Full-Text Search:
Home|About CNKI|User Service|中文
Add to Favorite Get Latest Update

Dynamic Surface Control for Boiler Steam Pressure of Fuel-steam Pressure System

CUI Zhiqiang1,LIU Jizhen2(1.China Power Investment Corporation,Science,Technology,Environmental Protecting and Information Department,Haidian District,Beijing 100033,China;2.North China Electric Power University,Automatic Department,Changping District,Beijing 102206,China)  
The boiler steam pressure is an important parameter reflecting the state of boiler operation.A novel dynamic surface control(DSC) method was proposed for fuel-steam pressure system and only the boiler steam pressure was used in the control system.The mathematical model of the fuel-steam pressure building through test data fitting was transferred into state equations.The observer was designed to estimate the unknown states by using only pressure signal.Dynamic surface controller was designed and the problem of "explosion of complexity" inherent existing in traditional backstepping approach was overcome by the addition of low pass filters.From Lyapunov stability analysis,it is shown that all signals of the closed-loop system are semi-globally uniformly bounded and the tracking error may be kept arbitrarily small by adjusting control parameters.Simulation results show that boiler steam pressure signal can track the desired signal rapidly,which validates the effectiveness of the control system.
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©CNKI All Rights Reserved