Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Ceramics》 2015-06
Add to Favorite Get Latest Update

Effect of Milling Time on SiC Prepared by Acetylene Black and Silicon Powder

HAO Bin;Department of Environment and Chemical Engineering,Tangshan College;  
With acetylene black and silicon powder after different milling time as materials,silicon carbide powder was prepared by microwave sintering technology.The effects of milling time on the morphology,ratio surface area of reactant and XRD of production were studied.The experimental results showed that the milling could significantly promote the reaction between acetylene black and silicon powder.With the milling time increasing,the size of reactants was further refinement,and when the milling time is over 7 h,reactant ratio surface area did not change significantly; Milling had influences on the XRD of products.When the milling time was less than 7 h,the conversion rate of Si increased.When the milling time was over 7 h,the conversion rate of Si had no obvious change.
【Fund】: 国家重点实验室开放课题项目(2011Z-05);; 河北省高等学校科学技术研究项目(Z2014016)
【CateGory Index】: TQ174.61
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 10 Hits
1 Liu Xinkuan,Ma Mingliang,Zhou Jingen;EFFECTS OF HIGH ENERGY BALL MILLING ON AIN SNYTHESIS FROM Al2O3 BY CARBOTHERMAL REDUCTION NITRIDATION[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1999-03
2 WANG Fu,WANG Qiang,CAO Wen-bin,SUN Jia-lin(School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China);Microwave Synthesis of SiC Powders with Coke and Quartzite[J];Journal of Materials Engineering;2009-07
3 HAO Bin1,LIU Jinqiang1,WANG Fu2 (1 Department of Environmental and Chemical Engineering,Tangshan College,Tangshan 063000;2 High and New Technology Research and Transform Center of Tangshan of Academia Sinica,Tangshan 063000);Kinetic Analysis on SiC Prepared by Carbothermic Method[J];Materials Review;2012-S1
4 HAO Bin1,LIU Jian1,LIU Jin-qiang1,WANG Fu2(1.Department of Environtion and Chemical Engineering,Tangshan College,Tangshan 063000,China; 2.High and New Technology Research and Transform Center of Tangshan of Academia Sinica,Tangshan 063000,China);Effect factors on SiC prepared by micro-wave sintering[J];Transactions of Materials and Heat Treatment;2013-S1
5 HAO Bin1,LIU Jian1,LIU Jin-qiang1,WANG Fu2(1.Department of Environment and Chemical Engineering,Tangshan College,Tangshan 063000,China;2.High and New Technology Research and Transform Center of Tangshan of Academia Sinica,Tangshan 063000,China);Preparation of SiC whisker by microwave sintering[J];Transactions of Materials and Heat Treatment;2013-08
6 YANG Kun, YANG Yun, LIN Zhi-Ming, LI Jiang-Tao ( Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100080, China; Graduate University of the Chinese Academy of Sciences, Beijing 100049, China);Mechanical-Activation-Assisted Combustion Synthesis of SiC[J];Journal of Inorganic Materials;2007-02
7 LU Bin LIU Ji-Xuan ZHU Hua-Wei JIAO Xian-He(School of Materials Science and Engineering,Central South University,Changsha 410083,China);SiC Nanowires Synthesized by Microwave Heating[J];Journal of Inorganic Materials;2007-06
8 Shen Ming(Zhuzhou Cemented Carbide Works);INVESTIGATI0N ON SYNTHESIS ALN P0WDERS BY CARB0THERMAL REDUCTION AND NITRIDATION[J];CEMENTED CARBIDE;1999-01
9 CAO Liangzu;HU Jian;CAO Daming;School of Mechanical and Electrical Engineering Jingdezhen Ceramics Institute;School of Electric and Optical Engineering,Nanjing University of Science &.Technology;School of Information Science and Engineering,Southeast University;;Effects of Ball Milling Process and Composite Dopants on the Performance of (Zr,Sn)TiO_4 Microwave Dielectric Ceramics[J];China Ceramics;2014-03
10 ZHAO Ge;JIANG Xiangpin;School of Materials Science and Engineering,Jingdezhen Ceramic Institute;;Study on the Molten Salt Method of Using Distilled Water as Milling Medium and Synthesis of Strontium Bismuth Titanate[J];China Ceramics;2014-07
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 WANG Fuqiang,HAO Zhibiao,YAN Liansheng (Xi'an Aerospace Composites Research Institute,Xi'an 710025);Research on Manufacture Technology for SiC Nano-whiskers[J];Materials Review;2008-S2
2 Liu Xinkuan 1, Ma Mingliang 2, Xi Shengqi 2, Zhou Jingen 2, Wang Qudong 1, Ding Wenjiang 1 (1 Shanghai Jiaotong University, Shanghai 200030) (2 Xi'an Jiaotong University, Xi'an 710049);Mechanism of Mechanical Activation Synthesis of Aluminum Nitride[J];Rare Metal Materials and Engineering;2000-06
3 WANG Liu-yan,ZHANG Ning(Scientific Technology Research Center,Shenyang University,Shenyang 110044,China);CURRENT STATUS AND PROSPECT OF PREPARATION TECHNOLOGY OF NANOMETER ALUMINUM NITRIDE POWDER[J];Powder Metallurgy Industry;2008-03
4 Chen Guohua(Research Center for Materials Science and Engineering, Guilin University of Electronic Technology 541004);Application of Mechanochemistry in the Research of Ceramic Materials[J];;2003-06
5 ZHOU Zheng guang,LI Jin lian,CHEN Han_yuan (Department of Materials and Chemistry Engineering, Guilin Institute of Technology, Guilin 541004,China);Application of ball milling process in synthesis of composite materials[J];Journal of Guilin Institute of Technology;2002-02
6 LIU Xinkuan 1,MA Mingliang 2,ZHOU Jing′en 2,WANG Qudong 1,DING Wenjiang 1 (1.School of Materials Science and Engineering,Shanghai Jiaotong University,Shanghai,200030,China; 2.School of Materials Science and Engineering,Xi′an Jiaotong University,X;On Advancement of Carbothermal Reduction of Alumina by High Energy Ball Milling[J];JOURNAL OF FUNCTIONAL MATERIALS;2000-01
7 Liu Xinkuan 1,Ma Mingliang 2,Xi Shengqi 2,Zhou Jingen 2,Wang Qudong 1,Ding Wenjiang 1 (1. State Key Laboratory of Metal Matrix Composite, Shanghai Jiaotong University, Shanghai 200030; 2. School of Materials Science & Engineering, Xi′an Jiaotong;STUDY ON MECHANICAL ACTIVATION SYNTHESIS OF NANO-CRYSTAL ALUMINIUM NITRIDE[J];JOURNAL OF THE CHINESE CERAMIC SOCIETY;2000-05
8 QIU Junfu1,2,YANG Yun1,LI Jiangtao1 (1.Technical Institute of Physics and Chemistry,Chinese Academy of Sciences,Beijing 100190;2.Graduate University of the Chinese Academy of Sciences,Beijing 100049,China);SURFACE PRETREATMENT EFFECT ON FLOW PROPERTIES OF AQUEOUS SUSPENSION OF β-SiC POWDER SYNTHESIZED BY COMBUSTION[J];Journal of the Chinese Ceramic Society;2010-04
9 LIU Wei-ping(School of chemistry and environment engineering,Jiangsu teachers university of technology, Changzhou Jiangsu 213001,China);EFFECTS OF MECHANICAL ACTIVATION ON FINE COPPER POWDER PREPARED BY SLURRY ELECTROLYSIS[J];Powder Metallurgy Industry;2012-04
10 CHEN Jie;WANG Xiao-gang;School of Material Science and Engineering,Xi'an University of Science and Technology;;Variation Law of Temperature Field in Synthesis of SiC by Carbothermal Reduction Method[J];Bulletin of the Chinese Ceramic Society;2013-11
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Zhang Jinsong Cao Lihua Yang Yongjin Sheng Xuexun Sheng Zhixiang Xia Fei(Institute of Metal Research,Acadmia Sinica);The Development of the Key Techniques of Microwave Sintering[J];Materials Review;1994-02
2 SONG Yong-cai,LI Bing (Institute of Aerospace and Meterials Engineering,National University of Defence Technology,Changsha 410073,China);Preparation of Silicon Carbide Nanometer Powders by Organic-inorganic Blended Precursor[J];Journal of Materials Science and Engineering;2004-03
3 YANG Jian-feng, HOU Yu-dong, JIA Lin, ZHU Man-kang, YAN Hui ( School of Materials Science and Engineering, Beijing University of Technology, Beijing 100022, China );Synthesis of K_(0.5)Bi_(0.5)TiO_3 powders by molten salt method[J];Electronic Components and Materials;2007-11
4 CAO Liangzu1,CAO Daming2(1.Mechnical and Electronics Engineering School,Jingdezhen Ceramics Institute,Jingdezhen 333001,Jiangxi Province,China;2.Chien-Shiung Wu College,Southeast University,Nanjing 211100,China);Study on parameter measurement of microwave dielectric materials by the closed cavity method[J];Electronic Components and Materials;2011-12
5 XING Su li, WANG Jun, ZENG Jing cheng, XIAO Jia yu (College of Aerospace and Material Engineering, National Univ. of Defense Technology, Changsha 410073,China);The Effects of the Preparation of SiC by Sol-Gel[J];Journal of National University of Defense Technology;2002-02
6 LIN Dunmin, XIAO Dingquan, ZHU Jianguo, YU Ping, YAN Hongjian (Department of Materials Science, Sichuan University, Chengdu 610064,China);Review of the patents of lead-free piezoelectric ceramics in the past 20 years[J];Journal of Functional Materials;2003-03
7 CHEN Jiang-xi, HE Guo-mei, HE Xu-min,XIA Hai-ping(Department of Materials Science & Engineering,Xiamen University,Xiamen 361005,China);Development of polymer precursors to SiC ceramic fiber[J];Journal of Functional Materials;2004-06
8 Qiao Guanjun;Jin Zhihao Xian Jiaotong University;Techniques for Preparation of SiC Powder[J];Bulletin of the Chinese Ceramic Society;1993-03
9 Hao Hua (Department of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070) Liu Hanxing Ouyang Sixi (State Key Laboratory of Advanced Materials for Composite and Processing, Wuhan University of Technology, Wuhan 430070);Properties of Bismuth Layer Structure Materials and Their Modification[J];Bulletin of the Chinese Ceramic Society;2004-02
10 CAI Hairong, CHEN Daying, LI Jiangtao (Department of Inorganic Materials, University of Science and Technology Beijing, Beijing 100083);INVESTIGATION ON PROCESSING AND MECHENISM OF ULTRA-FINE SiC POWDER BY CHEMICAL STIMULATION COMBUSTION SYNTHESIS[J];Journal of The Chinese Ceramic Society;2002-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved