Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《The Chinese Journal of Nonferrous Metals》 2001-S1
Add to Favorite Get Latest Update

Properties of rapidly solidified Cu Cr alloys with high strength and high conductivity

ZHANG Rui feng, SHEN Ning fu (Research Center for Materials, Zhengzhou University, Zhengzhou 450002, P.R.China)  
An investigation of properties including conductivity and microhardness was carried out for the as cast and aged Cu (0.6~5.0)%Cr (in atom) alloys produced by single roller melt spinning method. The results show that the hardness of the rapidly solidified alloys is remarkably enhanced with only a small decrease of conductivity after proper aging treatment in comparison with the conventional solution treated and aged Cu Cr alloys. The effects of rapid solidification process and subsequent aging on the electrical and mechanical properties were discussed on the basis of Matthiessen's hypothesis and the theories of precipitation and dispersion strengthening, respectively.
【CateGory Index】: TG146.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 DING Yu-tian et al (Lanzhou Univeristy of Science and Technology, Institute of Material , Lanzhou 730050, Gansu Province, China);The status-quo of contact wire and popular topics of its research[J];Electric Wire & Cable;2004-02
2 WANG Youhong;MA Jiankai;YANG Yutan;ZHANG Junting;LI Qiushu;Institute of Materials Science and Technology,Taiyuan University of Science and Technology;;The Factors Affecting the Resistance of Cu-Sn Alloys[J];Materials Review;2014-S1
3 WANG De-bao~1 WU Yu-cheng~1 WANG Wen-fang~1 ZONG Yue~2 (1.School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China; 2.Composites Company,Hefei University of Technology,Hefei 230009,China);Preparation,microstructure and properties of Cu-15wt%Cr alloy by high-energy ball milling[J];Transactions of Materials and Heat Treatment;2007-S1
4 WANG Hai-long~1,WU Yu-cheng~(1,2),WANG De-bao~1,WANG Wen-fang~(1,2),ZONG Yue~2,ZHENG Zhi-xiang~1(1.School of Materials and Engineering,Hefei University of Technology,Hefei 230009,China;2.Hefei University of Technology Composite Materials Hi-Tech R&D Ltd Co,Hefei 230009,China);Study on preparation and properties of Cu-Cr mechanically alloyed powder[J];Transactions of Materials and Heat Treatment;2009-03
5 MA Xing-Chi, HUANG Jin-Liang, JIA Shu-Guo, LIU Ping, TIAN Bao-Hong ( College of Material Science & Engineering, Henan University of Science & Technology, Luoyang 471003, China);Study of Aging Property and Electrical Wear Resistance of Cu-Ag-Zr Alloy for Contact Wire Line Used in Catenary of Railway[J];Journal of Luoyang Institute of Technology;2005-03
6 WANG De-bao1,WU Yu-cheng1,WANG Wen-fang1,ZONG Yue2,HUANG Xin-min1(1.School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,Anhui;2.Composite Co.,Hefei University of Technology,Hefei 230009,Anhui);Study on Age Hardening Characteristics of Cu-Cr Alloy Prepared by Mechanical Alloying[J];Heat Treatment;2009-01
7 WANG Hai-long1,WU Yu-cheng1,2,WANG De-bao1,WANG Wen-fang1,2,ZONG Yue2,ZHENG Zhi-xiang1(School of Mateerials Science and Engineering,Hefei University of Technology,Hefei 230009,Anhui;2.Composite Co.,Hefei University of Technology,Hefei 230009,Anhui);Effect of Sintering Process on Performances of Cu-Cr Composite[J];Heat Treatment;2009-02
8 YANG Yu-tan;LI Qiu-shu;ZHANG Jun-ting;YU Ming-xiang;WANG You-hong;Institute of Materials Science and Technology,Taiyuan University of Science and Technology;;Microstructures and Properties of Cu-Sn-Fe Alloys with High Strength and High Conductivity[J];Journal of Taiyuan University of Science and Technology;2014-01
9 WANG Ji-dong (Yanshan University, Qinhuangdao 066004, China);Effects of Deformation and Heat Treatment on Morphology of Cr Phase in CuCr Alloy[J];Physics Examination and Testing;2004-05
10 ZHANG Su-qiao(Liren college,Yanshan University,Qinhuangdao 066004,Hebei,China);Effect of Heat Treatment on Electrical Conductivity of CuBiAl Alloy[J];Physics Examination and Testing;2006-02
China Proceedings of conference Full-text Database 2 Hits
1 MA Xing-chi (School of Material Science and Engineering, Tongji University, Shanghai 200092, China);Study on Aging Property and Electrical Wear Resistance of Cu-Ag-Zr-Ce Alloy[A];[C];2005
2 WANG De-bao~1 WU Yu-cheng~1 WANG Wen-fang~1 ZONG Yue~2 (1.School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China; 2.Composites Company,Hefei University of Technology,Hefei 230009,China);Preparation,microstructure and properties of Cu-15wt%Cr alloy by high-energy ball milling[A];[C];2007
【Citations】
Chinese Journal Full-text Database 5 Hits
1 Ding Houfu (Hefei University of Technology);Vacancy and Helical Dislocation in the Rapidly Quenched Copper Alloys[J];MATERIAL SCIENCE AND TECHNOLOGY;1996-03
2 Ding Houfu(Hefei University of Technology);Observation and Discussion about Several Kinds of Crystal Defects in the Rapidly Quenched Copper Alloys[J];MATERIAL SCIENCE AND TECHNOLOGY;1996-04
3 LIU Ping; KANG Buxi; CAO Xingguo; HUANG Jinliang; GU Haicheng1)(Institute of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an 710049)2)( Department of Materials Engineering, Luoyang institute of Technology, Luoyang 471039)Cormspondent:;COHERENT STRENGTHENING OF AGING PRECIPITATION IN RAPIDLY SOLIDIFIED Cu-Cr ALLOY[J];ACTA METALLRUGICA SINICA;1999-06
4 SHEN Ningfu; TANG Yali; GUAN Shaokang; ZHANG Dongjie (Zhengzhou Institute of Technology, Zhengzhou 450002);SOLIDIFICATION THEORY AND RAPID SOLIDIFICATION[J];ACTA METALLRUGICA SINICA;1996-07
5 Liu Ping, , Kang Buxi, Cao Xingguo, Huang Jinliang,Yin Biao and Gu Haicheng School of Materials Science and Engineering,Xian Jiaotong University, Xian 710049, P. R. China Department of Materials, Luoyang Institute ofTechnology, Luoyang 471039, P. R. C;AGING PRECIPITATION AND RECRYSTALLIZATION OF RAPIDLY SOLIDIFIED CuCrZrMg ALLOY[J];THE CHINESE JOURNAL OF NONFERROUS METALS;1999-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 WANG Dong-feng1, WANG Ding-jiang1, KANG Bu-xi2, TIAN Bao-hong2 (1. The Second Department , the First Aeronautic Institute of Air Force,Xinyang 464000, China; 2.Department of Material Science and Engineering , Henan University of Science and Technology, Luoyang 471039, China);Analysis on factors affecting the aging effect of rapidly solidified Cu-Cr alloy[J];Ordnance Material Science and Engineering;2007-02
2 Huanming Chen and Benfu Hu Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083,China; Physics and Electrical Information Engineering School, Ningxia University, Yinchuan 750021,China;Numerical calculation on temperature field of FGH95 alloy droplet during rapid solidification[J];北京科技大学学报(英文版);2003-03
3 YANG Mao sheng, ZHONG Xue you (Material Science and Engineering School,UST Beijing,Beijing 100083,China);Metal spray deposition forming principles and application[J];JOURNAL OF BAOTOU UNIVERSITY OF IRON AND STEEL TECHNOLOGY;2000-02
4 CHEN Wenge WANG Chun (School of Materials Science and Engineering,Xi'an University of Technology,Xi'an 710048);Advances in Copper-matrix Material for Leadframe and Electronic Packaging of Integrated Circuitry (IC)[J];Materials Review;2002-07
5 ZHANG Jianping CHEN Jingchao ZHOU Xiaolong MA Zhanhong (Graduate School,Kunming University of Science and Technology; Faculty of Material and Metallurgy Engineering,Kunming University of Science and Technology,Kunming 650093);Application of Rapid Solidification in Producing CuCr Alloys[J];Materials Review;2002-10
6 LIU Jinglei RUAN Feng Department of Mechanical Engineering,South China University of Technology,Guangzhou 510640;WANG Erde LIU Zuyan Department of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001;Progress in Research on High-strength and High-conductivity Copper-matrix Material[J];Materials Review;2005-07
7 HUA Min,MA Liqun,DING Yi,ZHANG Zhenzhong,SHEN Xiaodong(College of Materials Science and Engineering Nanjing University of Technology, Nanjing 210009);Research Status of Rapidly Solidified Mg-based Alloys[J];Materials Review;2007-02
8 LU Baiping (School of Material Science and Engineering,Nanehang Hangkong University,Nanehang 330063);Research Development of High-strength and High-conductivity Copper Alloys[J];Materials Review;2007-S3
9 ZHOU Zhiming1 ,WANG Yaping2,XIA Hua1,ZHAN Jie1(1 School of Materials and Engineering,Chongqing Institute of Technology,Chongqing 400050;2 School of Science,Xi’an Jiaotong University,Xi’an 710049);Research Development of Manufacture Processing of Cu-Cr Alloy[J];Materials Review;2008-03
10 ZHOU Zhiming~1,TANG Liwen~1,XIA Hua~1,PENG Chengyun~1,WANG Yaping~2 (1 College of Material Science and Engineering,Chongqing University of Technology,Chongqing 400050; 2 School of Science,Xi'an Jiaotong University,Xi'an 710049);Microstructure and Properties of Melt-spun CuCr25 Alloys[J];Materials Review;2009-24
China Proceedings of conference Full-text Database 4 Hits
1 WANG Yuping,ZHANG Runli,YOU Yirain (Xian High Voltage Apparatus Research Institute Co.,Ltd,Xi'an 710077);The Development of the Rapid Solidification for Preparation of Fine - grain and Super-fine Cu-Cr Alloy[A];[C];2010
2 LI Wei (School of Materials Science and Engineering, Shanghai Jiaotong University, Shanghai 200030, China);Electrical Sliding Wear Behavior of Cu-Cr-Zr Alloy[A];[C];2005
3 ZHANG Meng, GUO Shou-hui, SHUAI Ge-wang, CHEN Xiao-fang (College of Materials Science and Engineering, Nanchang University, Nanchang 330047, China);Characteristics of distribution and microstructures of Y in Cu and Cu-Cr Alloys[A];[C];2005
4 ZHANG Yi~(1,2) LIU Ping~2 TIAN Bao-hong~3 ZHAO Dong-mei~3 CHEN Xiao-hong~(1,2) (1.School of Materials Science and Engineering,Xi’an University of Technology,Xi’an 710048,China; 2.Institute of Electric Functional Materials,University of Shanghai for Science and Technology,Shanghai 200093,China; 3.School of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 471003,China);Effect of aging process on microstructure and properties of Cu-1.0Ni-0.25Si-0.1Zn Alloy[A];[C];2007
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 WANG Li-ping, ZHOU Min, ZHAO Yue-min, ZHANG Hong-mei (College of Environment Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221008, Jiangsu, China);A RESEARCH ON COLLECTION EFFICIENCY OF ESP FOR SINTERING DUST[J];Journal of Safety and Environment;2004-01
2 BAI Ming-hua,LI Qiu-rong,HE Jun,ZHENG Hai-wu,GAO Xue-wei(College of Environment and Chemical Engineering,Yanshan University,Qinhuangdao 066004,Hebei,China);Experimental study on synergistic treatment of SO_2 and NO in smoky fog by means of pulse corona discharge and CuO/γ-Al_2O_3[J];Journal of Safety and Environment;2007-04
3 Liu Ping; Cao Xingguo; Kang Buxi; Huang Jinliang; Gu Haicheng;MICROSTURCTURE AND PROPERTIES OF RAPIDLY SOLIDIFIED Cu - Cr MLLOY WITH HIGH - STRENGTH HIGH - CONDUCTIVITY[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1999-01
4 Zhu Jun,Chen Donggao,Wang Dong,Mingzhu,Zhou Guxin;ARGON-ARC SOLDERING OF DISSIMILAR METALSOF COPPER AND STEEL[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;2000-04
5 Li Jinping,Luo Shoujing,Gong Zhaohui,Hu Weiye,Niu Wei;STUDY OF THE EFFECT OF THE TECHNOLOGY PARAMETERS ON CuCr ALLOYS POWDERS MADE BY MECHANICAL ALLOYING[J];Ordnance Material Science and Engineering;2000-06
6 LUO Shoujing, LI Jinping, NIU Wei, HU Weiye, GONG Zhaohui Correspondent:LI Jinping , P.O.Box435 of Harbin Institute of Technology,Harbin 150001,China;Effect of third element on properties of CuCr alloys produced by explosive compaction[J];Ordnance Material Science and Engineering;2001-05
7 LIU De - bao, GUI Chun - xiang, MA Xu ( Institute of Material, Hebei University of Technology, Tianjin 300293, China; Institute of Material, Tianjin University of Technology, Tianjin 300191, China);Surface coating copper on AlN particle and AlN particle - reinforced copper matrix composites[J];Ordnance Material Science and Engineering;2005-02
8 FENG Yu, ZHANG Cheng-yu,YANG Zhi-mao,WANG Ya-ping,DING Bing-jun (School of Science, Xi'an Jiaotong University, Xi'an 710049, China;Department of Mechanical Engineering,Tsinghua University,Beijing 100084,China;Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China);Effects of nanocrystallization of CuCr contact materials on characteristics of vacuum discharge[J];Ordnance Material Science and Engineering;2005-05
9 DING Jian, ZHAO Niao-qian, SHI Chun-sheng, HE Chun-nian (College of Material Science and Engineering, Tianjin University, Tianjin 300072, China);Research on preparation technology of nano-reinforced copper matrix composites[J];Ordnance Material Science and Engineering;2005-05
10 XU Shao-fan,GU Bin,LI Zheng,WANG Cheng-fu(Hefei University of Technology,Hefei 230009,China);Studies on preparation and properties of copper-coated carbon fiber/copper-coated graphite/copper matrix composites[J];Ordnance Material Science and Engineering;2006-05
China Proceedings of conference Full-text Database 1 Hits
1 LEI Jing-guo~1, JING Xiao-tian~1, ZHI Xiao~2 (1.College of Institute of Materials Engineering, Xi'an University of Technology, Xi'an,710048 2.China Luoyang Float Glass Group Company of Limited Liability, Luoyang, 471009);On Manufacturing Solution Polybasic Copper Alloys Rod & Wires By Continuous Casting and Rolling Process[A];[C];2005
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 ZHAO Yuanxia1,LIU Ping2,LIU Xinkuan2,CHEN Xiaohong2,MA Fengcang2,LI Wei2,HE Daihua2 (1 School of Mechanical Engineering,University of Shanghai for Science and Technology,Shanghai 200093;2 School of Materials Science and Engineering,University of Shanghai for Science and Technology,Shanghai 200093);Research Progress and Application of Contact Wire for High-speed Electric Railway[J];Materials Review;2012-03
2 LI Yong 1,2,YI Dan-qing1,LIU Rui-qing2,SUN Shun-ping1(1.Dept.of Material Science and Engineering,Central South University,Changsha 410083,China, 2.National Center for Copper Smelting and Process Engineering Technology Research,Ganzhou 341000,China);Research on electro-contact sliding wear of Cu-Ag-Fe alloy[J];Materials Science and Technology;2011-04
3 Zhang Yani~1 Zi Jinlei~1 Zheng Maosheng~2 Xu Changzheng~1 (1.School of Materials Science and Engineering,Xi'an Jiaotong University,Xi'an 710049,China)(2.Institute for Condensed Matter Physics & Materials,Northwest University,Xi'an 710069,China);Influence of Cr Micro-Addition on the Corrosion Resistance of Copper Alloy[J];Rare Metal Materials and Engineering;2007-S3
4 CHEN Chun-hao1,XUE Li-hong1,SHI Kun-yu1,SHEN Tao1,YAN You-wei1,LI Nai-hu2,LI Hui-jie2 (1.State Key Laboratory of Materials Processing and Die and Mould Technology, Huazhong University of Science and Technology,Wuhan 430074,China; 2.Alstom Grid China Technology Centre,Shanghai 201114,China);Effect of ball milling time on microstructure and properties of nanocrystalline W-Cu composite powder[J];Materials Science and Engineering of Powder Metallurgy;2011-06
5 Shen Jiao, Tang Zhenfang, Ji Rui, Li Wenke (Department of Physics, Jinan University, Guangzhou 510632, China);Preparation of Ag-Cr Contact Materials by High Energy Ball Milling[J];China Powder Science and Technology;2010-05
6 LIU Ping~1,LIU Yong~(1,2),TIAN Bao-hong~1,LI Wei~1 (1.School of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 471003,China;2.School of Materials Science and Engineering,Xi'an University of Technology,Xi'an 710048,China);Electrical sliding wear behavior of Cu-Cr-Zr alloy[J];Journal of Functional Materials;2006-02
7 SHEN Yue,FU Zuoxin,ZHANG Guoquan,KONG Jianwen,ZHANG Jiming, LIU Manmen,HU Jieqiong,WANG Song,XIE Ming(Kunming Institute of Precious Metals,State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Kunming 650106);Researching Prospect and Developing Tendency on High-strength and High-conductivity Copper-Silver Alloys[J];Materials Review;2012-13
8 ZHANG Dan-dan1,NI Feng1,WEI Shi-zhong2,XU Liu-jie1,2(1.School of Materials Science and Engineering,Henan University of Science and Technology; 2.Henan Engineering Research Center for Wear of Materials,Henan University of Science and Technology,Luoyang 471003,China);EFFECT OF BALL MILLING TIME ON MICROSTRUCTURE AND PROPERTIES OF Al_2O_3/Mo COMPOSITE MATERIAL[J];Powder Metallurgy Industry;2012-05
9 Xu Dongmei1,Liu Dianlong2(1.Tianshui Huatian Microelectronics Co.,Ltd.,Tianshui 741000,China; 2.Tianshui Huatian Technology Co.,Ltd.,Tianshui 741000,China);Oxidation Products,Mechanism and Control Methods of Copper-Based Lead Frame[J];Semiconductor Technology;2012-12
10 LIU Yong 1,2,LIU Ping2,TIAN Bao-hong2,LI Wei2 (1.School of Materials Science and Engineering,Xi′an University of Technology,Xi′an Shaanxi 710048,China; 2.School of Materials Science and Engineering,He′nan University of Science and Technology,Luoyang He′nan 471003,China);Analysis on Electrical Sliding Wear Morphology of Cu-Cr-Zr Alloy[J];Heat Treatment of Metals;2006-03
China Proceedings of conference Full-text Database 1 Hits
1 Huang Guojie Xie Shuisheng Mi Xujun Li Huaqing (State Key Laboratory,General Research Institute for Non-ferrous Metals Beijing,100088);Study on Cu-Cr-Zr Alloy Applied to High Speed Rail[A];[C];2007
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 Ding Houfu (Hefei University of Technology);EFFECT OF Cr-CONTENT AND AGING ON MICROSTRUCTURE AND PROPERTIES OF THE RAPIDLY SOLIDIFIED Cu-Cr-0.05Zr ALLOYS[J];TRANSACTIONS OF METAL HEAT TREATMENT;1994-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved