journal of the Chinese Ceramic Society;2008-08
6 TANG Rui1, WANG Ji-ping2, LONG Chong-sheng1, JIN Zhi-hao2 (1. National Key Laboratory for Nuclear Fuel and Materials, Nuclear Power Institute of China, Chengdu, 610041, China; 2. State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an, 710049, China);Structure and Properties of C/C-SiC Prepared by Reactive Melt Infiltration[J];Nuclear Power Engineering;2009-01
7 ZHONG Tao-sheng1,2,YI Mao-zhong1,GE Yi-cheng1,HUANG Bo-yun1(1.State Key Laboratory of Powder Metallurgy,Central South University,Changsha Hu'nan 410083,China;2.School of Applied Science,Jiangxi University of Technology and Science,Ganzhou Jiangxi 341000,China);Densification methods for C/C composites and their characteristics[J];Heat Treatment of Metals;2009-02
8 Zhang Xiaoming,Li Kezhi,Li Hejun,Zhang Shouyang,Yan Xiafeng(Carbon/Carbon Composites Research Center,Northwestern Polytechnical University,Xi'an 710072);Influence of BN on the Properties of the Carbon/Carbon Composites[J];Mechanical Science and Technology for Aerospace Engineering;2010-01
9 SHANGGUAN Qian-qian,CAI Mao-hua(College of Mechanical and Electronic Engineering,Shanghai Normal University,Shanghai 201418,China);Development and applications of carbon fiber and its composites[J];Journal of Shanghai Normal University(Natural Sciences);2008-03
10 Su Jun—ming Xiao Zhi—chao Meng Fan—cai Zhang Jian Xin Jian—guo Xi'an Chao'Ma Technology Co.LTD of Xi'an Aerospace Composites Research Institute,Xi'an 710025,China;EFFECT ON THE PROPERTIES OF CARBON BRAKES BY USING IN—SITU CARBON COMPENSATION INTEGRAL BONDING TREATMENT[J];Carbon;2008-01
China Proceedings of conference Full-text Database 1 Hits
1 XIE Hui-zhen,CUI Hong,LI Rui-zhen (Xi'an Aerospace Composites Research Institute,Xi'an 710025 );Effect of Heat-treatment Temperature on Friction and Wear Behavior of C/C Composite[A];[C];2010
【Citations】
Chinese Journal Full-text Database 5 Hits
1 XU Huijuan, XIONG Xiang, HUANG Baiyun, PENG Jianxinversity, Changsha 410083, China );Friction Properties of Carbon/Carbon Composites with Different Pyrocarbon Structure[J];Tribology;2003-04
2 ZOU Zhi qiang, TANG Zhong hua, XIONG Jie (State Key Laboratory for Powder Metallurgy, central South University of Technology, Changsha 410083, China);THE MANUFACTURING OF C/C COMPOSITE BRAKE DISK BY MEANS OF THERMAL GRADIENT CVD DENSIFICATION TECHNIQUE[J];NEW CARBON MATERIALS;2000-02
3 ZOU Lin hua 1, HUANG Yong 1, HUANG Bai yun 2, HUANG Qi zhong 2 (1. Department of Material Science and Engineering, Tsinghua University, Beijing 100084, China; 2. Powder Metallurgy Research Institute, Central South University, Hunan 410083, C;THE RELATIONSHIP AMONG MICROSTRUCTURES,PROCESSING PARAMETERS AND PROPERTIES FOR CARBON-CARBON COMPOSITES[J];New Carbon Materials;2001-04
4 GONG Qian ming, HUANG Qi zhong, HUANG Bai yun, WU Feng qiu, CHEN Teng fei, ZHANG Fu qin (State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China);EFFECT OF CARBONIZATION PRESSURE ON THE MORPHOLOGY OF PITCH DERIVED CARBON AND DENSIFICATION EFFICIENCY OF C/C COMPOSITES USED FOR AIRCRAFT BRAKES[J];New Carbon Materials;2002-02
5 JIANG Jianchun,HUANG Boyun,XIONG Xiangy, Changsha410083, China);Effect of structure integrality of aircraft braking C/C composites on their friction coefficients[J];New Carbon Materials;2003-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 GUO Chen,GUO Lingjun,LI Hejun,LI Kezhi(State Key Laboratory of Solidification Processing,Northwestern Polytechnical University,Xi’an 710072,China);Fracture mechanism of the joint between carbon-carbon composites and Ni based high temperature alloy[J];Ordnance Material Science and Engineering;2009-03
2 HOU Dang-she1,2,LI Ke-zhi2,LI He-jun2,DU Hong-ying3(1.Xianyang Vocational Technical College,Xianyang 712000,Shaanxi,China;2.National Key Laboratory of Thermostructure Composite Materials,Northwestern Polytechnical University,Xi'an 710072,Shaanxi,China;3.Institute of Product Design,Jinxi Machinery Industries Group Corporation,Taiyuan 030027,Shanxi,China);On oxidation protection of C/C composites at 1 680 ℃[J];Journal of Baoji University of Arts and Sciences(Natural Science Edition);2009-02
3 LI Ailan ZENG Xierong CAO Lamei TANG Xin GAI Qidong (Beijing Institute of Aeronautical Materials,Beijing 100095;Department of Materials Science and Engineering,Shenzhen University,Shenzhen 518060);Current Status of Research on High Temperature Materials for Advanced Aircraft Engines[J];Materials Review;2003-02
4 XIE Zhiyong HUANG Qizhong SHU Zhe'an ZHANG Mingyu LIANG Jinhua HUANG Boyun (State Key Laboratory for Powder Metallurgy,Central South University,Changsha 410083);Research on a Method of Quickly Preparing C/C Composites[J];Materials Review;2005-01
5 CONG Hongmei College of Materials Science and Engineering,Shandong University,Jinan 250061; Shandong Metallurgical Research Institute,Jinan 250014;XI Jianren LI Musen College of Materials Science and Engineering,Shandong University,Jinan 250061;DAI Zhenguo QI Guanghui YANG Xiaotao Shandong Shanda Wit Science and Technology Co.LTD.,Jinan 250061;Study on the Friction and Wear Properties of C/C Composites[J];Materials Review;2005-07
6 HUANG Lihai,LI Hejun,LIU Hao,HUANG Fengping(Engineering & Technology Research Center of C/C Composites, Northwestern Polytechnical University, Xi’an 710072);Study on the Mechanical Properties of the Carbon Felt and C/C Composites with Weaved Structure at Room Temperature[J];Materials Review;2006-09
7 ZHOU Zhenzhong~ 1,2 ,LI Tiehu~1,LI Caixia~2,SONG Faju~1(1 School of Material Science and Engineering,Northwestern Polytechnical University,Xi'an 710072; 2 Armed Police Engineering College,Xi'an 710086);Progress in Study on Carbon Nanotubes Reinforced Carbon/Carbon Composites[J];Materials Review;2006-10
8 XU Guozhong, LI Hejun, ZHANG Shouyang, CHEN Fuxiao, LI Wei, BAI Ruicheng(The Research Center of C/C Composites, Key Laboratory of Ultrahigh Temperature Composites, Northwestern Polytechnical University, Xi'an 710072);Influence of the Parameters of ICVI Technics on Rapid and Uniform Densification of C/C Composites[J];Materials Review;2006-12
9 ZHANG Leilei, LI Hejun, LI Kezhi, WANG Pengyun, XU Xinhang (School of Materials Science, Northwestern Polytechnical University, Xi’an 710072);Research Progress in the Artificial Hip Joint Prostheses[J];Materials Review;2008-04
10 XIA Lihong HUANG Boyun ZHANG Fuqin HUANG Qizhong WANG Lei (State Key Laboratory for Powder Metallurgy,Central South University,Changsha 410083);Research Progress in Densification Techniques for Carbon/Carbon Composites[J];Materials Review;2008-05
China Proceedings of conference Full-text Database 8 Hits
1 BAI Ruicheng,REN Musu,ZHANG Jiabao,LI Hong,LIU Yutai,SUN Jinliang (Composite Materials Research Center,Shanghai University,Shanghai 200072);Influence of The Factors of Icvi Technology on Densification of C/C Composites[A];[C];2008
2 Su Junming Xiao Zhichao Meng Fancai XinJianguo PengZhigang XueNingjuan Li Rui Gu Limin Shao Haicheng (Xi'an ChaoMa Technology Co.Ltd of Xi'an Aerospace Material Institute, Xi'an 710025);Friction properties of carbon-carbon composite aircraft brakes at different initial braking speeds and pressure[A];[C];2006
3 Zeng xierong,Zou jizhao (Department of Materials Science, Shenzhen University, Shenzhen 518060, P. R. China Shenzhen Key Laboratory of Special Functional Materials, Shenzhen University, Shenzhen 518060, P. R.China School of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an, Shannxi, 710072, P. R. China);PREPARATION OF CARBON/CARBON COMPOSITES USING MICROWAVE-HEATED PYROLYSIS DEPOSITION TECHNOLOGY[A];[C];2006
4 HUANG Jian,ZOU Wu, HAO Zhibiao,WANG Juan.CHENG Wen (Xi'an Aerospace Composites Research Institute ,Xi'an 710025,China);EFFECTS OF CABONIZATION PRESSURE ON MICROSTRUCTURE AND THERMO-PHYSICAL PROPERTIES of PITCH DERIVED CARBON[A];[C];2006
5 ;Research Progress on Fatigue Properties of C/C Composites[A];[C];2010
6 XIE Hui-zhen,CUI Hong,LI Rui-zhen (Xi'an Aerospace Composites Research Institute,Xi'an 710025 );Effect of Heat-treatment Temperature on Friction and Wear Behavior of C/C Composite[A];[C];2010
7 Cao Weifeng,Li Hejun,Guo Lingjun,Li Kezhi,He Yonggang (Carbon/Carbon Composites Technology Research Center,Northwestern Polytechnical University,Xi’an 710072);The influence of mechanical property of CVI-C/C composites by heat treated at different temperature[A];[C];2010
8 Xie Qiao, Zhu Dong-mei, Luo Fa, Zhou Wan-cheng State Key Laboratory of Solidification Processing, Northwestern Polytechnical Universit Xi' an 710072 china;Research on friction and wear properties of C/C-SiC composites[A];[C];2006
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 ;Present Situation on Carbon-fibre Reinforced Composite and Its Developing Trends in China[J];Materials Review;1995-05
2 ;Research Status Quo and Outlook for Carbon Fiber Reinfroced Copper(Cu) & Plumbun(Pb) Matrix Composites[J];Materials Review;1998-03
3 Yang Haifeng Ran Xinquan Yang Yanqing( Chemistry Department .Nothwest University ,Xi'an 710069) ( Department of Material Science .Northwestern Polytechnic University ,Xi'an 710072);Rapid Densification Process of Preparing Carbon-Carbon Composites[J];Materials Review;2000-11
4 CONG Hongmei College of Materials Science and Engineering,Shandong University,Jinan 250061; Shandong Metallurgical Research Institute,Jinan 250014;XI Jianren LI Musen College of Materials Science and Engineering,Shandong University,Jinan 250061;DAI Zhenguo QI Guanghui YANG Xiaotao Shandong Shanda Wit Science and Technology Co.LTD.,Jinan 250061;Study on the Friction and Wear Properties of C/C Composites[J];Materials Review;2005-07
5 CHEN Qinghua,DENG Hongbing,XIAO Zhichao,SU Junming,PENG Zhigang(Xi’an Aerospace Composite Material Institute Chaoma Science & Techonology Ltd.,Xi’an 710025);Factor Analysis of Tribological Behavior of Carbon/Carbon Composites:Material Character[J];Materials Review;2007-S1
6 Dai Yongyao Beijing Institute of Aeronautical Materials;Carbon-Carbon Composites and Their Applied Prospects in Aviation Industries[J];Journal of Materials Engineering;1993-11
7 LIU Qian,LI Jia lu,LI Xue ming (Tianjin Institute of Textile and Technology, Tianjin 300160,China)[WT5HZ];Research of Bending and Compression Properties of 3 d Braided Composite Materials[J];JOURNAL OF MATERIALS ENGINEERING;2000-08
8 TAN Jing shuang, ZHANG Bao fa,JIANG Hai,LI Dong sheng (Baimtec Material Co , Ltd ,Beijing 100095, China);Friction and Wear Properties and Mechanism of Carbon-Carbon Composites[J];Journal of Materials Engineering;2001-10
9 LIU Ling, YIN Ning, KANG Mao\|qing, WANG Xin\|kui (Institute of Coal Chemical,Chinese Academy of Sciences, Taiyuan\ 030001, China);Research on Whisker Toughening Mechanism for Coposites[J];MATERIALS SCIENCE AND ENGINEERING;2000-02
10 HUANG Li-hai, LI He-jun, HU Zhi-biao(Engineering & Technology Research Center of C/C Composites, Northwestern Polytechnical University, Xi'an 710072,China);Effect of Graphitization Degree on 2.5D C/C Composite's Tribological Properties on Low Energy[J];Journal of Materials Science and Engineering;2005-05
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 SU Qingqing,LI Weiwei,LIU Lei,SHEN Bin(State Key Laboratory of Metal Matrix Composites,Shanghai Jiao Tong University,Shanghai 200240);Application and Progress in Development of the Carbon Fiber Reinforced Copper Matrix Composites[J];Materials Review;2010-05
2 XU Shunjian~1,LIU Bo~1,QIAO Guanjun~2 (1 Department of Solar Energy Science and Engineering,Xinyu College,Xinyu 338004;2 State Key Laboratory for Mechanical Behavior of Materials,Xi'an Jiaotong University,Xi'an 710049);Analysis of Pyrolytic Process of a Phenolic Resin Used to Fabricate Mesoporous Carbon Monoliths[J];Materials Review;2010-S1
3 CUI Yuanyuan,BAI Ruicheng,SUN Jinliang,REN Musu,ZHANG Jiabao,ZHOU Chunjie(Research Center of Composite Materials,Shanghai University,Shanghai 200072);Research of C/C-SiC Composites Prepared by Liquid Silicon Infiltration[J];Materials Review;2011-01
4 YANG Huiyong,LIU Rongjun,ZHOU Xingui,CAO Yingbin(Key Laboratory of Novel Ceramic Fibers & Composite Materials,National University of Defense Technology,Changsha 410073);New Board Material—C/SiC Composite[J];Materials Review;2012-01
5 XIAO Zhi-chao1,JIN Zhi-hao1,SHAO Hai-cheng2,SU Jun-ming2,PENG Zhi-gang2,LI Yong-jun2(1 School of Materials Science,Xi'an Jiaotong University,Xi'an 710049,China;2 Chaoma Technology Co.Ltd,Xi'an Aerospace Composite Material Institute,Xi'an 710025,China);Performance and Test Research of Fluorine-preparing C/C Composites Electrolysis Plank[J];Journal of Materials Engineering;2008-01
6 YANG Cai-yun1,HU Zhen-ying1,ZHOU Hong-ying2(1 Tianjin and Ministry of Education Key Laboratory of Advanced Textile Composite Materials,Textile College,Tianjin Polytechnic University,Tianjin 300160,China;2 Xi'an Aerospace Composites Research Institute,Xi'an 710025,China);Influence of 3D Woven Preform Architectures on Mechanical Properties of C/C Composites[J];Journal of Materials Engineering;2009-09
7 CHEN Qing-hua1, XIAO Zhi-chao1,2, DENG Hong-bing1, SU Jun-ming1, PENG Zhi-gang1(1. Chaoma technology CO.Ltd., Xi'an Aerospace Composite Material Institute, Xi'an 710025, China; 2. School of Materials Science, Xi'an Jiaotong University, Xi'an 710049, China; 3.The 4th Academy of CASC, Xi'an 710025, China);Characteristics of Wear Surface Morphology and Wear Mechanism of C/C Composite Prepared by Foreign Manufacturers[J];Journal of Materials Science and Engineering;2008-02
8 CHEN Qing-hua~1,DENG Hong-bing~2,XIAO Zhi-chao~3,SU Jun-ming~1,PENG Zhi-gang~1(1.Xi′an Aerospace Composite Material Institute,Chao Ma Science & Technology Co.Ltd.,Xi′an 710025,China;2.The 4th Academy of CASC,Xi′an 710025,China;3.School of Materials Science,Xi'an Jiaotong University,Xi'an 710049,China);Relationship between Friction Properties and Friction Surface Status of C/C Composites[J];Journal of Materials Science and Engineering;2008-03
9 FAN Xing,ZHENG Yong-ping,SHEN Wan-ci(Key Laboratory for Advanced Materials of Ministry of Education,Department ofMaterials Science and Engineering,Tsinghua University,Beijing 100084,China);Influence of electrolytic etching currentcollector Cu foil on the performance of anode[J];Battery Bimonthly;2009-03
10 LIAO Ya-ping,YI Mao-zhong,YANG Lin (State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Tribological behaviors of C/C-Cu composites carrying electric current[J];Materials Science and Engineering of Powder Metallurgy;2009-06
China Proceedings of conference Full-text Database 5 Hits
1 SU Junming, XIAO Zhichao, MENG Fancai, PENG Zhigang, GU Limin, XUE Ningjuan (Xi’an ChaoMa Technology Co.Ltd of Xi’an Aerospace Material Institute, Xi’an 710025);Present Situation and Progress in Civilian Aircraft Carbon Brake Disc Materials[A];[C];2008
2 QIU Hai-peng, LUO Jing-hua, SUN Ming, LI Xiu-qian, ZHU Yun-ji (Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024,China);Microstructure and mechanical properties of carbon/carbon composite[A];[C];2009
3 Su Junming Xiao Zhichao Meng Fancai XinJianguo PengZhigang XueNingjuan Li Rui Gu Limin Shao Haicheng (Xi'an ChaoMa Technology Co.Ltd of Xi'an Aerospace Material Institute, Xi'an 710025);Friction properties of carbon-carbon composite aircraft brakes at different initial braking speeds and pressure[A];[C];2006
4 FAN Bingbing~1 WANG Lina~1 ZHANG Rui~(1,2) 1(School of Materials Science and Engineering,Zhengzhou University,Henan,450051) 2(Zhengzhou Institute of Aeronautial Industry Management,Zhengzhou University);Theoretical study of the water molecule on graphite surface:Density Functional Theory Method[A];[C];2009
5 NIU Yue,JIAO Wei-cheng~*,WANG Rong-guo,YANG Fan (Science and Technology on Advanced Composites in Special Environments Laboratory, Harbin Institute of Technology,Harbin,150001,China);A STUDY OF THE INTERFACIAL PERFORMANCE OF CARBON FIBER REINFORCED T800 CF/5228 BMI COMPOSITES[A];[C];2012
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 LI Chong jun,MA Bo xin (The 43rd Institute of the Fourth Academy of CASC, Xi'an 710025,China) JIN Zhi hao (Xi'an Jiaotong University, Xi'an 710049, China);A Review of Chemical Vapour Deposition/ Infiltration Technology[J];JOURNAL OF SOLID ROCKET TECHNOLOGY;1999-01
2 SUN Le min, LI He jun, ZHANG Shou yang, JIANG Kai yu, HOU Xiang hui (Northwestern Polytechnical University, Xi′an 710072);Pitch-based C/C Composites and the Current Research Situation[J];MECHANICAL SCIENCE AND TECHNOLOGY;2000-01
3 ZOU Lin hua 1,2 , HUANG Bo yun 2, HUANG Qi zhong 2, XIONG Xiang 2, HUANG Yong 1 (1.Department of Material Science and Engineering, Tsinghua University, Beijing 100084, China; 2.The State Key Lab for Powder Metallurgy, Central South University;Current State of Tribological Investigation on Carbon-carbon Composites at Abroad[J];Tribology;2001-02
4 XU Hui juan, XIONG Xiang, JI Dong ying, PENG Jian xin (State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China);Effect of Braking Speed on Friction Properties of C/C Composite Braking Pad[J];Tribology;2001-06
5 SONG Yong- zhong, SHI Jing- li, LANG Dong- sheng, SONG Jin- ren, LIU Lang (Shanxi Institute of Coal Chemistry, Chinese Academy of Sciences, Shanxi Taiyuan 030001, China);STUDY ON IMPREGNATION-CARBONIZATION PROCESS OF CARBON/CARBON COMPOSITES[J];CARBON TECHNIQUES;2000-03
6 JI A lin, MA Bo xin, HUO Xiao xu, LIU Hong lin, ZENG Xiao mei, LI Yi he (The 43 Insititute of CASC, xi'an 710025, China);DENSIFICATION OF THE 2D C/C COMPOSITES BY USING CLVD[J];NEW CARBON MATERIALS;2000-01
7 ZOU Zhi qiang, TANG Zhong hua, XIONG Jie (State Key Laboratory for Powder Metallurgy, central South University of Technology, Changsha 410083, China);THE MANUFACTURING OF C/C COMPOSITE BRAKE DISK BY MEANS OF THERMAL GRADIENT CVD DENSIFICATION TECHNIQUE[J];NEW CARBON MATERIALS;2000-02
8 SONG Yong zhong, SHI Jin li, ZHAI Geng tai, SONG Jin ren, LIU Lang (Institute of Coal Chemistry, Chinese Academy of Science, Taiyuan 030001, China);MATHEMATICAL SIMULATION FOR PITCH-IMPREGNATION PROCESS[J];New Carbon Materials;2000-04
9 HUANG Zhi feng, XIONG Xiang, XU Hui juan (State Key Laboratory for Powder Metallurgy, Changsha 410083, China);PREPARATION OF C/C COMPOSITE SAMPLE FOR METALLOGRAPHIC OBSERVATION[J];New Carbon Materials;2000-04
10 ZHI Lin jie, SONG Jin ren, LIU Lang (Institute of coal chemistry, Chinese academy of sciences, Taiyuan 030001, China);AN EFFECTIVE METHOD FOR PITCH COMPOSITION DESIGN[J];New Carbon Materials;2001-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved