Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《稀有金属(英文版)》 2007-03
Add to Favorite Get Latest Update

Improvement of the matrix and the interface quality of a Cu/Al composite by the MARB process

XU Rongchang, TANG Di, REN Xueping, WANG Xiaohong, and WEN Yonghong National Engineering Research Center for Advanced Rolling Technology, University of Science and Technology Beijing, Beijing 100083, China  
The matrix accumulative roll bonding technology (MARB) can improve the matrix performance of metal com- posite and strengthen the bonding quality of the interface. In this research, for the first time, the technology of MARB was proposed. A sound Cu/Al bonding composite was obtained using the MARB process and the bonding characteristic of the interface was studied using scanning electricity microscope (SEM) and energy-dispersive spectroscopy (EDS). The result indicated that accumulation cycles and diffusion annealing temperature were the most important factors for fabricating a Cu/Al composite material. The substrate aluminum was strengthened by MARB, and a high quality Cu/Al composite with sound interface was obtained as well.
【Fund】: the National Natural Science Foundation of China (No. 50375019).
【CateGory Index】: TB331;TB302
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 2 Hits
1 WU Song-lin,YU Mei,LI Song-mei,XUE Feng,LIU Jian-hua School of Materials Science and Engineering,Beihang University,Beijing 100191,China;Fluorescent technology for corrosion prediction of aluminum alloys based on 8-hydroxy-quinoline[J];Journal of University of Science and Technology Beijing;2009-08
2 GUO Wei1,2,WANG Qu-dong1,2(1.National Engineering Research Center of Light Alloy Net Forming,Shanghai Jiao Tong University,Shanghai 200240,China;2.State Key Laboratory of Metal Matrix Composites,Shanghai Jiao Tong University,Shanghai 200240,China);Research progress of fabricating ultrafine-grained composites by severe plastic deformation[J];Forging & Stamping Technology;2010-01
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 JIA Shu-zhuo, GUO Xue-feng, XU Chun-jie, ZHANG Zhong-ming,L Tao (School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048, China);Microstructure and ageing behavior of Mg_2Si/Mg-Al composites produced by reciprocating extrusion[J];Ordnance Material Science and Engineering;2007-05
2 HU Qiang,JIE Xiao-ping,YAN Hong,ZHANG Fa-yun,CHEN Guo-xiang (Institute of Advanced Forming and Manufacturing and Die and Mold,Nanchang University,Nanchang 330031,China);Mechanical properties and damping capacity of AZ61 magnesium alloy matrix composites with SiC particulates[J];Forging & Stamping Technology;2008-02
3 HAN Ya-li1,LIU Jin-song1,2,ZHANG Fu-quan2(1.Department of Mechanical and Electronic Engineering,Air Force Aeronautical and Service Technical College,Changsha 410124,China;2.School of Materials Science and Engineering,Hunan University,Changsha 410082,China);Study on sheet rolling process of SiC_p particulate reinforced aluminum matrix composite[J];Forging & Stamping Technology;2008-05
4 GUO Sheng-li1,LI De-fu1, CHEN Dong2,WANG Hao-wei2(1. Processing Engineering Research Center,General Research Institute for Nonferrous Metals, Beijing 100088,China;2. State Key Laboratory of Metal Matrix Composite, Shanghai Jiaotong University, Shanghai 200030, China);Research on material constant values of TiB_2/Al during elevated temperature tensile test[J];Forging & Stamping Technology;2009-03
5 Youhong Zhang1), Guozhi Lv2), Hui Wang2), Bomei Si2), and Yueliang Cheng3) 1) The Second Artillery Engineering College, Xi’an 710025, China 2) School of Aeronautics, Northwest Polytechnical University, Xi’an 710072, China 3) Naval Aeronautical Engineering Academy Qingdao Branch, Qingdao 266041, China;Corrosion damage evolution and residual strength of corroded aluminum alloys[J];北京科技大学学报(英文版);2008-04
6 Z.M.Zhang~* C.J.Xu X.F.Guo S.Z.Jia School of Materials Science & Engineering,Xi'an University of Technology,Xi'an 710048,China;RECIPROCATING EXTRUSION OF IN SITU Mg_2Si REINFORCED Mg-Al BASED COMPOSITE[J];金属学报(英文版);2008-03
7 LUO F_Liang, LIU Zhi-Hong, CHEN Tian-Lu* (State Key Laboratory of Polymer Physics and Chemistry,Changchun Institute of Applied Chemistry,Chinese Academy of Sciences,Changchun 130022);Photo Chemical pH Sensitive Membrane of Cross-linking PVA with Congo Red Fixed on It[J];Chinese Journal of Applied Chemistry;2005-03
8 He Yi; Gong Menglian; Dong Ping; Huang Xuguang( Institute of Polymer Science, Zhongshan University, Guangzhou 510275);Synthesis and PhotophysicalBehaviour of Trioxinatoaluminium[J];ACTA SCIENTIARUM NATURALIUM UNIVERSITATIS SUNYATSENI;1995-02
9 Zhang Bing, Yuan Shouqian, L Shuang, Zhang Xifeng, Wang Chao (College of Materials Science and Engineering, Xi'an University of Architecture & Technology, Xi'an 710055, China);Effect of Accumulative Roll Bonding(ARB) Process on Microstructure and Mechanical Properties of 1060 Commercial Pure Aluminium[J];Chinese Journal of Rare Metals;2008-02
10 Yang Jian,Lian Youyun,Mao Changhui (Research Center of Advanced Electronic Materials,General Research Institutes for Non-Ferrous Metals of Beijing,Beijing 100088,China);Effect of Heat Treatment on Mechanical Properties of W_p/2024Al Composites Prepared by Powder Metallurgy[J];Chinese Journal of Rare Metals;2008-06
【Secondary References】
Chinese Journal Full-text Database 2 Hits
1 CHEN Wen-jie,ZHOU Qing,DENG Zhu-jun,ZHANG Fang-zhe(College of Mechanical & Electrical Engineering,Nanjing University of Aeronautics andAeronautics,Nanjing 210016,China);Numerical simulation of crack initiation trends during ECAP based on Normalized Cockcroft & Latham ductile fracture criterion[J];Forging & Stamping Technology;2010-05
2 ZHOU Zhi-ming1,CAO Min-min1,TANG Li-wen1,LIU Chun1,WANG Ya-ping2(1.Schcool of Material Science and Engineering,Chongqing University of Technology,Chongqing 400054,China;2.Schcool of Science,Xi'an Jiaotong University,Xi'an 710049,China);Microstructure and properties of cold rolled Cu_(88)Fe_(12) alloys[J];Forging & Stamping Technology;2010-06
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved