Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Foundry》 2008-12
Add to Favorite Get Latest Update

Simulation of Mold Filling and Temperature Field of Mold in Metal Mold Gravity Casting by ProCAST

WANG Xu,ZHAO Yu-tao,SU Da-wei,ZHOU Kun(School of Materials Science and Engineering,Jiangsu University,Zhenjiang 212013,Jiangsu,China)  
Heat balance of metal mold is critical to the quality of castings and the serving life of the mold.Temperature distribution of mold determines the degree that the mold enduring thermal stress.Temperature distribution of mold in metal mold gravity casting has been analyzed by using FEM software ProCAST.The influences of natural cooling condition and force cooling condition have been investigated.The results showed that temperature changed with the increase of casting cycles,the steady temperature gradient was founded inside casting mold in seven casting cycles,and then heat balance of metal mold was reached gradually.
【Fund】: 江苏省科技成果转化项目(BA2005054);; 教育部重点基金资助项目(00170);; 江苏省高技术研究项目(BG2005026)
【CateGory Index】: TG249.3-39
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 YANG Yuan-ping1,2,YAN Hong-zhi1 (1.School of Mechanical and Electrical,Central South University,Changsha 410083,China;2.Xiang Xi National Vocational Technical College,Jishou 416000,China);Influences of structure and parameter on large zinc ingot die stress field[J];Materials Science and Technology;2012-03
2 Ye Xicong,Su Yanqing,Guo Jingjie,Zhang Yuehong,Fu Hengzhi(Harbin Institute of Technology,Harbin 150001,China);Numerical Simulation on Suction Casting Defects of TiAl Based Alloy Blade[J];Rare Metal Materials and Engineering;2011-02
3 Luo Guangsi1,Pan Anxia1,Zhao Ruye2(1.Changzhou Institute of Light Industry Technology 213164,China; 2.Xi'an Railway Transportation and Equipment Co.,Ltd.710086,China);Application of Simulation Techniques to Optimize Casting Techniques of K6 Swing Bolster[J];Bulletin of Science and Technology;2012-12
4 Yang Wanliang;Li Jingshe;Yang Hongbo;Song Fangfang;Huang Ting;University of Science and Technology School of Metallurgical and Ecological Engineering;University of Science and Technology State Key Lab of Advanced Metallurgy;;Numerical Simulation on Optimization of Shrinkage Cavity Defect of Steel SCM822H 3 t Ingot[J];Special Steel;2013-05
5 YANG Yuan-ping1,2,YAN Hong-zhi1 (1.School of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China; 2.Department of Mechanical and Electrical Engineering,Xiangxi Vocational Technical College for Nationalities, Jishou 416000,China);Thermal force behavior numerical simulation and failure analysis of zinc ingot die[J];Journal of Central South University(Science and Technology);2011-05
6 FAN Chang-jian,WANG Hui-fen,LIU Ting-ting(School of Mechanical Engineering,Nanjing University of Science & Technology,Nanjing 210094,China);Simulation of Temperature and Stress Field of Mould in Metal Gravity Casting Mould by ProCAST[J];Machine Building & Automation;2011-02
7 LIU Guo-feng,YU Huan,YAN Qing-song,XU Zhi-feng,XIONG Bo-wen(School of Materials Science and Engineering,Nanchang Hangkong University,Nanchang 330063,China);Numerical Simulation on Various Pressure Grade Filling of Thin-wall Aluminum Casting during Vacuum Counter-pressure Casting[J];Foundry Technology;2010-12
8 YANG Yuan-ping1,YAN Hong-zhi2(1.Xiangxi National Vocational Technical College,Jishou 416000,Hunan,China;2.School of Mechanical and Electrical Engineering,Central South University,Changsha 410083,Hunan,China);Stress Numerical Simulation and Crack Position Analysis for Zinc Ingot Die[J];Foundry;2010-08
9 YANG Yuan-ping1,YAN Hong-zhi2(1.Xiangxi Vocational and Technical College for Nationalities,Jishou 416000,Hunan,China; 2.School of Mechanical and Electrical,Central South University,Changsha 410083,Hunan,China);Analysis on Casting's Structure and Performance Distribution Based on ProCAST[J];Foundry;2011-09
10 YANG Yuan-ping1,ZHANG Bang-ying2(1.Department of Mechanical and Electrical Engineering,Xiangxi National Vocational Technical College,Jishou 416000,Hunan,China;2.College of Information Science and Engineering,Jishou University,Jishou 416000,Hunan,China);Influence of Pouring Speed and Gate Position on Stress Field of Large Aluminum Ingot Die[J];Foundry;2012-03
【Citations】
Chinese Journal Full-text Database 1 Hits
1 HAN Jin-hua;Analysis on and Countermeasures for the Service Life of the Cast Aluminum Dies[J];Sci-Tech Information Development & Economy;2006-16
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 HUANG Liang,YANG He,ZHAN Mei(State Key Laboratory of Solidification Processing,School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China);Development of the research on splitting spinning[J];Materials Science and Technology;2008-04
2 HAN Xiong-wei,WU Wei(School of Material Science and Engineering,Xihua University,Chengdu 610039,China);Numerical Analysis of Temperature Field of Aluminum Alloy Die Casting Dies[J];Journal of Changshu Institute of Technology;2007-04
3 Zhou Yuhui,Wu Wei(Xihua University,Chengdu 610039,China);Numerical Simulation of Temperature Field of the Dies and its Application in ProCAST[J];Electromachining & Mould;2005-05
4 SU Da-wei,ZHAO Yu-tao(Jiangsu University,Zhengjiang 212013,China);Load Analysis of Aluminium Alloy Wheel with Consideration of Residual Stress[J];Materials for Mechanical Engineering;2008-05
5 NING Zhi-liang, ZHOU Bi-de, XUE Xiang, ZHANG Chun-hui (Department of Material Science and Engineer, Harbin Institute of Technology, Harbin 150001 China);Study on Temperature Field of Die Casting Dies[J];Journal of Harbin University of Science and Technology;1999-06
6 You Dong-dong Shao Ming Li Yuan-yuan Zhou Zhao-yao (School of Mechanical Engineering,South China Univ.of Tech.,Guangzhou 510640, Guangdong,China);Selection of Key Control Parameters of Mold-Temperature-Control Solidification[J];Journal of South China University of Technology(Natural Science Edition);2007-08
7 ZHAO Yu-tao,SU Da-wei(School of Material Science and Engineering,Jiangsu University,Zhenjiang,Jiangsu 212013,China);Analyses on stress distribution of aluminum wheel considering residual stress[J];Journal of Jiangsu University(Natural Science Edition);2008-03
8 LI Xue-mei1,2,WANG Hong-fei1(1South China University of Technology,Guangzhou 510640,China)(2Zhongkai University of Agriculture and Technology,Guangzhou 510225,China);Application of intelligent control in die temperature control forming process[J];Machinery Design & Manufacture;2007-01
9 YOU Dong-dong,SHAO Ming,ZHOU Zhao-yao(Department of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China);The application of MTC forming technology and the MTC solidification mumerical simulation[J];Machinery Design & Manufacture;2007-01
10 ZHOU Kun,ZHAO Yu-tao,SHU Da-wei,WANG Xu (School of Material Science and Engineering,Jiangsu University,Zhenjiang 212013,China);Cornering fatigue capability analysis of aluminum alloy automotive wheels based on finite element analysis[J];Machinery Design & Manufacture;2009-05
China Proceedings of conference Full-text Database 2 Hits
1 LIU Hong-lei,LIANG Yong,WANG Hong-bao (Citic Dicastal Group,Qinhuangdao Dicastal-Xinglong Wheel Manufacturing Co.,Ltd., Qinhuangdao 066004,Hebei,China);Al-Si Alloy Smelting Process Sr Smelting Loss Study[A];[C];2011
2 Jungang Dong1,Li Wan1,Baizai Zhang2,Zhiyuan Huang2,Shusen Wu1 (1 State Key Laboratory of Materials Processing and Die & Mold Technology,Huazhong University of Science and Technology,Wuhan 430074,China;2 Guangdong Hongtu Technology Co.Ltd.,Gaoyao,Guangdong,526108,China.);Research and Development of Die Temperature Control Equipment Based on Overheated Water with High Pressure for Die Casting[A];[C];2010
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 LI Chengbin and FAN Zhengjie(Research Institute,Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900,China);Research on numerical simulation for big ingot solidification process[J];Baosteel Technology;2011-04
2 SHA Zhensong HAN Jianmin LI Ronghua LI Weijing WANG Jinhua (School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044);Development State and Prospect of Counter-pressure Casting Technology[J];Materials Review;2004-11
3 HONG Run-zhou,ZHOU Yong-jiang,YAO Wei-bing(Beijing Institute of Aeronautical Materials,Beijing 100095,China);Effect of Filling Velocity on Metallurgical Quality of Thin Wall Aluminium Alloy Casting in Vacuum Suction[J];Journal of Materials Engineering;2006-S1
4 HU Hong-jun,YANG Ming-bo,LUO Jing,WANG Chun-huan,CHEN Kang(Chongqing Institute of Technology,College of Material Science and Engineering,Chongqing 400050,China);Application of the software ProCAST in the casting of solidification simulation[J];Materials Science and Technology;2006-03
5 Liangrong JIA, Shoumei XIONG and Baicheng LIU (Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China);Study on Numerical Simulation of Mold Filling and Heat Transfer in Die Casting Process[J];材料科学技术(英文版);2000-03
6 LE Qi chi, OU Peng, CUI Jian zhong, LU Gui min (The Key Laboratory of Electromagnetic Processing of Materials,Ministry of Education, Northeastern University, Shenyang 110004,China.;Investigation on a New Processing of Semi-Solid Slurrying for Magnesium Alloy[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2002-04
7 Sun Zhigang,Lin Lin,Wang Yaokun;The Application of Simulation Software on Optimizing Design of Top Pour Ingot Mould[J];Heavy Castings and Forgings;2011-03
8 XUE Han song,LI Hua ji, WANG Yong qin (College of Mechanical Engineering , Chongqing University, Chongqing 400044, China);Characteristics of Filling Process and Factors of Differential-pressure Cast for Thin-wall Castings[J];Journal of Chongqing University(Natural Science Edition);2002-10
9 Pan Yanfeng Shen Yifu Gu Dongdong et al;Present Status of Development for Selective Laser Sintering(SLS)[J];Tool Engineering;2004-06
10 HUANG Zheng-yan(Guangxi Technological College of Machinery and Electricity,Nanning 530007,China);Rapid Prototyping Technology and Its Application[J];Equipment Manufacturing Technology;2007-07
【Secondary References】
Chinese Journal Full-text Database 7 Hits
1 YANG Yuan-ping1,2,YAN Hong-zhi1 (1.School of Mechanical and Electrical,Central South University,Changsha 410083,China;2.Xiang Xi National Vocational Technical College,Jishou 416000,China);Influences of structure and parameter on large zinc ingot die stress field[J];Materials Science and Technology;2012-03
2 LUO Liang-shun;HAN Bao-shuai;WANG Liang;SU Yan-qing;FENG Ming;GUO Jing-jie;FU Heng-zhi;School of Materials Science and Engineering,Harbin Institute of Technology;State Key Laboratory of Materials Processing and Die & Mould Technology,Huazhong University of Science and Technology;;The influence of process parameters on the vacuum suction casting titanium aluminum connecting rod[J];Materials Science and Technology;2013-04
3 Luo Liangshun,Feng Ming,Su Yanqing,Li Xinzhong,Guo Jingjie,Fu Hengzhi(School of Materials Science and Engineering,Harbin Institute of Technology);Numerical Simulation of Suction Casting Titanium Aluminum Connecting Rod[J];Special Casting & Nonferrous Alloys;2012-01
4 Xiong Bowen1,2,Yu Huan2,Yan Qingsong2,Xu Zhifeng2,Cai Changchun2,Wang Jiahui2,Yang Zhen2 (1.Beijing Institute of Aeronautical Materials;2.National Defence Key Discipline Laboratory of Light Alloy Processing Science and Technology,Nanchang Hangkong University);Research Progress in Vacuum Counter-pressure Casting Thin-Walled Components[J];Special Casting & Nonferrous Alloys;2012-03
5 YANG Yuan-ping1,ZHANG Bang-ying2(1.Department of Mechanical and Electrical Engineering,Xiangxi National Vocational Technical College,Jishou 416000,Hunan,China;2.College of Information Science and Engineering,Jishou University,Jishou 416000,Hunan,China);Influence of Pouring Speed and Gate Position on Stress Field of Large Aluminum Ingot Die[J];Foundry;2012-03
6 WANG Junwei1, WANG Zhiping1, 2, 3, LU Yang1, 2, and CHENG Bo1 1 College of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China 2 State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050, China 3 Renewable Energy Laboratory, Lanzhou University of Technology, Lanzhou 730050, China;Self-heating Probe Instrument and Method for Measuring High Temperature Melting Volume Change Rate of Material[J];中国机械工程学报(英文版);2013-02
7 LIU Hong-lei1,2,ZHAO Zhi-qiang2,TAN Xue-ju2,LIU Hong-feng3(1.CITIC DICASTAL Group,Qinhuangdao DICASTAL-XINGLONG Wheel Manufacturing Co.,Ltd.,Qinhuangdao Hebei 066004,China; 2.CITIC DICASTAL Co.,Ltd.,Qinhuangdao Hebei 066004,China; 3.Cangzhou Dahua TDI Co.,Ltd.,Cangzhou Hebei 061000,China);Discussion about Gravity and Pressure Casting for the production of Auto Aluminum Wheels[J];Foundry Equipment and Technology;2013-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved