Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Computer & Communication》 2019-17
Add to Favorite Get Latest Update

Development of 3D Machining Simulation Software for NC Machining G Code Program

Liang Zicai;China-EU Institute for Clean And Renewable Energy, Huazhong University of Science and Technology;  
Using Qt platform and OpenGL library, the author developed a three-dimensional machining simulation software for NC machining G code program. The software can extract the point information of the processing image and draw the processing image according to the loaded G-code program, and can simulate the process of cutting tool. At the same time, it can detect the errors of G-code program and give the error information, so as to facilitate users to verify the feasibility of G-code in advance. By using this software, technicians can verify the processing effect of G code without trial processing, thus reducing the waste of resources and shortening the development cycle.
【CateGory Index】: TG659;TP391.9
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 2 Hits
1 PAN Hai-hong;YE Wen-hai;CHEN Lin;ZHANG Qiu-jie;College of Mechanical Engineering,Guangxi University;;The Design of G Code Compiler for Special Compound Machining Center NC System[J];组合机床与自动化加工技术;2015-06
2 LI Chun-lei(Mechanical & Electrical Engineering Department,Suzhou Institute of Industrial Technology,Suzhou 215104,China);Research on Processing Error Modeling Technology of Virtual CNC Turning[J];机械工程与自动化;2011-04
【Secondary Citations】
Chinese Journal Full-text Database 9 Hits
1 JIA Xv,LU Xiao-hong,WANG Xin-xin,JIA Zhen-yuan(Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education,Dalian University of Technology,Dalian Liaoning 116024,China);Design and Realization of G-code Compiling for Micro-milling Machine NC System Based on PMAC[J];组合机床与自动化加工技术;2012-03
2 LIU Si-sheng,LI Song-sheng,CHEN Ping (Shanghai Key Laboratory of Mechanical Automation and Robotics,Shanghai University,Shanghai 200072,China);Design and implementation of CNC G code interpreter and simulation module[J];机械设计与制造;2012-01
3 ZHANG Xue-fei,LI Jian (College of Mechanical and Energy Engineering,Jiangsu Polytechnic University,Changzhou 213016,China);Design on G code compiling for opening NC system[J];机械设计与制造;2010-10
4 LIN Li-zong,LAN Gang,SONG Qi-sheng,et al;G code system oriented to Googol NC card[J];模具技术;2009-01
5 ZHOU Gang WU Yijie PAN Xiaohong (The State Key Lab of Fluid Power Transmission and Control,Zhejiang University,Hangzhou 310027);Software Modules Real Time Scheduling Framework in CNC System[J];机械工程学报;2009-01
6 Wu KangniLi BinChen JihongNational Numerical Control Technical Engineering Center, Huazhong University of Science and Technology,Wuhan,430074;Implementation of NC Code Interpreter of Open Architecture NC System Platform[J];中国机械工程;2006-02
7 FANG Shu-wen,ZHANG Gui-xiang (College of Mechanical and Automative Engineering,Hunan University,Changsha 410082,China);Development of Open CNC System Software Based on Windows 2000[J];组合机床与自动化加工技术;2005-11
8 Zhang Zheng Wu Xutang Ma Shugen Cao Binggang (Xi'an Jiaotong Universisy);DEVELOPMENT OF THE MASTER CONTROL SYSTEM OF A HARDWARE INDEPENDENT ARCHITECTURE FOR CNC MACHINE TOOLS[J];机械工程学报;2003-02
9 GE Yan-jun,LU Bi-hong,WANG Qi-yi (Dalian Railway Institute,Dalian 116028) P421;On Physical Simulation Technology for Turning[J];机械科学与技术;2001-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved