Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Proceedings of the Csee》 2004-02
Add to Favorite Get Latest Update

SAPF CONTROL STRATEGY UNDER THE CONDITION OF NON-IDEAL SOURCE VOLTAGES

YOU Xiao-jie, LI Yong-dong, Victor Valouch, HAO Rui-xiang ( Department of Electrical Engineering, Tsinghua University, Beijing 100084, China; Institute of Electrical Engineering, Academy of Sciences of the Czech Republic, 182 02 Prague, Czech Department of Electrical Engineering, Hebei University of Techdogy, Tianjin 300130,China)  
This paper presents the accurate calculation approach of the compensating current reference of shunt active power filter (SAPF) under the unsymmetrical and non-sinusoidal supply voltage conditions. The proposed approach is based on the rotating coordinate transformations of three-phase voltages and currents and the projection of d-q current in the direction of d-q voltage. The resulting current reference equals to the difference between the instantaneous current of nonlinear load and its fundamental positive sequence active component. Used in the three-phase three-wire network, it can determine arbitrary single order harmonic current. Further, this paper reports the dead-beat current control for SAPF to track the current reference under the unsymmetrical and non-sinusoidal supply voltage conditions. Theoretical analysis, simulation and experimental results demonstrate the effectiveness of the proposed calculation and control approaches. Besides the control of SAPF, the proposed calculation and control approaches can be applied to the control of other types of active power filter.
【CateGory Index】: TN713
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved