Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Chinese Journal of Rare Metals》 2007-02
Add to Favorite Get Latest Update

Microstructures and Mechanical Properties of Sprayformed 7A60 Alloy

He Xiaoqing1,2,Xiong Baiqing1,Sun Zeming2,Zhang Yongan1,Wang Feng1,Zhu Baohong1(1.State Key Lab for Fabrication & Processing of Nonferrous Metals,General Research Institute for Non-ferrous Metals;2.National Analysis and Testing Center for Non-ferrous Metals & Electronic Materials,General Research Institute for Non-ferrous Metals,Beijing 100088,China)  
7A60 alloy was prepared by sprayforming technique.The microstructure and mechanical properties of the alloy were studied using scanning electron microscopy,transmission electron microscopy,X-ray diffraction,and tensile tests.The secondary phases of the sprayforming alloy were examined.The tensile test results indicated that the tensile strength of the sprayformed 7A60-T6 alloy could reach 733 MPa and the elongation was about 9.5%.
【Fund】: 国家重点基础研究发展计划资助项目(2005CB623704)
【CateGory Index】: TG113
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved