Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Chinese Journal of Rare Metals》 2004-01
Add to Favorite Get Latest Update

Study on Spinning Properties of Titanium Alloy

Mao Baiping *, Wang Fachun, Zhao Yunhao, Shen Jian (Research Central for Non ferrous Metals Processing, General Research Institute for Non ferrous Metals, Beijing 100088, China)  
Titanium alloy exhibits the property of high strength to rigidity. It provides potentiality to replace aluminum alloy and alloy steel. Generally, it is difficult to spin titanium alloy at room temperature, because of its high deformation resistance and yield to tensile ratio. In this paper the feasibility of tube spinning titanium alloy was analyzed based on the experimental results of hot compressive deformation test. The results show that the proper spinning temperature of this alloy is about 650~750 ℃. The feed rate and rotating speed should be determined by each technical step since it is not strain rate sensitive material.
【CateGory Index】: TG376
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 3 Hits
1 ;FEM Simulation and Experiment on Spinning Process of Titanium Alloy Wheel Rim[J];Aeronautical Manufacturing Technology;2010-05
2 HE Wei-jun1,SONG Hong-wu1,2,CHANG Hai-ping 2,LI Chang-hai2,ZHANG Shi-hong1(1.Institute of Metal Research Chinese Academy of Sciences,Shenyang 110016,China;2.Citic Dicastal Wheel Manufacture Co.,Ltd.,Qinhuangdao 066003,China);Numerical Simulation and Process Optimization of Hot Spinning Process for Cast-spinning Wheel[J];Journal of Netshape Forming Engineering;2011-02
3 YANG He, WU Chuan, LI Hongwei, FAN Xiaoguang, ZHANG Dawei, JI Zhe (State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi′an 710072, China);Review on Development of Key Technologies in Plastic Forming of Titanium Alloy[J];Materials China;2011-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Ai - rong (Craftsmen School, Anyang 455000, China);Application of Spinning Forming to Production of Constant Magnetic Motors[J];Journal of Anyang University;2004-04
2 CHU Liang, LU Xian - feng, ZHANG Chao - ge (School of Mechanical & Electrical Engineering, Nanchang University, Nanchang Jiangxi 330029, China);The calculation and precision comparison of necking deformation pressure[J];Ordnance Material Science and Engineering;2004-05
3 Yin Jiyig(Department of Engineering);The Force for The Plastic Deformation of One End of Round Bar Between the Dies with Dip Angle[J];Journal of North China University of Technology;1988-02
4 LUO Jin liang 1, LI Jian guo 2 (1 Beijing MONROE Automobile Shock Absorber Co,Ltd,Beijing 100055,China;2 Shock Absorber Inspection Station of China North Vehicle Research Institute,Beijing 100071,China);The Technique & Equipment of Planet-type Spin Doming of Shock Absorber[J];;2000-01
5 Wu Ying (Beijing Institute of Technology) Zhu Mingwu (Nanjing University of Science & Technology);CALCULATION OF THE STATIC AND DYNAMIC CHARACTERISTICS OF PRESSURE-MEASURING CYLINDERS[J];Acta Armamentarii;1993-04
6 FAN Bailing, YAN Guoan, GUAN Kezhi, LIU Lin, HUANG Yongjian (Mechanical Engineering School,UST Beijing, Binjing 100083,China) (Shijiazhuang Iron and Steel Co.Ltd, Shijiazhuang 050031,China) (Techonlogy Developing Co. Ltd, UST Beijing, Beijing 100083, Chin;Flow Stress Mathematical Models of Stainless at Hot Deformation[J];Journal of University of Science and Technology Beijing;2002-03
7 YANG Bin, HUAN Zanjun, ZHANG Jishang, YUAN Shijian, ZHANG Yuebin, CAO Fuyang State Key Lab for Adv Met Mater, University of Science and Technology Beijing, Beijing 100083, China National Key Lab of Precision Hot Processing of Metals, Harbin Institute of Technology, Harbin 150001, China;Microstructure and Tensile Properties of TiC/Ti-5Mo-5V-2Cr-3Al Composites Prepared by Melt In-situ Reaction Spray Forming[J];Journal of University of Science and Technology Beijing;2003-04
8 LIU Bo~1,HUANG Xiao-yan~2 (1.Zhenjiang College;2.ZhenJiang University of ship and boat Technology,Zhenjiang 212003,China);Analysis of Special Technology for Rolling Half-shaft Casing[J];Journal of Benxi College of Metallurgy;2003-04
9 ;The Optimum Taper Angle of Intaglio Mould When Two-piece Cans Thinned and Drawn[J];PACKAGING AND FOOD MACHINERY;1998-03
10 PENG Cheng-yun, DENG Ming, LE Jing-gang (Department of Material Engineering, Chongqing Institute of Technology, Chongqing 400050, China);Mechanical Analysis on the Small-hole Punching in Thick Board[J];Journal of Chongqing Institute of Technology Management;2001-05
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 FAN Ailing,TIAN Wenhuai,HU Shilian,ZHOU Dengling,SUN Qi Correspondent:FAN Ailing,Beijing University of Science and Technology,Beijing,100083,China;Study of microstructures and textures of electroformed and rotary-pressed shaped charge liners[J];Ordnance Material Science and Engineering;2001-05
2 WANG Zhan-guo(Lab. of Semiconductor Materials Science,Institute of Semiconductors,Chinese Academy of Sciences , Beijing 100083, China);New progress of studies on semiconductor materials[J];Semiconductor Technology;2002-03
3 MA Tingxiao, YANG Ping, YU Yongning, MAO Weimin Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Micro-process of Cube Texture Formation in High Purity Electronic Aluminum Foils[J];Journal of University of Science and Technology Beijing;2003-02
4 CHEN Leng, MAO Weimin, FENG Huiping, YU Yongning Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Rapid Measurement of Texture for Cold Rolling Interstitial Free Steel Sheets[J];Journal of University of Science and Technology Beijing;2003-02
5 R. R. Boyer ( Boeing Commercial Airplane Group , USA );Titanium Usage On Commercial Aircraft[J];Journal of Materials Engineering;1992-02
6 ZHAI Yong-qing,YANG Guo-zhong,ZHOU Xue-ling,LIU Hong-mei(College of Chemistry and Environmental Science,Hebei University,Baoding 071002,China);Synthesis of Sr_2CeO_4by glycine combustion method and its luminescent properties[J];Materials Science and Technology;2008-03
7 Zhu Zhishou;Gu Jialin;Chen Nanping(Tsinghua University);The Influence of Cold Rolling on the Formation of Recrystallization Texture in Titanium Sheet[J];MATERIAL SCIENCE AND TECHNOLOGY;1995-02
8 He YANG+, Lianggang GUO and Mei ZHAN College of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an 710072, China;Role of Friction in Cold Ring Rolling[J];材料科学技术(英文版);2005-06
9 WANG Cheng, ZHAO Xi-cheng, YANG Xi-rong, WANG Xing-yun(School of Metallurgical Engineering, Xi’an University of Architecture & Technology, Xi’an 710055, China);Microstructure and Properties of Commercial Pure Titanium Processed by ECAP at Room Temperature[J];Journal of Materials Science and Engineering;2009-03
10 Zhao Jing1, Cao Wenbin1, Tan Yongsheng2, Zhang Yan2, Fei Qunxing2, Ge Changchun1 (1. University of Science and Technology Beijing, Beijing 100083, China) (2. Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024, China);Effects of Processing Parameters on Forming of Nickel -Based Alloy Powders by Laser Engineered Net Shaping[J];Rare Metal Materials and Engineering;2008-04
【Secondary References】
Chinese Journal Full-text Database 1 Hits
1 MOU Shaozheng1,HAN Dong1,YANG Yingli2,LI Zenghui1,YANG Yantao1 (1.Xi'an Aerospace Power Machinery Factory, Xi'an 710025, Shanxi China; 2.Northwest Institute for Nonferrous Metal Research, Xi'an 710016, Shanxi China);Research on Tube Spinning Process and Properties of Cast Titanium Alloy[J];China Metal Forming Equipment & Manufacturing Technology;2009-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved