Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Mechanical Engineering》 2010-04
Add to Favorite Get Latest Update

Static Analysis and Improvement on Clutch Driven Plate Assembly

Wang Qingchun1 Fan Zijie2 Hou Yong3 1.Beijing Forestry University,Beijing,100083 2.State Key Laboratory of Automotive Safety and Energy,Tsinghua University,Beijing,100084 3.Dong Feng Motor Propeller Shaft Co. Ltd.,Suzhou,Jiangsu,215008  
The stiffness and strength of clutch driven plate assembly were experimentally and numerically studied,an improvement design on the stress concentration was given.First,a finite element model of clutch driven plate assembly was built,the stiffness and stress distribution were calculated;then the corresponding tests were performed,and the FE model was verified;finally,the improved design was given according to the FE calculation.The improved design can reduce the stress concentration and the structural mass.
【Fund】: 北京林业大学优秀青年教师科技创新专项计划资助项目(BLYX200907)
【CateGory Index】: U463.211
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 3 Hits
1 Deng Haijin; Bai Xingui; Xu Shian; Lu Jiqing (Tsinghua University, Beijing 100084,PRC);Development and Application of Cermet Friction Facing on Clutch Disc in Heavy Duty Truck[J];Materials For Mechanical Engineering;1997-03
2 Qiu Enchao et al;Analysis on Structure Strength and Topological Optimization for Metal Ceramic Clutch Driven Disk[J];Automobile Technology;2002-02
3 Xu Shian et al(9);Development of Metallo ceramic Clutch Driven Plate[J];AUTOMOBILE TECHNOLOGY;1996-10
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 He Dongxin, Wang Chengguo, Wang Haiqing(College of Material Science & Engineering, Shandong University, Jinan 250061);INVESTIGATION STATUS OF FRICTION MATERIALS FOR AUTOMOBILES[J];Engineering Plastics Application;2002-02
2 HOU Shu-zhan,QU Jin-yu,WEI Xiao-yan,LIU Da-quan School of Transport and Vehicle Engineering,Shandong University of Technology,Zibo 255049,China;Development of Magnetic Particle Clutch for Vehiches in China[J];Journal of Magnetic Materials and Devices;2008-01
3 Zhong Zhigang~ 1),2) , Deng Haijin~ 1) , Li Ming~ 1) , Li Dongsheng~ 2) 1) (Dept. Materials Sci.& Eng.,Tsinghua University,Beijing 100084) 2) (Baimtec Material Co.,Ltd.,Beijing 100095);Study on the Bond Strength between Cu-based Ceramet Friction Material and Steel Backing[J];Powder Metallurgy Technology;2002-03
4 ZHANG Wei-bo(School of Mechanical Engineering & Automation, Fuzhou University, Fuzhou 350002,China);Intelligent and optimal design for automobile diaphragm spring clutch[J];Chinese Journal of Construction Machinery;2007-01
5 ZHANG Feng nian Dong Feng Automotive Propeller Shaft Co.,Ltd.,Jiangsu Suzhou 215007;Using Monte Carlo Method(M-C) to Optimize the Design of Nonlinear Components[J];Drive System Technique;2009-03
6 YANG Yu-ping,YANG Fu-yuan,HE Hua(Department of Automotive engineering,Tsinghua University,Beijing 100084,China);APU Structure Design for Series Hybrid Power System[J];Vehicle Engine;2010-01
7 Xiao Shengfa,Song Lei (Dept.of Automotive Engineering,Hubei Automotive Industries Institute,Shiyan 442002,China);Research on the Electric Power-assisted Operation System of Clutch[J];Journal of Hubei Automotive Industries Institute;2008-03
8 CHEN Guo-jin,CHEN Chang,YAN Xiao-min,GONG You-pin(College of Mechanical Engineering,Hangzhou Dianzi University,Hangzhou 310018,China);Simulation research on engaging process of clutch based on ADAMS[J];Mechanical & Electrical Engineering Magazine;2008-05
9 CHEN Guo-jin,YAN Xiao-min,CHEN Chang,GONG You-ping(College of Mechanical Engineering,Hangzhou Dianzi University,Hangzhou 310018,China);Parameter modeling technology of automotive clutch based on secondary development of Pro/E[J];Mechanical & Electrical Engineering Magazine;2008-11
10 CHEN Guo-jin,YIN Xiao-liang,GONG You-ping,YIN Ling-peng(College of Mechanical Engineering,Hangzhou dianzi university,Hangzhou 310018,China);Coupling heat stress analysis of the friction disk in clutch[J];Mechanical & Electrical Engineering Magazine;2008-12
China Proceedings of conference Full-text Database 2 Hits
1 CHEN Yue, SHEN Bai-ling, ZHANG Yong-zhen, XING Jian-dong(Xi'an Jiaotong University, Xi'an 710049, Shanxi, China; Louyang Institute of Technology, Luoyang 471000, Henan, China);Investigation on Friction and Wear Characteristics of Cast Irons against Semi-metallic Friction Material[A];[C];2000
2 Liu Zhenzhong~(1,2) Zhao Lianyu~2 Liu Qingjian~1 Wang Taiyong~1 (1 School of Mechanical Engineer,Tianjin University Tianjin 300072 China; 2 School of Mechanical Engineer,Tianjin University of Technology Tianjin 300384 China);Measurement and Control System for car Clutch Cover Assembly Comprehensive Performance Test Rig[A];[C];2009
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 Cheng Gengdong;Zhang Dongxu(Research Institute of Engineering Mechanics,DUT);Topological optimization of plane elastic continuum with stress constraints[J];JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY;1995-01
2 Xu Shian et al(9);Development of Metallo ceramic Clutch Driven Plate[J];AUTOMOBILE TECHNOLOGY;1996-10
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved