Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Mechanical Engineering(中国机械工程)》 2008-10
Add to Favorite Get Latest Update

Development of Rapid Dynamics Modeling System of Machine Tool Based on PATRAN

Mao Kuanmin Ye Jun Li Bin Huazhong University of Science and Technology,Wuhan,430074  
Dynamics characteristics of joints in machine tool were studied,and the dynamics mathematical models of joints were created.A rapid dynamics modeling system of machine tool was constructed through PCL(PATRAN Command Language) on the basis of FEA software PATRAN,and the DMIG card was used to input the experimental data into the FEA software PATRAN.The theoretical model and experimental model of finite element were combined and the efficiency and precision of finite element model are advanced.
【Fund】: 国家863高技术研究发展计划资助项目(2005AA424224);; 国家重点基础研究发展计划资助项目(2005CB724101)
【CateGory Index】: TG502.3
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 GUO Tie-neng,YU Xue-li,LI Fu-ping,CAI Li-gang,GUO Dong-liang(College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100124,China);Modeling Study of the CNC Heavy-duty Gantry Machine Coupling With the Characteristics of the Joint Surfaces[J];北京工业大学学报;2013-03
2 GUAN Ying-jun,ZHAO Yang,REN Li-li,MU De-qiang(School of Mechatronic Engineering,Changchun University of Technology,Changchun 130012,China);Finite Element Analysis of XK2425/5L Five-axis Gantry Milling Machine Main Structure[J];组合机床与自动化加工技术;2010-12
3 XIONG Wanli,ZHONG Guofu,JI Zonghui (National Research Center for High Efficiency Grinding,Hunan University,Changsha 410082,CHN);Review on the Development of High Speed Precision Machine Tool Dynamics[J];制造技术与机床;2009-09
4 Li Jie Qin Yuying Zhao QiState Key Lab of Automobile Dynamic Simulation,Jilin University,Changchun,130025;A New Mathematical Modelling and Simulation Method for Vehicle Ride Comfort[J];中国机械工程;2009-13
【Citations】
Chinese Journal Full-text Database 3 Hits
1 WU Xiao Jian (Shandong University, Jinan 250061);A Method for Establishing Dynamic Model for Fixed Joints[J];机械科学与技术;2002-03
2 Yang Jiahua; Chen Weifu; Huang Xudong (School of Mechanical Engineering and Applied Electronic Techmology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083 );Research on Identification of the Structural Interface Parameter of Machine Tool Bed with Column[J];北京工业大学学报;1999-01
3 Zhang Yu Liao Baiyu(Department of Mechanical Engineering,Kunming University of Science and Technology,Kunming 650093);The Efficient Identification Method of Joint Parameters of Machine Tools[J];昆明理工大学学报;1998-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Deng Congying;Yin Guofu;Xiao Hong;Meng Zhaoyuxi;School of Manufacture Science and Engineering,Sichuan University;Chengdu Precise CNC Machine Tool Co.,Ltd;;Dynamic Characteristics Optimization for Whole Machine Tool Based on Energy Distribution[J];振动.测试与诊断;2015-06
2 CHEN Yanxiang;ZHAO Daxing;DING Guolong;ZHAO Di;Hubei University of Technology;;Dynamics Characteristic Research of Combination Column in Gear Grinding Machine[J];机床与液压;2015-13
3 LOU Jiang-lei;TANG Jin-yuan;State Key Laboratory of High-performance Complex Manufacturing,School of Mechanical and Electrical Engineering,Central South University;;A method of equivalent stiffness identification for bearing joint of a gearbox based on CAE/CAT/CAO[J];振动与冲击;2014-23
4 Yang Yong;Zhang Weimin;Chen Xiguang;College of Mechanical Engineering,Tongji University;Sino-German College,Tongji University;;Modeling and Parameter Identification of Linear Guideway in NC Machine Tool[J];农业机械学报;2014-07
5 LIU Jing-yan;Fushun Technician College;;The Research and Application of Dynamic Mechanics in the Finite Element Method Modeling of Machine Tool Structure[J];价值工程;2013-34
6 CHENG Qiang,LIU Xin-yu,ZHAO Yong-sheng,AN Guo-ping(College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100124,China);Identification of Dynamical Contact Parameters for Spindle-Tool Holder Interface Based on Frequency Response Functions[J];北京工业大学学报;2013-08
7 JIANG Zhuoda,HE Yongyi School of Mechatronics Engineering and Automation,Shanghai University,Shanghai 200072,CHN;Advances of research on the character of grinding chatter[J];制造技术与机床;2012-09
8 Mao Kuanmina,b Huang Xiaoleia,b Tian Hongliangb Li Binb(a School of Mechanical Science and Engineering;b State Key Laboratory of Digital Manufacturing Equipment and Technology,Huazhong University of Science and Technology,Wuhan 430074,China);Identifying dynamic parameters of fixed joints in machine tools and its fitting method[J];华中科技大学学报(自然科学版);2011-03
9 YE Liang,GAO Jian-he,TIAN Wan-ying,ZHAN Jun-yong(Sch of Mech Engin,Yangzhou Univ,Yangzhou 225009,China);Modal characteristics analysis of the laser cutting machine beam[J];扬州大学学报(自然科学版);2009-02
10 Mao Kuanming Li Bin Xie Bo Wei Yaoqiang(College of Mechanical Science and Engineering,Huazhong Universityof Science and Technology,Wuhan 430074,China);Dynamic modeling of the movable joint on rolling linear guide[J];华中科技大学学报(自然科学版);2008-08
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 YAO Yan-feng,LIU Qiang,WU Wen-jing (School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Dynamic simulation of a linear motor feed drive system based on rigid-flexible & electrical-mechanical coupling[J];振动与冲击;2011-01
2 WU Wenjing LIU Qiang (School of Mechanical Engineering and Automation,Beihang University,Beijing 100191 );Extended Transfer Matrix Method for Dynamic Modeling of Machine Tools[J];机械工程学报;2010-21
3 SI Guo-ning,YU Yue-qing,YANG Jian-xin(Beijing University of Technology,Beijing 100124,China);Finite Element Analysis of Multi-axis Synchronous Gantry Machining Center Main Structure[J];组合机床与自动化加工技术;2009-09
4 ZHONG Wei-hong1,XU Yan-shen2,LIN Han-yuan3(1.School of Mechanical Engineering,Tianjin University of Technology,Tianjin 300384;2.Key Laboratory for Advance Ceramics Processing and Machining Technology of Ministry of Education,Tianjin University,Tianjin 300072,China);Structural Optimized Design of Mould MC Bed Based on Finite Element Analysis[J];组合机床与自动化加工技术;2009-03
5 ZHAO Honglin DING Qingxin ZENG Ming LIU Xuejie (College of Electromechanical Engineering,China University of Petroleum,Beijing 102249);Theoretic Analysis on and Application of Behaviors of Machine Tool Joints[J];机械工程学报;2008-12
6 XIONG Wan-li1,L Lang1,YANG Xue-bing1,GAO Hang2(1.National Engineering Research Center for High Efficiency Grinding,Hunan University,Changsha 410082,China;2.Key Laboratory of Precision and Non-Traditional Machining of Ministry of Education,Dalian University of Technology,Dalian 116024,China);High-order harmonic vibration of motorized spindle caused by high-frequency converting current and the suppressing methods[J];振动工程学报;2008-06
7 CUI Zhi-qin, JING Yin-ping(School of Mechatronic Engineering, North University of China, Taiyuan 030051, China);Application of virtual material in joint surface of complex assembled structures[J];Journal of Central South University of Technology;2008-S2
8 Mao Kuanming Li Bin Xie Bo Wei Yaoqiang(College of Mechanical Science and Engineering,Huazhong Universityof Science and Technology,Wuhan 430074,China);Dynamic modeling of the movable joint on rolling linear guide[J];华中科技大学学报(自然科学版);2008-08
9 Mao Kuanmin Ye Jun Li Bin Huazhong University of Science and Technology,Wuhan,430074;Development of Rapid Dynamics Modeling System of Machine Tool Based on PATRAN[J];中国机械工程;2008-10
10 XU Dan1,LIU Qiang1,YUAN Song-mei1,LIU Jing-yi2(1.School of Mechanical Engineering and Automation,Beihang University,Beijing 100083;2.BMEI Co.,Ltd,Beijing 100027);DYNAMIC SIMULATION FOR A GANTRY MACHINING CENTER BEAM[J];振动与冲击;2008-02
【Secondary References】
Chinese Journal Full-text Database 8 Hits
1 Li Xiaohuo;He Yang;Jiao Li;Sha Yongdong;Li Ting;Liaoning Technical University;;Vertical Random Vibration Response and Optimization of Cutting Head Based on Parameter Identification[J];中国机械工程;2015-06
2 Ma Zhiwen;He Xiaocong;Yuan Shengwan;Dou Wei;Zhou Sen;Liu En;Faculty of Mechanical and Electronic Engineering,Kunming University of Science and Technology;Kunming Machine Tool Company Limited;;Overview of the research about dynamic performance of machine tool structure[J];现代制造工程;2014-12
3 Li Xiaozhou;Yang Shu;Yu Huadong;;Development and Finite Element Analysis of Laser-assisted Precision Micro Milling Machine[J];机械制造;2014-07
4 LI Xiao-zhou;YANG Shu;YU Hua-dong;XU Jin-kai;YU Zhan-jiang;ZHANG Xiang-hui;Electromechanical Engineering College,Changchun University of Science and Technology;;Finite Element Analysis of Laser-assisted Precision Micro-milling Machine Tool's Gantry Structure[J];组合机床与自动化加工技术;2014-06
5 DONG Xu,REN Guo-zhu(North China Institute of Aerospace Engineering,Langfang 065000,China);Finite Element Analysis and Processing of Thin-walled Aluminum Alloy Slender Shaft[J];煤矿机械;2013-07
6 DONG Xu1,LI Rui2,YANG Mo1(1.North China Institute of Aerospace Engineering,Lang fang 065000,China;2.Hebei University of Technology,Tianjin 300130,China);Dynamic Finite Element Analysis for the Three Degrees of Freedom Parallel Machine Tool[J];组合机床与自动化加工技术;2012-06
7 Zhang Yi Mo Xuhui Zhong Zhihua State Key Laboratory of Advanced Design & Manufacture for Vehicle Body, Hunan University,Changsha,410082;Study on Ride Comfort of a Rhombic Bus Based on MATLAB[J];中国机械工程;2012-07
8 HUANG Ye(Zhejiang Industry Polytechnic College,Shaoxing Zhejiang 312000,China);Research on Finite Element Analysis of Dynamics and Statics of Comb Box of Gill Machine[J];装备制造技术;2011-03
【Secondary Citations】
Chinese Journal Full-text Database 3 Hits
1 Yu Dejie(Hunan University);MODIFYING DYNAMICAL MODEL OF DAMPED STRUCTURES BY USING OF OPTIMIZATION TECHNIQUE[J];振动与冲击;1994-02
2 Hong Zhongyu;Zhou Qian(Shanghai Institute of Mechanical Engineering)(China Ship Scientific Research Center);IDENTIFICATION TECHNIQUE OF THE CONNECTING STIFFNESS FOR COMPLEX STRUCTURE USING OPTIMIZATION[J];振动与冲击;1994-01
3 Tong Zhongfang Zhang Jie (Zhejiang University);RESEARCH ON THE DYNAMIC CHARACTERISTIC AND ITS IDENTIFICATION OF THE JOINT BETWEEN COLUMN AND BED OF A MACHINING CENTER[J];振动与冲击;1992-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved