Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《MANUFACTURING TECHNOLOGY & MACHINE TOOL》 1998-09
Add to Favorite Get Latest Update

Optimum Identification Method to Predicate Interface Characteristic of Mechanical Structure System

Chen Weifu, et al(5)  
In order to develope the technology of calculating static and dynamic behavior of new product during its design period without prototype, an identification method for calculatinng interface characteristic of mechanical structure system is presented. The paper discusses an optimum algorithm, choosing the contact stiffness coefficients as design variables, aimming at minimizing the sum of squares of eigenfrequency differences between finite element modes and their corresponding experimental modes based on mode shape indentification. Corresponding software has been developed. Using the identified parameters from an interface sample composed of one base and two columns, the eigenfrequency of mechanical structure system has been calculated and their accuracy has been verified by testing.
【Fund】: 北京市自然科学基金
【CateGory Index】: TH161,TB114.2
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 Chen Weifu;Sun Jianguang; Fan Jinwei; Song Guorong; Wu Liangsheng (College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing, 100022 );Research on the Application of "Modal Force Method" Technique in Analyzing Dynamics Behavior of Machine Tools Structure System[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;2000-01
2 HE Yin-zhi, CHEN Wei-fu, FAN Yin-long, MA Chun-min ( College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing 100022, China );Analysis of the Dynamical Characteristics of Machine Tool's Small Pillar Model[J];Journal of Beijing Polytechnic University;2001-04
3 CHEN Xin(Southeast University,Nanjing,China) SUN Qinghong MAO Haijun CHEN Nan;Modeling and Correcting FEM with Contact Element for the Combined Surfaces of Grinder Bolts[J];China Mechanical Engineering;2001-05
4 Yie Weiqiang Yu Xianhai Yu Jianxiang(21);Research for contact rigidity of marine ME's base gasket[J];CHINA SHIPREPAIR;2000-04
【Citations】
Chinese Journal Full-text Database 2 Hits
1 Yu Dejie Song Jianwei Peng Zemin(Dept. of Mech. Engr., Tianjin University);IDENTIFICATION OF DYNAMIC PARAMETERS FOR COMPLEX STRUCTURE JOINTS[J];Journal of Mechanical Strength;1988-01
2 Tong Zhongfang Zhang Jie (Zhejiang University);RESEARCH ON THE DYNAMIC CHARACTERISTIC AND ITS IDENTIFICATION OF THE JOINT BETWEEN COLUMN AND BED OF A MACHINING CENTER[J];Journal of Vibration and Shock;1992-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Yang Jiahua; Chen Weifu; Huang Xudong (School of Mechanical Engineering and Applied Electronic Techmology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083 );Research on Identification of the Structural Interface Parameter of Machine Tool Bed with Column[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-01
2 Mao Kuanming Li Bin Xie Bo Wei Yaoqiang(College of Mechanical Science and Engineering,Huazhong Universityof Science and Technology,Wuhan 430074,China);Dynamic modeling of the movable joint on rolling linear guide[J];Journal of Huazhong University of Science and Technology(Nature Science Edition);2008-08
3 WANG Lie- long1,2, ZHU Zhuang- rui2, SUN Qing- hong2 ( 1.Dep. of Mechanical and Electrical Engineering, Chizhou Teachers College, Chizhou 247000, China; 2.Dep. of Mechanical Engineering, Southeast University, Nanjing 210096, China);Research on Identification of the Structural Interface Parameter of Machine Tool Orbit with Slip Mass[J];Mechanical Engineer;2006-09
4 MAO Jian,XIN Zhou(School of Mechanical and Electronical Engineering,Lanzhou University of Technology,Lanzhou 730050,China);Static and Dynamic Finite Element Analysis of the 2MK2250+150 High-grade Numerical Control Honing Machine Column[J];Machinery & Electronics;2011-11
5 ZHANG Xiang-yu,XIONG Ji,HAO Xin,LAI Ren-ming(School of Manufacture Science and Engineering,Sichuan University,Chengdu 610065,China);Vibration modes and optimal design of column[J];Journal of Xi'an University of Science and Technology;2008-04
6 Zhang Xiang-yu,Xiong Ji,Hao Xin,Lai Ren-ming(School of Manufacture Science and Engineering,Sichuan University,Chengdu 610065,CHN);Topological optimization of the slide of TH65100 processing center based on ANSYS[J];Modern Manufacturing Engineering;2008-02
7 Liu Xiaoping Xu Yanshen Peng Zemin Song Jianwei (Tianjin University);Identification the Dynamic Parameters of Structural Joint Via Experimental and Modal Analysis[J];Chinese Journal of Applied Mechanics;1993-04
8 WANG Li-hua, LUO Jian-ping, LIU Hong-bin, Huang Ya-yu(Faculty of Machinery and Electrical Engineering , Kunming University of Science and Technology, Kunming 650093, China);RESEARCH ON DYNAMIC CHARACTERISTICS OF KEY MACHINE JOINT SURFACES OF THE NUMERICALLY CONTROLED MILLING MACHINE[J];Journal of Vibration and Shock;2008-08
9 Cheng Xu;A Study on Dynamic Characteristics of the Joint Surfaces of Ball Screw Assembly[J];CHINA MECHANICAL ENGINEERING;1994-01
10 XU Kai-yuan1,XU Wu-bin1,ZHANG Hong-xian1,TANG Man-bin2(1.Department of Mechanical Engineering,Guangxi University of Technology,Liuzhou 545006,China;2.ZhengLing Group Co.,Ltd,Liuzhou Guangxi 545005,China);Research on Structure Analysis and Dynamic Design of VMC-1000 Vertical Machining Center Column[J];Modular Machine Tool & Automatic Manufacturing Technique;2010-04
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 QIN Wen jie (School of Vehicle and Transportation Engineering, Beijing Institute of Technology, Beijing 100081, China);MULTISIDED SYSTEM DYNAMIC ANALYSIS OF THE CRANKSHAFT VIBRATION RESPONSE IN I. C. ENGINES[J];Journal of Safety and Environment;2002-02
2 HU Yue-ming,QI Qi-feng,HAN Jia,YUAN Peng,WU Xin-sheng College of Automation Science and Engineering.South China University of Technology,Guangzhou 510640,China;High-Speed and High-Precision Image Recognition Algorithms of SMD-IC and Realizations[J];Semiconductor Technology;2005-11
3 Fang Yuefa\ Li Jianyong E Mingcheng (College of Mechanical and Electrical Engineering, Northern Jiaotong University, Beijing 100044);Identification of the Dynamic Coefficients of the Oil Film Journal Bearings Using Generalized Matrix Inversion Method[J];JOURNAL OF NORTHERN JIAOTONG UNIVERSITY;1999-01
4 LI Jun 1, MENG Hong 1, ZHANG Hong kang 1, GU Zhong li 2 (1 China North System Engineering Institute,Beijing 100089,China;2.School of Vehicle & Transportation Engineering,Beijing Institute of Technology,Beijing 100081,China);Research of Automobile Suspension Systems Dynamics Simulation[J];Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine;2001-04
5 Hu Rufu  Sun Qinghong  Chen Nan  (Dept. of Mechanisc Southeast University, Nanjing, 210096 ) (Ningbo College  );A STUDY ON INTEGRATED OPTIMAL DESIGN FOR A HIGH-PRECISION INTERNAL GRINDER[J];Acta Armamentarii;2003-02
6 Fei Renyuan Huang Xudong Yang Jiahua Song Guorong Yin Deyi Xing Juheng( Department of Mechanical Engineering );Experimental Research For Dynamic Parameter Determination of Spindle Assambly[J];Journal of Beijing Polytechnic University;1993-01
7 Yang Jiahua Huang Xudong Fei Renyuan Xing Juheng Song Guorong Yin Deyi( Department of Mechanical Engineering );Study on the Dynamic Behaviour of the Spindle System[J];Journal of Beijing Polytechnic University;1993-02
8 Yang Jiahua; Chen Weifu; Huang Xudong (School of Mechanical Engineering and Applied Electronic Techmology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083 );Research on Identification of the Structural Interface Parameter of Machine Tool Bed with Column[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-01
9 Fan Jinwei(School of Mechanic Engineering and Applied Electronics Technology,Beijing Polytechnic University, Beijing, 100022 );Volumetric Error Modelling Method for NC Machine Based on Multi-body System Kinematics[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-02
10 Chen Weifu;Sun Jianguang; Fan Jinwei; Song Guorong; Wu Liangsheng (College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing, 100022 );Research on the Application of "Modal Force Method" Technique in Analyzing Dynamics Behavior of Machine Tools Structure System[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;2000-01
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 Hu Rufu Sun Qinghong Chen Nan Chen Xin Mao Haijun (Department of Mechanics, Southeast University, Nanjing, 210096);A STUDY ON SOME KEY TECHNIQUES IN THE STRUCTURAL DYNAMICS OPTIMAL DESIGN OF A NC INTERNAL GRINDER[J];Acta Armamentarii;2003-01
2 Hu Rufu  Sun Qinghong  Chen Nan  (Dept. of Mechanisc Southeast University, Nanjing, 210096 ) (Ningbo College  );A STUDY ON INTEGRATED OPTIMAL DESIGN FOR A HIGH-PRECISION INTERNAL GRINDER[J];Acta Armamentarii;2003-02
3 Xing Tongkun; Ma Chunmin; Chen Weifu (College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing 100022 );On the Solution of Complex Linear Equations in the Modal Force Analysis on the Main Structure of Speed Machine Tool[J];Journal of Beijing Polytechnic University;2000-S1
4 HE Yin-zhi, CHEN Wei-fu, FAN Yin-long, MA Chun-min ( College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing 100022, China );Analysis of the Dynamical Characteristics of Machine Tool's Small Pillar Model[J];Journal of Beijing Polytechnic University;2001-04
5 HUANG Hong-wu, ZHAO Xiao-qing, MI Hai-qing,HE Bing (State Engineering Research Center for High Efficiency Grinding and Sharpening Technology, Hunan Univ, Changsha, Hunan 410082, China);The Whole Machine Modeling and Mode Analysis of Super-high Speed Surface Grinder Based on FEM[J];Journal of Hunan University (Natural Science);2005-04
6 Mao Kuanmina,b Huang Xiaoleia,b Tian Hongliangb Li Binb(a School of Mechanical Science and Engineering;b State Key Laboratory of Digital Manufacturing Equipment and Technology,Huazhong University of Science and Technology,Wuhan 430074,China);Identifying dynamic parameters of fixed joints in machine tools and its fitting method[J];Journal of Huazhong University of Science and Technology(Natural Science Edition);2011-03
7 Ge Jiaqi~1,Zhang Mansheng~(1,2),Zhang Ling~1,Wang Shu~1(1 China Aeronautical Project and Design Institute,Beijing 100011,China;2 Beijing Jiaotong University,Beijing 100044,China);Computation analysis and test research of the cable-net substructure-major steel structure exchange joint of the theatre of Henan Provincial Art Centre[J];Building Structure;2008-12
8 HU Bin 1,YE Hong-wu 2 (1.Dept. of Mechanical Engineering,Ningbo College for Professional Training,Ningbo 310016,China; 2.Ningbo College for Garments and Technics,China);Virtual Manufacturing Technology and Machine Tool CAD/CAM[J];Machine Tool & Hydraulics;2003-04
9 WANG Xue-lin,XU Min,HU Yu-jin (School of Mechanical Science & Engineering,Huazhong University of Science & Technology,Wuhan 430074,China);Finite Element Analysis of the Modal of Machine Tool[J];Machine Tool & Hydraulics;2005-02
10 WANG Lielong1,2,WU Xiuhai2(1.Dep.of Mechanical and Electrical Engineering,Chizhou Teachers College,Chizhou Anhui 247000,China;2.Dep.of Mechanical Engineering,Southeast University,Nanjing 210096,China);The Influence Additional Mass on Dynamic Characteristic of Machine Tool Structure[J];Machine Tool & Hydraulics;2007-03
China Proceedings of conference Full-text Database 1 Hits
1 Zhu Pingyu Jiang Lingli Bin Guangfu (Hunan Province Key Lab of Health Maintenance for Mechanical Equipment,Hunan University of Science and Technology,Xiangtan Hunan 411201,China;Experimental Research on the Dynamic Characteristic of Super-high Speed Plane Grinder[A];[C];2007
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved