Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Hydraulics Pneumatics & Seals》 2012-07
Add to Favorite Get Latest Update

Hydraulic Impact Simulation on the Progress of Descending Changing to Lifting Stroke in 300MN Hydraulic Press Based on AMESim and Simulink

LIU Jiang-ming1,TAN Jian-ping2,Huang Bo1,CHEN Hui2(1.Sany Heavy Industry Co.,Ltd.,Changsha 410100,China;2.School of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China)  
Hydraulic impact exists in each pipe of the hydraulic press.According to respective features of AMESim and Simulink,simulation model based on AMESim and controlling model based on Simulink were established.Co-simulation was realized by Co-Simulation interface.The progress of the velocity of moving beam firstly increasing and then decreasing during the cam angle increasing was analyzed.In addition,the hydraulic impact in the situation of descending stroke changing to lifting stroke was analyzed.Results shows that: in order to decrease the hydraulic impact of descending stroke changing to lifting stroke,to control cam angle less than the angle which makes the greatest velocity of moving beam is a good method,moreover,hydraulic impact weakens when the velocity of moving beam decreases.
【Fund】: 国家高技术研究发展计划(863计划)资助项目(2007A04Z417)
【CateGory Index】: TG315.4
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 6 Hits
1 CHEN Hongliang,LI Huacong(College of Propulsion and Energy,Northwestern Polytechnical University,Xi'an Shaanxi 710072,China);Research on Vibration Weakening of Electrohydraulic Servo System Based on the Technology of AMESim-Matlab/Simulink Co-simulation[J];Machine Tool & Hydraulics;2006-06
2 HUANG Chang-zheng1,ZHOU Liang2,TAN Jian-ping2(1.College of Information Engineering,Shaoguang Institute,Shaoguang 512005,China;2.School of Electro-Mechanical Engineering,Central-south University,Changsha 410083,China);Optimization design on valve-body of main distributor in the 300 MN mould forging hydraulic press[J];Journal of Machine Design;2007-05
3 ZHANG Hong-li (College of Electrical Engineering,Xinjiang University,Urumqi,Xinjiang 830008,China);Building of Complicated Non-linear Module in MATLAB[J];Journal of Xinjiang University (Natural Science Edition);2004-04
4 LU Ning, FU Yong-ling, SUN Xin-xue (School of automation science and electronic engineering, Beihang University, Beijing 100083, China);Application of Single Nero Controller in Hydraulic Servo System and Co-simulation of Electro-Hydraulic System[J];Journal of System Simulation;2006-11
5 HU Xue-fa, ZHAO Zhen, WANG Fu-li, HE Da-kuo (Key Laboratory of Process Industry Automation, Ministry of Education, Northeastern University, Shenyang 110004, China);Modeling and Simulating of Hydraulic Tube Tester's Main Hydraulic System[J];Journal of System Simulation;2008-18
6 PANG Zhenxu(Shanghai Jiaotong University,Shanghai,China) LI Congxin;Modeling and Simulation of High-Speed Hydraulic Press[J];China Mechanical Engineering;2002-10
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 XIA Qinxiang,PAN Dongsheng,QIU Hongyang,RUAN Feng(South China University of Technology,Guangzhou 510640,Guangdong China);The Application and Prospect of the Hydraulic Simulation Technology in the Forging Equipment[J];;2005-02
2 Gong Liwen1 Wang Jian2 Ji Jianjun3 Zhao Zhen4(1.Baoye Construction Corp.Ltd.,Shanghai 201900,China;2.Jining Institute of Technology,Jining 272000,China;3.Shanghai Kings-tech Co.Ltd,Shanghai 200940,China;4.Information Science and Engineering,Northeastern University,Shenyang 110004,China);Potential fault analysis of hydrostatic tester based on PSO-SCA[J];Journal of Electronic Measurement and Instrument;2009-08
3 JIN Xiao-xiong,XIAO Yong,LIN Yu-hui,ZHU Na(School of Automotive,Tongji University,Shanghai 201804,China);Study of air-spring-based semi-driving dynamic vibration absorber[J];Chinese Journal of Construction Machinery;2007-03
4 WANG Li~1,PENG Yong~2,WANG Yong-chao~1 (1.School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China, 2.North Automatic Control Technology Institute,Taiyuan 030006,China);Control of the Electrohydraulic System of a Certain Mine Sweeping Plough Based on Fuzzy Neural Network[J];Fire Control & Command Control;2012-04
5 HUANG Changzheng1,TAN Jianping2 (1.Department of Mechanical and Electrical Engineering,Shaoguan University,Shaoguan Guangdong 512005,China;2.School of Mechanical and Electrical Engineering,Central South University,Changsha Hunan 410083,China);Response Characteristic of Fluid Pressure in Operating Cylinder for 300MN Die Forging Hydraulic Press[J];Machine Tool & Hydraulics;2009-12
6 LI Xiaolong1,XIA Qinxiang1,ZHOU Sicong1,LIN Yehai2,YE Xiaozhou2(1.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou Guangdong510640,China;2.Zhongshan Jonjee Precision Machinery Co.Ltd,Zhongshan Guangdong 528400,China);Technology and Strategy of Electro-hydraulic Proportional Control and Its Application in the Forging Equipment[J];Machine Tool & Hydraulics;2010-11
7 CHEN Yu,DU Qungui,XIE Kai,HUANG Xiaodong(School of Mechanical & Automotive Engineering,South China University of Technology,Guangzhou Guangdong 510640,China);Design and Simulation of Hydraulic Test-bed for Tile Press[J];Machine Tool & Hydraulics;2010-17
8 WANG Li1,WANG Yongchao1,JIN Yong2(1.School of Mechanical Engineering,Nanjing University of Science and Technology, Nanjing Jiangsu 210014,China;2.Military Representative Office of the General Armaments Department in Wuhan Area,Wuhan Hubei 430073,China);Control of Electrohydraulic System Based on Generalized Dynamic Fuzzy Neural Network[J];Machine Tool & Hydraulics;2011-15
9 MAO Xiwang1,QIU Yafeng1,ZHAO Xiaojun2,CHANG Kui1(1.School of Mechanical Engineering,Nanjing University of Science and Technology, Nanjing Jiangsu 210094,China; 2.Nanjing Chenguang Group Co.,Ltd.,Nanjing Jiangsu 210006,China);The Piping Resonance Analysis of Ship-lift Hydraulic System[J];Machine Tool & Hydraulics;2012-03
10 ZHAO Jiong,HU Yu-jun,LU Dan-jun,PAN Shu-mei(School of Mechanical Engineering,Tongji University,Shanghai 201804,China);Optimization Design on the Large Cutter Support Plate in the Spreader of 2500t Ring Crane[J];Machine Design & Research;2012-03
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Zhao Hong (Department of Mechanical and Electronical Engineering, Beijing University of Petroleum, Beijing,102249) Zhao Shengdun Zhou Mingyong Luo Chuangang Lin Tingqi (Department of Mechanical and Electronical Engineering, Xi'an Jiaotong University);SLIDE POSITION CONTROL IN THE MECHANICAL PRESS[J];Acta Armamentarii;2004-02
2 ZHANG Zhengrong, et al;Structure of C-frame CNC turret press frame and it's effects on frame stiffness[J];Metalforming Machinery;2001-03
3 LI Ying(Mechanical Engineering Department Qinghua University,Beijing100084,China);Mechanics modeling & optimization Model JZ21 openback press frame[J];;2003-03
4 LIN Rui-quan, QIU Gong-wei (Department of Electrical Engineering, Fuzhou University, Fuzhou, Fujian 350002, China);Models and simulation of neuron PID applied in electric oven based on MATLAB language[J];Journal of Fuzhou University(Natural Sciences Edtion);2002-01
5 SHEN Zheng-shu, DU Guang-wei(Steel Tube Branch Company,Shanghai Baosteel Group Corporation,Shanghai 201900,China);Operation Principle of DEMAG Steel Tube HydrostaticTesting Machine and Fault Analysis[J];STEEL PIPE;2000-02
6 LI Yun-ji ZHANG Da-hai JIAO Sheng-jie (College of Mechanical Engineering,Chang'an University,Xi'an 710064,China);Study of the open circuit hydraulic system of asphalt spreader based on AMESim[J];Chinese Journal of Construction Machinery;2006-02
7 ;Cause of hydraulic impact and it's prevention[J];Construction Machinery and Equipment;1990-09
8 ;Hydraulic Variable Speed Drive System of Shield Disk Cutter[J];Construction Machinery and Equipment;2006-04
9 LUO Chuan-gang,ZHAO Hong,ZHOU Ming-yong,ZHAO Sheng-dun,LIN Ting-qi (Depart.of Mechtronical and Electronic Engineering, Xi'an Jiaotong University, Xi'an, 710049);Application of Iterative Learning Method in the Slide Position Control of Mechanical Press[J];Machine Tool & Hydraulics;2003-05
10 LI Jun-wei,ZHANG Lu-zou,ZHAO Yu-gang(Shandong University of Technology, Zibo 255012,China);Design of Hydraulic Servo System in Hydraulic Presser[J];Machine Tool & Hydraulics;2004-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved