Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Vibration,Measurement & Diagnosis》 2015-06
Add to Favorite Get Latest Update

Dynamic Characteristics Optimization for Whole Machine Tool Based on Energy Distribution

Deng Congying;Yin Guofu;Xiao Hong;Meng Zhaoyuxi;School of Manufacture Science and Engineering,Sichuan University;Chengdu Precise CNC Machine Tool Co.,Ltd;  
An optimized method for whole machine tool dynamic characteristics based on machine structure energy distribution is proposed after the finite element model(FEM)of a vertical machining center has been accurately established.The spring-damping system is adopted to establish the FEM with ANSYS to simulate the contact behaviors of its joint surface based on the identified joint stiffness and damping.Then,the modal characteristics and harmonic responses of the whole machine are analyzed.The FEM is verified to be accurate and the weak modes are obtained after comparing its results with that of the experiments.The elastic energy of the whole machine tool and the joints of these weak modes are calculated.The joints with a relatively high ratio of whole machine tool elastic energy are regarded as the weak joints.Finally,an optimized project based on the stiffness of these weak joints is proposed.The results show that the elastic energy ratio of each weak joint of the weak modes and the dynamic response amplitudes of the spindle tip decreases.Thus,the feasibility of this optimized method is verified with the improvement in the dynamic characteristics of the whole machine tool.
【Fund】: 国家科技重大专项资助项目(2013ZX04005-012);; 四川省科技支撑计划资助项目(2012GC0008)
【CateGory Index】: TG502
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 1 Hits
1 JIANG Shuyun ZHU Shulong (School of Mechanical Engineering,Southeast University,Nanjing 211189);Dynamic Characteristic Parameters of Linear Guideway Joint with Ball Screw[J];Journal of Mechanical Engineering;2010-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Wu Liangsheng ;Chen Weifu (School of Mechanical Engineering and Applied Electronic Technology, Beijing Polytechnic University, Beijing, 100022 );Calculation of Natural Freguencies and Vibration Models of Geared System Coupling Flexural and Torsional Vibrations[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-01
2 WANG Min, FBI Ren-yuan, YANG Jian-wu, WU Ji-mao, GUAN Jian, LIU Xuan ( 1. College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing 100022, China; 2. College of Environment and Energy Engineering,;Application of Varying Stiffness Method in Machining Chatter Control[J];Journal of Beijing Polytechnic University;2001-04
3 Huang Xudong; Fei Renyuan; Yang Jiahua (Department of Mechanical Engineering, Beijing Polytechnic University, 100022);Experimental Research of the Dynamic Behavior of Spindle Assembly[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1994-03
4 Zhang Yundian Pang Aifaag ( Department of Mechanical Engineering );DYNAMIC STABILITY OF VARIABLE FEED CUTTING PROCESSES, BEING SERIES 3 IN "RELIABLE CHIP BREAKING METHODS APPLICABIE IN CUTTING DUCTILE MATERIALS[J];Journal of Beijing Institute of Technology;1986-02
5 YANG Ming-ya,etc.(Anhui Vocational College of Press and Publishing,Hefei 230601,China);Dynamic analysis and optimization design of a NC machine tool bed based on finite element analysis[J];Journal of Changchun Institute of Technology(Natural Sciences Edition);2011-04
6 YE Jian,HE Boxia,BU Xiongzhu,ZHOU Yan,ZHU Yunpu(Dept.of Instrument Science and Technology,School of Mechanical Engineering,Nanjing University of Science,Nanjing 210094,China);Test Method of Dynamic Characteristic Parameters of Feeding Mechanism[J];Journal of Test and Measurement Technology;2011-03
7 LIU Fan-chuan(Southwest China Institute of Electronic Technology,Chengdu 610036,China);A Solution of Vibration Plane in Electronic Equipment Architecture[J];Telecommunication Engineering;2004-03
8 Jiang Zao;Wang Qiyi;Qian Weimin;Vibration Attenuation Due to Oil-Film Damping in Rolling Guideway Systems[J];JOURNAL OF NORTHEASTERN UNIVERSITY;1995-04
9 Wang Rende,Gao Guoli,Wang Qiyi;Machine Tool Chatter Suppressing Mechanism of Periodically Variable Speed Cutting[J];JOURNAL OF NORTHEASTERN UNIVERSITY;1996-05
10 Li Yupeng; Du Chongjie; (The College of Mechanical Engineering Yanshan University ,Qinhuangdao 066004) Wang Yaqiu (Hebei Unicom Company ,Shijiazhuang 050000);Research on Microfeed Stability of Barometric Pressure Semi-Suspension Circular-ways[J];Journal of Yanshan University;2001-02
【Secondary Citations】
Chinese Journal Full-text Database 7 Hits
1 LIU Yang,Li Jing-kui,ZHU Chun-xia,CAI Guang-qi(School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004,China.);Influence of Linear Rolling Guide Joint on Dynamic Behavior of NC Machine Tools[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2006-12
2 Mao Kuanming Li Bin Xie Bo Wei Yaoqiang(College of Mechanical Science and Engineering,Huazhong Universityof Science and Technology,Wuhan 430074,China);Dynamic modeling of the movable joint on rolling linear guide[J];Journal of Huazhong University of Science and Technology(Nature Science Edition);2008-08
3 XU Dan,LIU Qiang,YUAN Songmei(School of Mechanical Engineering and Automation,BeijingUniversity of Aeronautics and Astronautics,Beijing 100083,China);Research on Static Stiffness of Roller Guideway[J];Machine Tool & Hydraulics;2008-04
4 XU Dan,LIU Qiang (School of Mechanical Engineering and Automation,Beihang University,Beijing 100083,China);Dynamic Co-Simulation of NC machine tool based on machine joints modeling[J];Machinery Design & Manufacture;2008-03
5 Zhang Guangpeng Shi Wenhao Huang Yumei (Xi'an University of Technology);ANALYSYS METHOD OF DYNAMIC BEHAVIORS OF GUIDWAY JOINT AND ITS APPICATION IN MACHINE TOOLS DESIGN[J];Chinese Journal of Mechanical Engineering;2002-10
6 Wang Shijun Huang Yumei Zhao Jinjuan Zhang Guangpeng Wang Kai Xi’an University of Technology,Xi’an, 710048;Finite Element Analysis for Machine Tools[J];China Mechanical Engineering;2004-18
7 ZHANG Guang peng 1, WANG Hai li 1, HU Zhao yan 2, HU De jin 1 (1 Shanghai Jiao Tong University, Shanghai 200030,China; 2 Shanghai Medical Instrumentnation College,Shanghai 200093,China);The Analysis Method of Dynamic Behaviors of Guideway Joint Based on the Fundamental Parameters at Unit Joint Surface[J];Jiangsu Machine Building & Automation;2001-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved