Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Anhui University of Technology and Science(Natural Science)》 2009-01
Add to Favorite Get Latest Update

Analysis of false waster phenomenon in the mechanical machining process

YU Hua(Dept.of Mech.Engn.,Anhui University of Technology and Science,Wuhu 241000,China)  
In the machining process,the technological benchmarks ofen deviated from the design benchmarks for the convenience of working and measuring,and produce false waste products.The theory of the technological dimensional chain must be adopted to fixing the processing size,in order to determine the qualified products area、false waster area and waster area,so as not to scrap qualified parts and cause wastage.The paper describes how to correctly identify the false waster area,thereby increasing production rate and reducing the production cost,while the technology benchmark deviated ftom the design benchmark.The paper takes benching the concave convex parts as examples.
【CateGory Index】: TG801
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 CHEN Si-yi (Electromechanical Engineering Department,Sichuan Technology & Business College,Dujiangyan 611830,Sichuan,China);Study on Reasons and Identification of False Waste Products in Machining[J];Journal of Chongqing Jiaotong University(Natural Science);2011-04
【Citations】
Chinese Journal Full-text Database 2 Hits
1 An Hu-ping,Jia Quan-cang,Liu Jing-hua(Mechanic inspection-measure and mischance diagnosis institute of Lanzhou Teacher's college,Lanzhou Gansu 730070,China);The study on cause of so-called waste parts in the machining and checking of mechanic parts[J];Mechanical Research and Application;2005-05
2 CHEN Xiqu(Henan Institute of Science and Technology, Xinxiang 453003, CHN);Distinguishing of False Waster of Workpieces Based on Tolerance Zone[J];Manufacturing Technology & Machine Tool;2007-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 SUN Bo (Department of Physics,Anshan Normal University,Anshan Liaoning 114005,China);An Application of Single Variable Error Calculation Method in Fixture Synthetical Error Calculation[J];Journal of Anshan Normal University;2004-02
2 ZHAO Shi-ying,GUO Jun-zhong(Department of Mechanical & Electronic Engineering,Beijing Institute of Graphic Communication,Beijing 102600,China);Analysis of Assembly Process Method about Offset Eccentric Sleeve[J];Journal of Beijing Institute of Graphic Communication;2010-04
3 Wu Yuming (The Building Material Industrial School of Gansu Province,Lanzhou 730079,China);The Effection of the Thermic Distortion in the Machining Accuracy and the Action Taked[J];Journal of Changchun University of Science and Technology(Higher Education Edition);2008-03
4 LI Hai-bo (Dept.of Mechanical Engineering,Changchun Institute of Technology,Changchun 130012,China);The figure approach up of the adjust assembly farad[J];Journal of Changchun Institute of Technology;2003-03
5 WANG Li-tao,et al. (Dept.of Mechanical Engineering,Changchun Institute of Technology,Changchun 130012,China);Differential calculus method of positioning error in fixture[J];Journal of Changchun Institute of Technology;2004-01
6 LIU Weina ZHAO Weihong ZHOU Junjie(College of Electromechanical Engineering,Changchun University of Science and Technology,Changchun 130022);System Analysis of Machine Assembly Accuracy[J];Journal of Changchun Institute of Optics and Fine Mechanics;2004-03
7 ZOU Zhe-wei,WAN Hui-xiong (Changjiang Engineering Vocational College,Wuhan 430212,China);Analysis of Location Error and Calculation Method[J];Journal of Changjiang Engineering Vocational College;2011-02
8 CHEN Si-yi (Electromechanical Engineering Department,Sichuan Technology & Business College,Dujiangyan 611830,Sichuan,China);Study on Reasons and Identification of False Waste Products in Machining[J];Journal of Chongqing Jiaotong University(Natural Science);2011-04
9 Yang Anjie:Mechanical Engineering Dept, Henan Institute of Engineering;Exploring the Teaching of Chain of Dimensions[J];Time Education;2009-09
10 SHI Yang1,ZHANG Yong2,HAN Qi3(1.The Armored Forces Military Representative Bureau of the PLA General Equipment Headquarters,Beijing 100851,China;2.Shanxi Diesel Engine Industry Corporation,Datong 037036,China;3.Military Delegate Branch in Shanxi Diesel Engine Industry Corporation,Datong 037036,China);Study on Rolling Technology of Main Oil Gallery on the Engine Block[J];Vehicle Engine;2007-05
China Proceedings of conference Full-text Database 1 Hits
1 Zhang Yun-dian1, Yu Fang1 (School of Mechanical Engineering, Hangzhou dianzi university, Hangzhou 310018, China);Numerical Control Modifying Method with Resonance Frequency of Piezoelectric Transducer and Amplitude Transformer[A];[C];2007
【Co-references】
Chinese Journal Full-text Database 3 Hits
1 YAO Rong-qing(Zhejiang Institute of Mechanical & Electrical Engineering,Hangzhou 310053,China);Analysis and Processing of False Waste Products[J];Coal Mine Machinery;2010-05
2 CHEN Xiqu(Henan Institute of Science and Technology, Xinxiang 453003, CHN);Distinguishing of False Waster of Workpieces Based on Tolerance Zone[J];Manufacturing Technology & Machine Tool;2007-06
3 ZHANG Yaohu(Xi’an Aerotechnical College, Xi’an 710077, CHN);Causes of Leave Waste and Determination during Machinery Process[J];Manufacturing Technology & Machine Tool;2008-12
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 CAO Li-wen ;LIN Jing(Jiamusi University Jiamusi 154007,China)LIU Han-cheng (Jiamusi TV Sets Factory,Jiamusi 154002,China);THE STUDY OF PSEUDO-WASTE PHENOMENA[J];JOURNAL OF JIAMUSI UNIVERSITY(NATURAL SCIENCE EDITION);2000-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved