Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Modern Manufacturing Engineering》 2009-03
Add to Favorite Get Latest Update

Study on CBN used for inner ring raceway thin-walled of ball bearing grinding wheel

ZHANG You-yang1,LI Chun-guang2(1 Zhengzhou Institute of Light Industry,Zhengzhou 450002,CHN;2 Zhongyuan University of Technology,Zhengzhou 450007,CHN)  
A method of grinding the inner ring raceway of the thin-walled ball bearing with CBN grinding wheel replacing Al2O3 grinding wheel is introduced,and the desired properties of CBN grinding wheel was determined.The method and the velocity rate of CBN wheel's dressing were deeply studied and a set of equipment dresser for it was designed.Its application showed that,both the grinding precision and surface quality of the inner raceway of the thin-walled ball bearing have been improved obviously,the roundness is promoted from 3μm to 2μm steadily,the roughness Ra is reduced from 0.4μm to 0.2μm,the variation of dimension is little,and no phenomenon of grinding burn is found.Extending the life span of the grinding wheel more than 50 times,while the productivity has been increased by 40 times.
【CateGory Index】: TG580.6
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 1 Hits
1 Feng Baofu et al;Dressing Methods of CBN Wheels and Their Applications[J];Tool Engineering;2001-12
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 WANG Xu-yue,JI Cong-ping,KANG Ren-ke,WANG Lian-ji,NIU Wei-guang(Key Lab.for Precis.and Non-tradit.Mach.Technol.of Minist.of Edu.,Dalian Univ.of Technol.,Dalian 116024,China);Experimental research on laser dressing of bronze bond diamond grinding wheel[J];Journal of Dalian University of Technology;2007-06
2 Chen Jianfei et al;A Study of Grinding the Spindel Tip of GCr15 Type by CBN Wheel and Its Dressing Mechanics[J];Journal of Textile Research;2003-06
3 LI Chunguang,WANG Denghua(School of Mechanical and Electrical Engineering,Zhongyuan University of Technology,Zhengzhou,Henan 450007,China);CBN grinding wheel grinds inner runaway of the GCr15 rings[J];Journal of Textile Research;2007-06
4 HUANG Dayu,WANG Xiaolu(Zhongyuan University of Technology,Zhengzhou,Henan 450007,China);CBN wheel grinding on the rollers skew tooth top-surface of drawing frames draft[J];Journal of Textile Research;2008-03
5 Chen Feng Liu Jia Chen Wuyi(School of Mechanical Engineering and Automation,Beihang University,Beijing 100191);Evaluation of the Dressing Effect for Vitrified CBN Grinding Wheel with the Wheel Topography[J];Aerospace Manufacturing Technology;2011-03
6 Zhang Jizhou Shi Guangyuan Mu Yunchao Fan Ping(Zhongyuan Institute of Technology, Zhengzhou 450007, China);RESEARCH ON GRINDING OF GCr15 BEARING STEEL SPINDLE WITH CBN GRINDING WHEEL[J];Diamond & Abrasives Engineering;2004-03
7 Guan Jialiang Wang Fan Yang Zhaoxu(Mechanical and Electronic Application Engineering Department of Beijing TechnicalUniversity,Beijing 100022,China);High efficiency ELID precision grinding of Al_2O_3 toughened ceramics[J];Diamond & Abrasives Engineering;2006-02
8 Shi Jianru(Mechanical and electrical school,Zhongyuan University of Technology,Zhengzhou 450007,China);Form grinding and dressing of spinning spindle using CBN grinding wheel[J];Diamond & Abrasives Engineering;2007-06
9 Huang Zongxiang Li Chunguang(School of Mechanical and Electronic Engineering,Zhongyuan University of Technology,Zhengzhou 450007,China);Experiment research on the grinding of inner ring raceway of thin-wall ball bearing using CBN grinding wheel[J];Diamond & Abrasives Engineering;2008-02
10 Wang Aizhen1,2 Wang Zhan2(1.Nanjing University of Aeronautics & Astronautics,Nanjing 210016,China)(2.Zhengzhou Research Institute for Abrasives & Grinding,Zhengzhou 450013,China);Research on dressing method and technology for vitrified CBN grinding wheel[J];Diamond & Abrasives Engineering;2008-02
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Qu Liqiang, Zhang Zhitao(13);Automatic Control of Feed Velocity for Ring Internal Surface Grinding[J];BEARING;1999-01
2 Wu Xiaoling et al;Dressing of Vitrified Bond CBN Grinding Wheel[J];TOOL ENGINEERING;1997-06
3 Zhu Bo et al;Electric Spark Truing of Superhard Grinding Wheel with Metal Bond[J];Tool Engineering;2000-12
4 Hu Zhonghui;A Study on the Dressing of CBN Grinding Wheel and Its Effecton the Ground Surface Integrity[J];;1992-03
5 Zuo Dunwen (Nanjing University of Aeronautics and Astronautics) Kawano Yoshihiro Yamashita Toshikazu (Kagoshima National College of Technology,Kagoshima,Japan) Wang Min (Nanjing University of Aeronautics and Astronautics);EFFECT OF CO 2 PULSED LASER SCANNING ON DIAMOND WHEEL PIECES[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;1999-02
6 He Qi et al. (Nanjing University of Aeronautics and Astranautics, Nanjing, China);Study on Multi-electromachining Dressing of Metal Bonded Diamond Grinding Wheel[J];CHINA MECHANICAL ENGINEERING;1998-03
7 KANG Renke(Northwestern Polytechnical University,Xi'an,China) YUAN Jingting SHI Xingkuan LAN Jie REN Jingxin p 493 496;Study on Laser Dressing of Superabrasive Grinding Wheels[J];CHINA MECHANICAL ENGINEERING;2000-05
8 ZHU Bo(Harbin Institute of Technology,Harbin,China) YUAN Zhejun ZHANG Feihu ZHAO Qingliang;Electrolytic in-Process Dressing(ELID)for Precision Grinding of Steel-Bonded Cemented Carbide and Analysis on Its Surface Quality[J];CHINA MECHANICAL ENGINEERING;2000-08
9 YAN Qiu sheng, et al(34);Studies on the Grinding Properties of CBN Quill——Selecting Wheel Dressing Process and Wheel Parameters[J];MANUFACTURING TECHNOLOGY & MACHINE TOOL;1999-09
10 Guo Yinbiao, et al;Dressing CBN Wheel with Cup Wheel Dresser and Its Machining Property[J];MANUFACTURING TECHNOLOGY & MACHINE TOOL;1999-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved