Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《CHINA MECHANICAL ENGINEERING》 1999-10
Add to Favorite Get Latest Update

Manufacturing Oriented Tolerance Design of Parallel Machine Tools

Ma Lin(Tianjin University,Tianjin,China) Huang Tian Wang Yang Ni Yanbing Zhang Shichang p 1114 1118  
Tolerance design plays an important role in error avoidance of parallel machine tools, which is primarily concerned with determination of the manufacturing tolerances of components and subassemblies for the specified pose accuracy in the overall workspace. In this paper, the methodology for error analysis and synthesis of a 3 DOF parallel machine tool are investigated. The statistic model is formulated, which describes the mapping relationship between the manufacturing errors of components and the volumetric error of the platform. The sensitivity analysis is implemented to find the sensitive error sources. A new approach for determining the manufacturing tolerances is presented, which allows the angular and linear tolerances to be maximized and properly balanced with respect to the same manufacturing accuracy level. The results have been successfully applied to the development of a prototype machine.
【Fund】: 国家自然科学基金;天津市“九五”重点科技攻关资助;教育部博士学科点专项基金;天津大学“211”工程资助
【CateGory Index】: TG650.213
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 Lin Chunshen Tang Xiaoqiang Wang Liping et al;Precision Design of Modular Parallel Kinematic Machines[J];Tool Engineering;2007-08
2 HOU Yu-lei1,KANG Kai-jia1,ZENG Da-xing1,YAO Jian-tao1,SUN Feng-long2,ZHAO Yong-sheng1(1.College of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,China;2.Baosteel Co.,Ltd.,Shanghai 201900,China);Novel pre-stressed six-component force sensor and its position and orientation error analysis[J];Optics and Precision Engineering;2008-07
3 Zhou shanzhong, Li Jia, Huang Tian (School of Mechanical Engineering, Tianjin University, tianjin 300072,China);Explore of Test Piece Design for Accuracy of Parallel Machine Tools[J];Machine Tool & Hydraulics;2002-06
4 QIN Yan-ming,ZHANG YI-tong,LU Ling,ZHAO Yong-sheng (Institute of Mechanical Engineering Yanshan University,Qinhuangdao 066004,China)P12;Accuracy Analysis of 5-UPS/PRPU 5-DOF Parallel Machine Tool[J];Machine Design and Research;2004-04
5 Kang Fang,Fan Jinwei(College of Mechanical Engineering,Beijing University of Technology,Beijing 100022);A Method for Manufacturing Accuracy Distribution and Optimization of a CNC Machine Tool[J];Mechanical Science and Technology for Aerospace Engineering;2008-05
6 PAN Fang-wei,DUAN Zhi-shan,HE Li-le,WANG Peng(School of Mechanical and Electrical Engineering,Xi'an University of Architectural Science and Technology,Xi'an 710055,China);Precision synthesis on novel 6DOF parallel robot based on fuzzy genetic algorithm[J];Journal of Machine Design;2006-09
7 Li Siwei Huang Tian (Jlanjin University) Derek Chetwynd David Whitehouse (University of Warwick, Coventry CV47AL, UK);ORIENTATION ACCURACY SYNTHESIS AND ASSEMBLY PROCESS DESIGN OF A3-DOF PARALLEL KINEMATIC MACHINE WITH PARALLELOGRAM STRUTS[J];Chinese Journal of Mechanical Engineering;2003-07
8 GAO Meng, LI Tiemin, ZHENG Haojun, WANG Jinsong(Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China);Compensation for joint manufacturing errors in parallel kinematic machines[J];Journal of Tsinghua University(Science and Technology);2003-05
9 XU Liju1,FAN Shouwen2,MA Yongmei1(1.School of Manufacturing Sci. and Eng.,Sichuan Univ.,Chengdu 610065,China;2.School of Electromechanical Eng.,Univ. of Electronic Sci. and Tech. of China,Chengdu 610054,China);Accuracy Modelling and Error Analysis for A New Type Parallel Machine Tool[J];Journal of Sichuan University (Engineering Science Edition);2003-04
10 DING Wenzheng1,ZHOU Minghu1,HUANG Xiaodiao2,HONG Rongjing2(1.Engineering Center of Advanced Manufacturing Technology,Nanjing Institute of Technology,Nanjing 211167,China;2.College of Mechanical and Power Engineering,Nanjing University of Technology,Nanjing 210009,China);Study on Accuracy Design of Multi-axis Machine Tools Oriented to Remanufacturing[J];Journal of Basic Science and Engineering;2007-04
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 FANG Yue fa,FANG Hai rong,MU Jian bin (College of Mechanical and Electrical Engineering, Northern Jiaotong University, Beijing 100044,China);Error Sensitive Index of Parallel Robots and Its Distribution in Workspace[J];JOURNAL OF NORTHERN JIAOTONG UNIVERSITY;2000-04
2 Zhang Guoyu; An Zhiyong; Zhang Congzhou; Li Chengzhi (Changchun Institute of Optics and Finc Mcchanies, Cbangchun, l3OO22)Gao Yujun(Cbangchun Institute of Optics and Fine Mechanics, Academia Sinica);A DIMENSION MEASURING SYSTEM USING SEMICONDUCTOR LASER[J];ACTA ARMAMENTARII;1997-02
3 CHEN Ji-qing,LAN Feng-chong (School of Automotive Engineering,South China University of Technology,Guangzhou 510641,Guangdong,China);Stiffness-oriented Optimization Methodology for Geometric Design of Virtual-axis Hexapod Machine[J];Acta Armamentarii;2006-01
4 XU Yi-hua, LIU De-zhong, FEI Ren-yuan, PAN Xin-wen( College of Mechanical Engineering and Applied Electronics Technology,Beijing Polytechnic University, Beijing 100022, China );Analysis on Mechanical Errors of 3-PTT Parallel Connection Micromanipulator[J];Journal of Beijing Polytechnic University;2002-02
5 Qiu Shiyu Jin Zhiying Zhang Qixian;MECHANICAL ERROR ANALYSIS OF SPATIAL SIX-BAR MECHANISMS AND MULTICRITERIA OPTIMUM SYNTHESIS FOR CONSIDERING TOLERANCES AND CLEARANCES[J];;1983-02
6 Chen Mingzhe Zhang Qixian;ERROR ANALYSES OF THE INDUSTRIAL ROBOTS[J];;1984-02
7 GUO Zu hua CHEN Wu yi CHEN Ding chang (Beijing University of Aeronautics and Astronautics, School of Mechanical Engineering and Automation);Simulation Analysis on Kinematics and Force of Hexapod[J];Journal of Beijing University of Aeronautics and Astronautics;2001-01
8 CHEN You dong CHEN Wu yi FAN Rui CHEN Ding chang(Beijing University of Aeronautics and Astronautics, School of Mechanical Engineering and Automation);Numerical Control System for Virtual Axis Tool Grinders and Conventional Tool Grinders[J];Journal of Beijing University of Aeronautics and Astronautics;2001-02
9 Zhang Guangyu Zhang Chongjun Zhao Xuezeng (Dept. of Mechanical Engineering and Automation, Harbin Institute of Technology, Harbin 150001, China);Gravity balance technique installed on six-freedom spacecraft docking test table[J];Journal of Beijing University of Aeronautics and Astronautics;2004-12
10 Bi Shusheng Zong Guanghua(Beijing University of Aeronautics and Astronautics,Dept. of Mechanical and Electrical Engineering);Accuracy Analysis of Micromanipulator[J];JOURNAL OF BEIJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS;1998-03
China Proceedings of conference Full-text Database 1 Hits
1 Liu Xin-Jun Wang Jinsong Mi Pu-Bo Wang Li-Ping Department of Precision Instruments, Tsinghua University, Beijing 100084 Department of Computer Science and Technology, Yanshan University, Qinhuangdao 066004;Geometric Description of the Maximum Inscribed Workspace for a DELTA Parallel Robot[A];[C];2001
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 HU Ming,TIAN Wen-yuan,CAI Guang-qi(School of Mechanical Engineering & Automation,Northeastern University,Shenyang 11004,China.);Position Error Analysis of Drive Rod Hinges on a Kind of 3-DOF Parallel Machine Tools[J];Journal of Northeastern University(Natural Science);2007-03
2 CHENG Xian-guo,ZHAO Heng-hua*(School of Mechanical Engineering,Liaoning University of Petroleum & Chemical Technology,Fushun Liaoning 113001,P.R.China);Kinematics Stimulation for Three-TPT Parallel Machine Tool Based on Matlab[J];Journal of Liaoning University of Petroleum & Chemical Technology;2008-01
3 XIE Shun-qiang1,2,YU Yue-qing1,ZHANG Lan-xia2,4,WANG Li-ping3,WANG Jin-song3,LONG Yun-jia4 (1.College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100022,China;2.Department of Mathematics and Physics,Hebei Normal University of Science and Technology,Qinhuangdao,Hebei 066604,China;3.Department of Precision Instruments and Mechanology,Tsinghua University,Beijing 100084,China;4.China Agricultural University,Beijing 100083,China);VIBRATION-CHARACTERISTIC SIMULATION OF A NOVEL HYBRID MACHINE TOOL[J];Engineering Mechanics;2007-11
4 WANG Xian ping, DAI Yi fan, LI Sheng yi (College of Mechatronics Engineering and Automation, National Univ. of Defense Thechnology, Changsha 410073,China);Decoupling Motion of Mechanism[J];Journal of National University of Defense Technology;2002-02
5 LI Yan,FAN Da-peng(College of Mechatronics Engineering and Automation,National Univ.of Defense Technology,Changsha 410073,China);Development of Pointing Error and Sensitivity Analysis of Opto-electrical Stabilization Mechanism[J];Journal of National University of Defense Technology;2008-01
6 CHENG Gang1,WAN Yong-jian2,GE Shi-rong1 ( 1. College of Mechanical and Electrical Engineering, China University of Mining and Technology, Xuzhou 221008, Jiangsu Province, China; 2. Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu 610209, China );Error Sensitivity of 3-RPS Symmetrical Parallel Supporting Structure[J];Opto-Electronic Engineering;2009-09
7 JIANG Yuan-yuan(School of Mechanical Engineering,Liaoning University of Petroleum & Chemical Technology,Fushun Liaoning 113001,P.R.China);Application of Pro/E in the New Entity Modeling on Parallel Machine Tools[J];Journal of Liaoning University of Petroleum & Chemical Technology;2009-04
8 Huang Rongying, Hu Lei, Liu Wenyong, Xu Yonggang(School of Mechanical Engineering and Automation, Beihang University, Beijing 100191 );Construction of the position and orientation error model of navigation robots for femoral neck surgery using matrix differential[J];Chinese High Technology Letters;2009-10
9 YU Ling-tao,SUN Li-ning,DU Zhi-jiang,CAI He-gao(Robotics Institute,Harbin Institute of Technology,Harbin 150001,China);Three planes method on measuring and compensation of parallel robot[J];Journal of Harbin Engineering University;2006-05
10 ZHAO Xue-man,NI Yan-bin,LI Li-xian(Mechanical department of Tianjin University, Tianjin 300072,China);Research of Assembling Technology for 3-HSS Parallel Machine[J];Machine Tool & Hydraulics;2004-02
China Proceedings of conference Full-text Database 2 Hits
1 HE Xiao-mei, DING Hong-sheng, FU Tie, SUN Hou-fang (School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing 100081, China);Review on Kinematic Calibration of Parallel Kinematic Machine[A];[C];2004
2 HE Xiao-mei,DING Hong-sheng,FU Tie,SUN Hou-fang (School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Review on Kinematic Calibration of Parallel Kinematic Machine[A];[C];2004
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved