Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Ordnance Industry Automation》 2017-11
Add to Favorite Get Latest Update

Analysis for J-integral of Thin Plate with Crack Based on Surface Nanocrystallization Technology

Guo Jingwei;Center of Ammunition Charging,Automation Research Institute of China South Industries Group Corporation;  
J-integral is the parameters of stress and strain fields near the crack tip.The smaller the J-integral,the less chance to extend the crack is.In this paper,the treatment is taken on the thin plate with crack by the surface self-nanocrystallization,which can improve mechanical property of the material.316L stainless steel is being used as the basic material.And the simulation software of ABAQUS is being used to make a simulated calculation to get the results of J-integral near the crack tip.The results show that the J-integral near the crack tip of the thin plate with crack is obviously reduced after part of surface being disposed by nanocrystallization.Then,comparing different methods being taken on the structure,the best way is that the ellipse area near the crack tip being disposed by nanocrystallization,the others keep raw material.And the long axis of the ellipse is perpendicular to the crack.
【CateGory Index】: O346.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved