Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Chinese Journal of Rare Metals》 2001-04
Add to Favorite Get Latest Update

Bonding Mechanism of Cu/Steel Clad Sheet in Asymmetrical Rolling of Bimetal

Wei Wei and Shi Qingnan (Department of Materials Science and Engineering,Kunming University of Science and Technology,Kunming 650093,China)  
The influence of the asymmetrical rolling technique of Cu/steel clad sheet on the morphology of the interface after rolling was investigated. A study on the interface composition variation in asymmetrical rolling of clad sheet was made with TEM. The result showed that the morphology of the interface mostly depends on total reduction and annealing temperature. The bonding mechanism of asymmetrical rolling is distinct from that of rolling cladding at room temperature.
【Fund】: 云南省应用基础研究基金资助项目 (No .95E0 0 2 6M)
【CateGory Index】: TG335.85
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 TIAN Ya-qin~1,QIN Jian-ping~1,LI Xiao-hong~2(1.Taiyuan University of Science and Technology,Taiyuan 030024,China;2.Institute No.210,CNGC,Beijing 100089,China);Current State and Trend of Metal Clad Sheet Manufacture Technology[J];Development and Application of Materials;2006-01
2 LIU Hai-chang,WANG Jian-chun,LIU Kang-qiang,ZHANG Hong-yue (College of Machinery and Automation,Wuhan University of Science and Technology,Wuhan 430081,Hubei,China);Compounding Techniques of Cold-Rolled Composite Steels[J];Journal of Iron and Steel Research;2007-08
3 WANG Hai-shan,WANG Zhi-fa,JIANG Guo-sheng,XIAO Xue-zhang,MO Wen-jian (School of Material Science and Engineering,Central South University,Changsha Hu'nan 410083,China);Effect of Annealing Temperatures on the Properties of Roll-Bonding Cu/Mo/Cu Electronic Packaging Composites[J];Heat Treatment of Metals;2004-05
4 WANG Jun-li,SHI Qing-nan,QIAN Tian-cai,WANG Shao-hua,YANG Xi-kun(Research Center for Analysis and Measurement,Kunming University of science and Technology,Kunming 650093,China);Ultra-Fine-Grained Copper with High Strength and Conductivity Fabricated by Severe Deformation of Asymmetrical Accumulative Roll Bonding[J];Journal of Aeronautical Materials;2010-03
5 LIU Halchang~1 ZHANG Hongyue~1 WANG Jianchun~1 LI Pingsheng~2 LIU Kangqiang~1 XU Pan~1 (1.College of Machinery and Automation,Wuhan University of Science and Technology,Wuhan 430081,China; 2.College of material and metallurgy,Wuhan University of Science and Technology,Wuhan 430081,China);Experiment Study on Heat Treatment Techniques for Cold Rolling Steel Matrix Composites[J];New Technology & New Process;2007-06
6 Liu Haichang,Zhang Hongyue,Wang Jianchun,Liu Kangqiang(College of Machinery and Automation,Wuhan University of Science and Technology,Wuhan 430081,China);Post-rolling diffused heat treatment of steel-copper matrix composites[J];Journal of Wuhan University of Science and Technology(Natural Science Edition);2007-02
7 YAN Hong (Yunnan Metallurgy Research and Design Institute,Kunming,Yunnan 650031,China);2001 Annual Review of Metal Materials and Their processing in Yunnan[J];Yunnan Metallurgy;2002-02
8 WANG Hua(College of Material Science and Engineering,Shanxi University of Technology,Hanzhong Shanxi 723003,China);Bimetal composite of Copper and Steel Continuous Casting and Rolling Technology and Equipment[J];Research Studies on Foundry Equipment;2008-03
9 Jiang Guosheng~*, Wang Zhifa, He Ping, Wang Haishan (School of Materials, Central South University, Changsha 100083, China);Effect of Processing of Surface-Treatment on Shear Strength of Interface of Cu/Mo/Cu Composite[J];Chinese Journal of Rare Metals;2005-01
10 LI Bao-mian,XU Guang-ming,CUI Jian-zhong(The Key Laboratory of Electromagnetic Processing of Materials,Ministry of Education,Northeastern University,Shenyang 110004,China);Production of H90-steel-H90 clad coil by inversion solidification[J];The Chinese Journal of Nonferrous Metals;2007-04
China Proceedings of conference Full-text Database 1 Hits
1 ;轧制工艺在金属复合板复合中的应用[A];[C];2007
【Citations】
Chinese Journal Full-text Database 2 Hits
1 YU Jiuming;YU Changsheng;QI Kemin;ZHU Quan(Northeastern Universitv);BONDING MECHANISM OF STEEL-Al CLAD PLATE BY ROLLING AT DIFFERENT TEMPERATURE[J];IRON AND STEEL;1995-08
2 Zhang Shenghua;Guo Zujun(Department of Materials Science and Engineering,Central South University of Technology,Changsha,410083,China);BONDING MECHANISM OF THE BOUNDARY SURFACE OF Al/Cu ROLLING CLAD SHEET[J];;1995-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Fu Dingfa, Non-equilibrium institute of Central South University of Technology, Changsha, 410083., Ning Honglong, Chen Zhenhua;SPRAY DEPOSITION TECHNOLOGY AND PREPARATION OF BI-METALS[J];Ordnance Material Science and Engineering;2001-01
2 XURongchang, TANG Di, REN Xueping, WEN Yonghong, WANG Xiaohong, WANG Yaoqi National Engineering Research Center for Advanced Rolling Technology, University of Science and Technology of Beijing, Beijing 100083, China Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024, China;Improvment of the quality and mechanical properties of a plain carbon steel by accumulative roll-bonding[J];Journal of University of Science and Technology Beijing;2005-04
3 LIU Yong~1,WANG Ying~2,CHEN Wei~3,KANG Bu-xi~1 (1.Henan University of Sci. & Tech., Luoyang 471003, China; 2.Luoyang College of Technology, Luoyang 471003, China; 3.Luoyang Ship Material Research Institute, Luoyang 471039, China);Sintering Procedure and Properties of Mining Used Bimetal Shaft Sleeve[J];Development and Application of Materials;2004-01
4 TIAN Ya-qin~1,QIN Jian-ping~1,LI Xiao-hong~2(1.Taiyuan University of Science and Technology,Taiyuan 030024,China;2.Institute No.210,CNGC,Beijing 100089,China);Current State and Trend of Metal Clad Sheet Manufacture Technology[J];Development and Application of Materials;2006-01
5 YU Jiu ming, LI He zong, HUANG Su xia (The State Key Laboratory of Rolling Technology and Automation, Northeastern University, Shenyang 110004, China.;Effect of a Bonding Assistant Coat on Stainless Steel/Aluminum Complex Sheets Produced by Moderate Temperature Rolling[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2002-06
6 ZU Guoyin, YU Jiuming, WEN Jinglinern University, Shenyang 110004, China. );Effect of Interlayer on Interfacial Bonding Properties of Stainless Clad Sheets[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2003-11
7 YUAN Ge-cheng~1, ZHU Zhao-hua~2, HU Wen-tao~2, LIANG Hui-dong~2, YIN De-yan~2, LI Zuo-jian~1 (1. Guangdong University of Technology, Guangzhou 510090, China; 2. Guangzhou Aluminum Fabrication Plant, Guangzhou 510000, China);Effect of Temperature on Rolling Bond Behaviors of Laminated Stainless Steel/Al/Stainless Steel Composites[J];Materials For Mechanical Engineering;2004-02
8 HUANG Su xia 1 ,LI He zong 1 ,YU Jiu ming 2 (1.Dept. of Mechanical Engineering, HIAST, Handan 056038, China;2. The State Key Laboratory of Rolling Technology and Automation, Northeastern University, Shenyang, 110004, China);A study on the bonding strength and the elongation of stainless steel/aluminum complex sheet[J];Journal of Hebei Institute of Architectural Science and Technology;2002-04
9 MA Zhi-xin,LI De-fu,HU Jie,LI Yan-li,LI Hui (Beijing General Research Institute for Nonferrous Metals,Beijing 100088,China);TA1/LY12 Plate Manufactured by Pack Rolling Clad[J];Metal Forming Technology;2004-01
10 WANG Hai-shan,WANG Zhi-fa,JIANG Guo-sheng,XIAO Xue-zhang,MO Wen-jian (School of Material Science and Engineering,Central South University,Changsha Hu'nan 410083,China);Effect of Annealing Temperatures on the Properties of Roll-Bonding Cu/Mo/Cu Electronic Packaging Composites[J];Heat Treatment of Metals;2004-05
China Proceedings of conference Full-text Database 1 Hits
1 ;轧制工艺在金属复合板复合中的应用[A];[C];2007
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Chen Keqiao; Zhang Shuhong; Zhang Daiming; Li Shiyun and Li Jianyun(Kunming University of Science and Technology, Kunming 650093 );Studing Advance and New Techniques Review of Metal Composites[J];SICHUAN NONFERROUS METALS;2000-02
2 Zhao Lin(AISC Technology Centre)Bai Guangrun(Northeastern University);Exprimental Study of Axial Force Caused by Asynchronous-cross Rolling[J];;1997-04
3 Tian Shu (AISC Design and Research lnstitute);Development and Application on 55%Al-Zn Coating Plate[J];;2000-02
4 Xu Qiushi Tang Fulin Xu Shouguo (AISC International Trade Co.) (AISC Technology Centre) (Yanshan University);Derivation of Rolling Force Equation on Asynohronous Single stand Continous Rolling Mill[J];;1998-12
5 WANG Zhen-min, SONG Ren-bo, Li Ji-guang (School of Materials Science and Engineering, Anshan University of Science and Technology, Anshan 114044, China);Study of direct rolling and forming technology of semi-solid steel materials[J];Journal of Anshan University of Science and Technology;2003-01
6 JU Dong-ying, ZHAO Hong-yang, HU Lin, ZHAO Lian-gang, DUAN Zhen-hu (Dept. of Mechanical Engineering, Saitama Institute of Technology, Japan; School of Materials Science and Engineering, Anshan University of Science and Technology,Anshan 114044,China);Progress of twin-roll strip roll casting technology[J];Journal of Anshan University of Science and Technology;2003-03
7 Fu Dingfa, Non-equilibrium institute of Central South University of Technology, Changsha, 410083., Ning Honglong, Chen Zhenhua;SPRAY DEPOSITION TECHNOLOGY AND PREPARATION OF BI-METALS[J];Ordnance Material Science and Engineering;2001-01
8 Liu Zhengchun, Wang Zhifa, Jiang Guosheng;ADVANCES IN METAL-MATRIX MATERIAL FOR ELECTRONIC PACKAGING[J];Ordnance Material Science and Engineering;2001-02
9 WANG Qing-pu,ZHANG De-heng (Faculty of Physics and Microelectronics,Shandong University,Jinan 250100,China) YU Yong-qin,HUANG Bo-biao (Institute of Crystallite Materials,Shandong University,Jinan 250100,China);Light emitting characteristic of ZnO thin films[J];Semiconductor Information;2001-04
10 Liang Chunguang, Zhang Ji(13th Inetitute of Ministry of Electronic Industry, Shijiazhuang\ 050051);GaN Dawn of 3rd Generation Semiconductors[J];CHINESE JOURNAL OF SEMICONDUCTORS;1999-02
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 ZHAO Zheng,TAO Gang (College of Power Engineering,Nanjing University of Science &Technology,Nanjing 210094,China);Explosive Compaction-Spray Technology for Preparation of Double Metal Clad Plate[J];Development and Application of Materials;2008-05
2 HAN Sheng-li,SONG Yue-qing,CUI Shun,XIA Yang,ZHOU Zeng-ling,LI Ming (Beijing General Research Institute for Nonferrous Metals,100088,China);RESEARCH AND DEVELOPMENT OF Mo-Cu ALLOY[J];Powder Metallurgy Industry;2007-05
3 YU Xin,LIU De-yi,CHEN Ru-shu,LIU Shi-cheng(School of Materials Science and Engineering,Dalian Jiaotong University,Dalian 116028,China);Microstructure and Mechanical Properties of Diffusion Bonded Joints Between Carbon Steel and Titanium with Copper Interlayer[J];Journal of Dalian Jiaotong University;2009-06
4 ZHAO Feng1,LI Xuan-ming2,WANG Hu-nian1(1.Xi`an Tianli Clad Metal Co.Ltd.,Xi`an 710054,China;2.Northwest Institute for Nonferrous Metal Research,Xi`an 710016,China);The Bonding Propriety of the Explode-Rolled Ti/Steel Clad Metal[J];Development and Application of Materials;2010-01
5 YANG Dong,LIU Bo (Laiwu Iron & Steel Co.Ltd.,Laiwu 271104,China);Summaries for Treatment Method of Clad Plate Rolling Interface[J];Gansu Metallurgy;2010-02
6 LI Peng-zhi1,XING Shu-ming2 (1.Shijiazhuang Vocational Technology College,Shijiazhuang 050081,China;2.Mechanical Electronic and Control Engineering College,Beijing Traffic University,Beijing 100044,China);Research Progress on Bimetals Compound Technology of Abrasion Resistant Workpieces[J];Coal Mine Machinery;2008-07
7 GUO Shi-bo,KANG Qi-ping (College of Electromechanical Engineering,Hunan University of Science and Technology,Xiangtan 411201,Hunan,China);Research on Preparation of Mo-Cu Composites by Mechanical Alloying[J];Mining and Metallurgical Engineering;2009-04
8 DONG Cheng-wen1 REN Xue-ping3(Department of Material Science and Engineering,University of Science and Technology,Beijing 100083 China)LI Yan-fang2(Capital Engineering and Research Incorporation Limited,Beijing 100176 China)MA Zu-nan4(Radio,Film and Television Design and Research Institute,Beijing 100045 China);Study of circulated phase transformation under slight pressure when manufacturing TA1/Q235 clad plate with ARB skills[J];Journal of Plasticity Engineering;2008-03
9 DONG Cheng-wen1 YUAN Qing-hua2 REN Xue-ping4(Department of Material Science and Engineering,University of Science and Technology Beijing,Beijing 100083 China)LI Yan-fang3(Capital Engineering and Research Incorporation Limited,Beijing 100176 China);Study of the TA1/Q235 clad plate's interface structure and bonding characteristics[J];Journal of Plasticity Engineering;2009-03
10 Liu Ding (School of Materials Science and Engineering,Dalian University of Technology,Dalian,China);Preparation of 3003/4004 Cladding Materials by Semi-continuous Casting[J];Special Casting & Nonferrous Alloys;2010-05
China Proceedings of conference Full-text Database 2 Hits
1 LI Yin-e MA Guang LIU Xiao-feng BAI Wen-chao JIANG Ting (Northwest Institute for Non-ferrous Metal Research,Xi'an 710016,China);The study of steel/copper composite wire[A];[C];2007
2 LI Jun WANG Tong-min LI Ting-ju CAI Shao-wu XU Jin-gjing CAO Zhi-qiang (School of Materials Science and Engineering,Dalian University of Technology,Dalian 116024);STUDY ON CLADDING METALS PREPARATION UNDER DIRECT CURRENT MAGNETIC FIELD[A];[C];2008
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 Yan Xuebai, Li Zhenghua Li Xuanming, Gao Wen zhu (Northwest Institute for Nonferrous Metal Research) Zhu Quan (Northeast University of Technology);Effect of Rolling Parameters on the Bonding Strength and Morphology of the Peeled Surface of Ti/Al Clad Sheet[J];Rare Metal Materials and Engineering;1991-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved