Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Chinese Journal of Underground Space and Engineering》 2014-05
Add to Favorite Get Latest Update

Influence of Determining Rock Dynamic Fracture Toughness by Disc Specimens with Inconsistent Crack Fracture

Zhang Sheng;Yang Xianghao;School of Energy Science and Engineering,Henan Polytechnic University;  
In order to investigate the influence of the method to determine the rock dynamic fracture toughness by holed crack flatted Brazilian disc with inconsistent straight crack fracture. In the split Hopkinson press bar system,the disc specimens were subjected to impact,the dynamic load between two load ends were applied,and the initiation time of different point on the crack front was got. Meanwhile,using ANASYS software,the three-dimensional finite element models of disc specimen were set up,the time history curves of dynamic stress intensity factor at different points on the three-dimensional crack front were analyzed. The corresponding dynamic fracture toughness was calculated by experimental- numerical methods. The results show that,the dynamic stress intensity factor value of the crack front increase along the thick direction gradually. The factor of the crack front center point is most close to the value calculated according to plane state assumption,the relative error between them is less than 5 percent,and the relative error of the dynamic fracture is less than 1. 2 percent. However,when the impact of the disc thickness is not considered,and assuming the crack point just being located on the surface of the disk,the relative error between the values obtained from other points of the crack front and the two-dimensional method can reach 23 percent. There are great errors in using a two-dimensional simplified method.
【Fund】: 国家自然科学基金项目(51004043)
【CateGory Index】: TU45
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 10 Hits
1 MAO Yong-jian1,2,LI Yu-long1(1.School of Aeronautics,Northwestern Polytechnical University,Xi'an 710072,Shaanxi,China;2.Institute of Systems Engineering,China Academy of Engineering Physics,Mianyang 621900,Sichuan,China);Axial stress uniformity in specimens of SHPB tests[J];Explosion and Shock Waves;2008-05
2 LIU Qiang1,WANG Fang1,HUANG Xiao-ping1,CUI Wei-cheng2 (1 School of Naval Architecture,Ocean and Civil Engineering,Shanghai Jiao Tong University,Shanghai 200030,China;2 China Ship Scientific Research Center,Wuxi 214082,China);Three dimensional FE analysis of the plastic zone size near the crack tip[J];Journal of Ship Mechanics;2006-05
3 LI zhan-lu~(1a),WANG Qi-zhi~(1a,1b),LI Wei~(1b)(1a.Department of Civil Engineering and Applied Mechanics,1b.State Key Laboratory ofHydranulics and Mountain River Engineering,Sichuan University,Chengdu 610065,China);Experiment on Dynamic Rock Facture Toughness Using Edge-notched Disc Specimen[J];Journal of Yangtze River Scientific Research Institute;2006-02
4 WANG Feng,HUANG Qi-qing,YIN Zhi-ping(Institute of Aeronautics,Northwest Polytechnical University,Xi′an 710072,China);Analysis of Emulational Limited Element Method for the Three-dimensional Stress Intensity Factors[J];Aeronautical Computing Technique;2006-03
5 GAO Yuan,GONG Neng-ping,LUO Yufan(Institute of Applied Mechanics,Anhui University of Science and Technology,Huainan Anhui 232001,China);Experimental Study on Dynamic Fracture Toughness of Rock[J];Journal of Anhui University of Science and Technology(Natural Science);2012-01
6 Man Ke1,2 Zhou Hongwei1(1.China University of Mining and Technology,Beijing;2.Swiss Federal Institute of Technology Lausanne(EPFL));Dynamic Force Balance Analysis of SHPB System[J];Metal Mine;2010-11
7 CHEN HuaYan ZENG XiangGuo QIAN XiaoJun WANG QingYuan XU ShuSheng(Department of Civil Engineering and Mechanics,Sichuan University,Chengdu 610065,China);NUMERICAL STUDY IN THE EFFECT OF THE INCIDENT BAR SHAPE IN HOPKINSON PRESSURE BAR ON DYNAMIC FRACTURE PARAMETERS[J];Journal of Mechanical Strength;2011-01
8 ZHOU Wei-jiang WANG Sheng-nan (Department of Construefural Engineering,Northwestern Palyteclmical Universty,Xr'an 710072,P.R.China);Application of ANSYS in Computing Three Dimensional Dynamic Stress Intensity Factors[J];Science Technology and Engineering;2007-09
9 ZENG Xiangguo1,WANG Qingyuan1,YAO Jie1,LI Jianjun2(1.College of Architecture and Environment,Sichuan University,Chengdu,Sichuan 610065,China;2.College of Resources and Environmental Science,Chongqing University,Chongqing,400044,China);FINITE ELEMENT CALCULATION OF FRACTURE PARAMETERS OF BRAZILIAN DISK WITH PRE-EXISTING CRACK UNDER IMPACT LOADING[J];Chinese Journal of Rock Mechanics and Engineering;2007-S1
10 ZHANG Sheng,WANG Qi-zhi(Dept.of Civil Eng.and Applied Mechanics,Sichuan University,Chengdu 610065,China);Method for determination of dynamic fracture toughness of rock using holed-cracked flattened disk specimen[J];Chinese Journal of Geotechnical Engineering;2006-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 CHEN Ze-yu,LU Wen-ge,DU Jian-hui (Fac.of Elec.Engn.,Guangdong University of Technology,Guangzhou 510090,China);A new criterion for crack propagation based on strain energy along radius from crack-tip within plastic zone[J];Journal of Anhui University of Technology and Science;2005-04
2 CUI Xinzhong,FAN Yafu,JI Wei,CHEN Jie(Ningbo Branch of China Academy of Ordnance Science,Yantai 264003,China);Progress in the research of dynamic fracture toughness based on Hopkinson bar technique[J];Ordnance Material Science and Engineering;2010-02
3 ZHANG Sheng1,2,WANG Qi-zhi1,3,XIE He-ping1(1.Department of Civil Engineering and Applied Mechanics,Sichuan University,Chengdu 610065,Sichuan,China;2.Department of Mining Engineering,Henan Polytechnic University,Jiaozhuo 454001,Henan,China;3.State Key Laboratory of Hydraulics and Mountain River Engineering,Chengdu 610065,Sichuan,China);Size effect of rock dynamic fracture toughness[J];Explosion and Shock Waves;2008-06
4 SHANG Bing1,2,HU Shi-sheng2,JIANG Xi-quang2,3(1.School of Aerospace and Aeronautics,Tsinghua University,Beijing 100084,China;2.University of Science and Technology of China,Hefei 230026,Anhui,China;3.Artillery Academy,Hefei 230027,Anhui,China);A three-wave coupling method for data treatment in SHPB experiments with metal samples[J];Explosion and Shock Waves;2010-04
5 LIU Qiang1,WANG Fang1,HUANG Xiao-ping1,CUI Wei-cheng2 (1 School of Naval Architecture,Ocean and Civil Engineering,Shanghai Jiao Tong University,Shanghai 200030,China;2 China Ship Scientific Research Center,Wuxi 214082,China);Three dimensional FE analysis of the plastic zone size near the crack tip[J];Journal of Ship Mechanics;2006-05
6 WU Rui-feng,HUANG Xiao-ping(State Key Lab of Ocean Engineering,Shanghai Jiao Tong University,Shanghai 200240,China);Prediction of crack growth of surface crack at bracket toe of ship under random wave loading condition[J];Journal of Ship Mechanics;2012-05
7 CAO Maosheng1,2, ZHANG Tiefu2, LIU Ruitang2, ZHU Jing1(1. School of Material Science and Engineering, Tsinghua University, Beijing 100084, China; 2. Department of Material Science and Engineering, Harbin Engineering University, Harbin 150001, China);A study of the method for dynamic fracture toughness testing of laminated composites by SHPB technique[J];Material Science and Technology;2002-04
8 CHEN Ze-yu,GONG Ling-yun(Department of Electromechanical Engineering,Guangzhou Institute of Railway Technology,Guangzhou 510430,China);A Normalized Criterion for Crack Propagation Based on the Radial Strain Energy in Plastic Core Region of Crack-tip[J];Journal of Materials Science and Engineering;2011-06
9 DONG Yu-wen1,REN Qing-wen2(1.School of River & Ocean Engineering,Chongqing Jiaotong University,Chongqing 400074,China;2.School of Civil Engineering,Hehai University,Jiangsu Nanjing 210098,China);Study on Numerical Simulation of Crack Growth of Concrete Based on XFEM[J];Journal of Chongqing Jiaotong University(Natural Science);2009-01
10 ZHAO Lian-hua(Tieling Normal College,Tieling 112001,China);Finite Element Analysis of Three-dimensional Stress State of Cracking Tip for Stretch Slab[J];Journal of Changshu Institute of Technology;2007-02
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Yu Yalun(University of Scince & Technology Beijing)Jin Kexue (Baotou Institute of Iron & Steel Techology);STUDIES ON THE DYNAMIC BEHAVIOR OF MAGNETITES AND GRANITE UNDER HIGH STRAIN RATES[J];Explosion and Shock Waves;1990-03
2 Hu Shisheng Guo Yong Hu Xiuzhang Chen Dehua (University of Science &. Technology of China,Hefei 230026)Zhang Xiaowu (East China Institute of Technology, Nan jing 210014);STUDIES OF DYNAMIC MECHANICAL PROPERTIES OF DU ALLOYS[J];Explosion and Shock Waves;1993-01
3 Li Yulong Liu Yuanyong (Department of Aircraft Engineering Northwester. Pdytechnical University,Xian, 710072);CALCULATION OF DSIF OF THREE POINT BENDING SPECIMEN USING THE METHOD OF DCOD[J];Explosion and Shock Waves;1993-03
4 XU Mingli1,2, ZHANG Ruoqi1,2, ZHANG Guangying2(1.Science College, National University of Defense Technology,Changsha 410073, Hunan, China;2.Laboratory for Shock Wave and Detonation Physics Research, Institute of Fluid Physics,China Academy of Engineering Physics, Mianyang 621900, Sichuan, China);Analysis of early stage specimen stress equilibrium in SHPB experiment[J];Explosion and Shock Waves;2003-03
5 WANG Li-li~(1,2), WANG Yong-gang~(1,2)(1. Mechanics and Materials Science Research Center, Ningbo University, Ningbo315211, Zhejiang, China;2. Laboratory for Shock Wave and Detonation Physics Research, Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang621900, Sichuan, China);The important role of stress waves in the study on dynamic constitutive behavior of materials by SHPB[J];Explosion and Shock Waves;2005-01
6 SONG Li*, HU Shi-sheng (Department of Mechanics and Mechanical Engineering, University of Science and Technology of China, Hefei230026, Anhui, China);Stress uniformity and constant strain rate in SHPB test[J];Explosion and Shock Waves;2005-03
7 LI Yu-long~1,SUO Tao~1,GUO Wei-guo~1,HU Rui~2,LI Jin-shan~2,FU Heng-zhi~2(1.School of Aeronautics,Northwestern Polytechnical University,Xi'an710072,Shaanxi,China;2.School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an710072,Shaanxi,China);Determination of dynamic behavior of materials at elevated temperatures and high strain rates using Hopkinson bar[J];Explosion and Shock Waves;2005-06
8 LI Yu-long ,GUO Wei-guo (Department of Aircraft Structure Engineering,School of Acranautics,Northwerstern Polytechnical University,xi'an710072,Shaanxi,China;);Miniature-Hopkinson bar technique[J];Explosion and Shock Waves;2006-04
9 ZHU Jue~(1,2),HU Shi-sheng~1,WANG Li-li~(2,1)(1.Department of Mechanics and Mechanical Engineering,University of Science and Technology of China,Hefei 230026,Anhui,China;2.Mechanics and Material Science Research Center,Ningbo University,Ningbo 315211,Zhejiang,China);Analysis on stress uniformity of viscoelastic materials in split Hopkinson bar tests[J];Explosion and Shock Waves;2006-04
10 Li Yulong;Guo Weiguo;Jia Dexin;Liu Yuanyong(Northwestern Polytechmical University, Xi' an, 710072)Luo Jingrun;Du Jun;Chen Yuze(Southuest Institute of Structural Mechanics, Chengdu, P.O.Box 521, 610003);EXPERIMENTAL MEASUREMENT OF DYNAMIC FRACTURE INITIATION TOUGHNESS OF 40Cr STEEL[J];EXPLOSION AND SHOCK WAVES;1996-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved