Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Chinese Journal of Rock Mechanics and Engineering》 2008-06
Add to Favorite Get Latest Update


PENG Fangle1,2,BAI Xiaoyu1,YASIN S J M3,TATSUOKA Fumio 4(1.Department of Geotechnical Engineering,Tongji University,Shanghai 200092,China;2.Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education,Tongji University,Shanghai 200092,China;3.Department of Civil Engineering,Bangladesh University of Science and Engineering,Dhaka 1000,Bangladesh;4.Department of Civil Engineering,Tokyo University of Science,Chiba 278–8510,Japan)  
It is not simple to select the hardening parameter and function in the constitutive modeling of elastoplastic behavior for sandy soils due to the fact that there exists a clear effect of stress path on the deformation and strength of sandy soils.In order to better understand the above effect,a series of drained plane strain compression(PSC) tests along different stress paths are carried out on saturated dense specimens of sandy soil with precise stress and strain measurements.It is shown that all the strain increments(i.e.axial,lateral,shear and volumetric increments) are dependent on stress history and stress path.Therefore,the use of any quantity shown above as the hardening parameter that is independent of stress history and path in an elastoplastic model for sandy soil is not reasonable.Based on test results and precise data analysis,a unique modified plastic-work parameter and the related function,which are independent of stress path,are discovered.It is shown that using the modified plastic-work parameter and function as the hardening parameter and function that is independent of stress path in an elastoplastic model for sandy soil is consistent with theoretical assumption.By the comparison between the computational results and the experimental results,it can be seen that the effect of stress path on the deformation and strength of sandy soil could be successfully simulated by the elastoplastic model with the proposed modified plastic-work parameter and function.
【Fund】: 国家自然科学基金资助项目(50679056);; 教育部新世纪优秀人材支持计划基金项目(NCET–06–0378);; 上海市曙光计划项目(05SG25);; 教育部留学回国人员科研启动基金项目
【CateGory Index】: TU441.4
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved