Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《REMOTE SENSING TECHNOLOGY AND APPLICATION》 2000-03
Add to Favorite Get Latest Update

Calculating the Position of Laser Points of Airborne 3D Image and It's Application

YOU Hong\|jian, LIU Shao\|chuang, LIU Tong, LI Shu\|kai (Institute of Remote Sensing Applications, The Chinese Academy of Sciences, Beijing 100101, China)  
Airborne 3D imager, which integrates global positioning system (GPS), attitude measurement unit (AMU), scanning laser range finder(SLR) and spectrum imager, is a new airborne remote sensing technology system. It can generate geo\|referenced image (orthographic image) without ground control points and it uses the laser points distributed in the image to rectify raw image. SLR and spectrum imager use the same optical system which ensure the image and laser point to be matched closely. The calculation of 3D position of laser point is the key to the 3D imager. According to geometry principle, the position of laser point can be determined if the space position of airplane is surveyed by GPS, the attitude of the airplane is surveyed by AMU and the range from air to ground is measured by SLR. In this paper the principle and data structure of 3D imager is introduced first, then the procedure of calculating the position of laser point is presented in detail based on the design principle of the imager. A processing example that is a part of flight test in South China is given in the end to verify the feasibility of the algorithm.
【Fund】: 国家 8 63计划 3 0 8主题支持项目!( 863 -3 0 8-12 -0 1( 1) )的一部分
【CateGory Index】: TP7
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved