Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Steel Rolling》 2003-05
Add to Favorite Get Latest Update

FEM simulation of temperature field in roughing trains of hot strip rolling

LI Xue-tong1,WANG Min-ting1,DU Feng-shan1,ZHANG Jian-min2,WU Jian-feng2(1Yanshan University,Qinhuangdao 066004,China;2Baosteel Group Co,Shanghai 201900,China)  
Aiming at rolling practices in roughing trains of 2050mm hot strip rolling of Baosteel,2-dimension rolling model for temperature field has been developed with the aid of FEM,and the whole rough rolling has been simulatedThe simulation results show that the curves of temperature change with rolling time along the thickness direction of steel,the high-pressure water descaling and contact transfer of heat affect the temperature field of steel as well as rolling forces at different passesThe surface temperature of steel at the exit of rough rolling and rolling forces are close to the measured values
【Fund】: 国家自然科学基金项目(5007507)
【CateGory Index】: TG335
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 DI Hongshuang1 WANG Xiaonan1 Ning Zhongliang2 (1.Northeastern University;2.Fushun new Iron & Steel Co.,Ltd);FORMATION MECHANISM AND RESEARCH STATUS OF HOT ROLLING STRIP EDGE DEFECT[J];河南冶金;2008-03
2 Dong Jieji Sun Huizhao Su Xiaoming(Shandong LaiGang Group Technology Research and Development Center);Application of Updating Geometry Method during Numerical Simulation of Finish Rolling[J];莱钢科技;2007-03
3 Li Xuetong Du Fengshan Zang Xinliang Yanshan University, Qinhuangdao, Hebei,066004;3D Coupling Thermal, Mechanical and Microstructural Simulation on Plate/strip Roughing Process by FEM[J];中国机械工程;2006-01
4 Li Xuetong1 Du Fengshan1 Wang Minting1 Wu Jianfeng2 1. Yanshan University, Qinhuangdao, 066004 2. Baosteel Technical Center, Shanghai, 201900;FEM Analysis of Geometry Control of the Plate Head in the Vertical-horizontal Rolling Processes[J];中国机械工程;2005-08
【Citations】
Chinese Journal Full-text Database 1 Hits
1 Du FengshanZhou WeihaiZang Xinliang (Yanshan University);COMPUTER SIMULATION OF THE HOT CONTINUOUS ROLLING OF STRIP[J];机械工程学报;2001-12
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHOU Min;CHEN Ying-juan;MIN Jian-jun;MA Jin-jiang;NIU Qiang;Chongqing CISDI Iron and Steel Making Plant Integration Co.,Ltd.;CISDI Engineering Co.,Ltd.;;FEM Analysis and Process Parameter Optimizing of High Speed Wire Rod During Reducing and Sizing Multi-Pass Groove Rolling Process[J];中国冶金;2014-03
2 DU Xue-fei,PENG Yan-hua,GUO Sheng-rong,MA Tao,HUANG Kai-lin(CISDI Electric Technology Co.,Ltd.,Chongqing 400013,China);Physical Simulation and Virtual Reality Platporm of Flow Control System for Hot Rolling[J];轧钢;2013-02
3 GUO Xinyu1 HE Anrui1 SHAO Jian1 ZHOU Bin2 LI Quanliang2(1.National Engineering Research Center for Advanced Rolling, University of Science & Technology Beijing,Beijing 100083; 2.Guangxi Liuzhou Yinhai Aluminum Co.,Ltd.,Liuzhou 545006);Modeling and Simulation of Subsectional Cooling System during Hot Aluminum Rolling[J];机械工程学报;2013-04
4 ZHU Liang,WEI Peng,HOU Guo-qing,SU Ting-ting(State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology,Lanzhou 730050,China);Experimental Study on Edge-cracking in Austenitic Stainless Steel Cr15Mn9Cu2NiN during Hot Rolling[J];轧钢;2012-05
5 YANG Li-po1,WANG Ying-rui2,WANG Ying-jie2(1.Engineering Research Center of Rolling Equipment and Complete Technology of Ministry of Education,Yanshan University,Qinhuangdao 066004,Hebei,China;2.Hot Rolling Mill,Baoshan Iron and Steel Co.,Ltd.,Shanghai 200941,China);Precise Calculation of Plate Transient Temperature Field in Finish Rolling Process of Hot Tandem Rolling[J];钢铁;2009-10
6 KANG Yu-hua1,2,LIU Yi-lun2,HE Yu-hui2(1.College of Electromechanical Engineering,Hunan University of Science and Technology,Xiangtan 411201,China;2.School of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China);Thermo-mechanical coupled simulation during rolling on aluminum alloys[J];锻压技术;2008-05
7 Zhang Guohe~1 Zhang Qingdong~2 Xia Xiaoming~1 Gong Zhaohong~2 HuangHe~2 (1:Baosteel Group Meishan Iron and Steel Co.; 2:School of Mechanical Engineering,University of Science and Technology Beijing);Simulation on Deformation of Strip Profile During Rough Rolling in 1422mm Hot Strip Rolling Mill[J];冶金设备;2007-06
8 Zhu Guoming1 Kang Yonglin1 Chen Wei1 Ma Guangting1,21.Unversity of Science and Technology Beijing,Beijing,1000832.Laiwu Iron&Steel Incorporation,Laiwu,Shandong,271104;Thermal Mechanically Coupled 3D Finite Element Analysis in Multi-pass Reversing Breakdown Rolling of H-beam[J];中国机械工程;2007-14
9 LIU Sheng-yong1,ZHAO Zeng-rong1,XU Yan1,DONG Zhao-wei2(1.Institute of Vocational and Technique,Hebei Normal University,Shijiazhuang,Hebei,050031;2.Hebei Industrial Institute of Vocational and Technique,Shijiazhuang,Hebei,050091);FINITE ELEMENT ANALYSIS FOR COLD ROLLING RESIDUAL STRESS IN SHEET[J];河北冶金;2007-02
10 LI Jing-min~(1,2) TANG Guang-bo~2 LIU Zheng-dong~2 WANG Shun-xing~1 1.Henan University of Science and Technology,Luoyang 471003,China; 2.Central Iron & Steel Research Institute,Beijing 100081,China;Development of the Numerical Information Database for Microstructure and Property Prediction System of the CSP[J];轧钢;2007-02
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Liu Xiaolong Zhu Junwei(Hot Rolling Plant of Meishan Iron & Steel Co.,Nanjing 210039);Control and Adjustment of Single Edge Wave of Hot Rolled Strip[J];梅山科技;2008-01
2 Wei Liguo,Zhu Yan,Xu Guodong,Shi Yunfeng,Peng Yong(Manufacturing Management Department,Baosteel Branch,Shanghai 200941,China);Genesis Analysis and Improvement of Edge Cracks in Heavy Plates Manufactured by Baosteel[J];宝钢技术;2006-06
3 Liu Bo(The Hot Strip Mill Panzhihua New Steel and Vanadium Co.Ltd.);THE DISQUISITION ON HOT STRIP STEEL BORDER SPLIT DISFIGUREMENT[J];四川冶金;2006-02
4 YU Hai-liang,LIU Xiang-hua,JIAO Zhi-jie,ZHAO Xian-ming(State Key Laboratory of Rolling and Automation,Northeastern University,Shenyang 110004,Liaoning,China);Application of Geometry Model Updating Method in FEM Analysis of Plane Pattern of Plate[J];钢铁研究学报;2006-02
5 ZHANG Chuan-guoHAN Jing-tao LIU Jing YU Wan-hua(School of Sci.and Eng.,Univ.of Science and Technolog Beijing,Beijing 100083 China);Three-dimensional finite-element method simulation of hot rough rolling[J];塑性工程学报;2006-01
6 YU Hai-liang,LIU Xiang-hua,LI Chang-sheng(The State Key Laboratory of Rolling & Automation,Northeastern University,Shenyang 110004,China.);FEM Analysis to the Slab Corner Metal Flow Condition During Multi-Pass V-H Rolling Process[J];东北大学学报;2005-10
7 ZHAO Qiong(The Technology Center Of Jilin-jianlong Steel & Iron Group. Co. Ltd., Jilin 132301, China);THE EDGE CRACKING ANALYSIS ABOUT HOT ROLLING STRIP STEEL AND AMELIORATION EFFECT[J];理化检验(物理分册);2004-12
8 Li Xuetong 1 Xu Shimin 1 Du Fengshan 1 Wu Jianfeng 2 1.Yanshan University,Qinhuangdao,066004 2.Baosteel Technical Center,Shanghai,201900;Study on Strip Tail Shape and Control on Hot Mill[J];中国机械工程;2004-14
9 LI Xue-tong1,WANG Min-ting1,DU Feng-shan1,ZHANG Jian-min2,WU Jian-feng2(1Yanshan University,Qinhuangdao 066004,China;2Baosteel Group Co,Shanghai 201900,China);FEM simulation of temperature field in roughing trains of hot strip rolling[J];轧钢;2003-05
10 DU Fengshan1,ZHU Guangming1,SUN Dengyue1,WANG Yuhua2(1. Yanshan University, Qinhuangdao 066004, China;2. Baoshan Iron and Steel Group Co, Shanghai 201900, China);Analysing Reason for Excess Tension of Six-Roller Sheet Rolling Mill Using FEM[J];钢铁研究学报;2003-01
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 YUAN Wei;LI Chuan;QIAN Zhen-mao;XU Xi-yi;ZENG Yan;General Hot Strip Mill,WISCO;;Analysis and improvement for the edge black line defect on SPHC coil[J];轧钢;2015-05
2 DU Hong-zhi;WANG Ya-fen;;Research of Edge Cracks Defects of Boron Steel[J];金属世界;2015-05
3 Wu Anmin;Capital Engineering & Research Incorporation Limited;;Impact Analysis of the Bending and Rolling Force on the Shape of Roll Gap[J];冶金设备;2015-04
4 HUANG Wei-li;LIU Shu-guang;WANG Xing-juan;YANG Zhi-gang;WANG Li-gang;LI Yao-guang;Technology Centre,Delong Iron and Steel Company;No.1 Steel Rolling Mill,Tangshan Iron and Steel Company,Hebei Iron and Steel Group;College of Metallurgy and Energy,Hebei United University;;Process Optimization of Hot-rolled Steel Strip Q235B[J];河北联合大学学报(自然科学版);2015-02
5 CUI Huijun;REN Jianbin;YANG Chao;JIANG Xingyuan;Baosteel Desheng Stainless Steel Co. ,Ltd.;;Analysis on edge-sliver defect of nickle-saving austenitic stainless steel[J];宝钢技术;2015-02
6 Tong Yu;Wu Anmin;Capital Engineering and Research Incorporation Limited;;ANALYSIS ON THE INFLUENCE OF ROLL BENDING FORCE ON THE SHAPE OF ROLL GAP[J];冶金信息导刊;2015-01
7 ZHENG Fu-yin;WANG Li-ping;DENG Su-huai;CHAO Yue-lin;Shougang Research Institute of Technology;;Simulation research on austenite grain refining in roughing of wire rod[J];轧钢;2015-01
8 CHEN Zhi-ping,PENG Shi-heng2,NI Xiu-hua1(1.Technic Centre,Shanghai Meishan Iron and Steel Co.,Ltd.,Nanjing 210039,Jiangsu,China; 2.State Key Laboratory for Advanced Steel Processes and Products,Central Iron and Steel Research Institute,Beijing 100081,China);Control Technology of Upwarping Defects for MRT-4 Hot Rolled Plate[J];物理测试;2013-04
9 ZHAI Hui-bin,DU Xiao-zhong,GAO Pei-bin,JIANG Hui-bo(School of Mechanical Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China);Simulation and Influence Factors of Strip Rough Rolling Process[J];机械工程与自动化;2013-02
10 Chen Liansheng,Gu Huige,Song Jinying,Tian Yaqiang,Zhang Dawei,Wei Yingli,Shen Yongge(Hebei Key Laboratory of Modern Metallurgy Technology,Hebei United University,Tangshan 063009,Hebei,China);Study on "Black Line" on the Edge of SPHC Hot-rolled Strip[J];钢铁钒钛;2013-02
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 Liu Cai Cui Zhenshan (Yanshan University);THERMOMECHANICAL COUPLED FINITE ELEMENT MODELLING OF SLAB HOT ROLLING[J];机械工程学报;1998-04
2 Du Fengshan; Liu Cai; Lian Jiachuang (Yanshan University);3-DIM Model of Contacting Friction during Rolling Plate/strip[J];应用力学学报;1995-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved