Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of University of Science and Technology Beijing》 2008-11
Add to Favorite Get Latest Update

Three-dimensional surface flexible roll bending technology and its numerical simulation

GONG Xuepeng,LI Mingzhe,HU Zhiqing Dieless Forming Technology Center,Jilin University,Changchun 130022,China  
Three-dimensional surface flexible roll bending was introduced and compared with traditional roll bending and multi-point forming.The flexible roll bending equipment was researched and the corresponding experimental equipment was developed.A finite element model of flexible roll bending was established to simulate the forming process and satisfactory simulated results were gained.The flexible roll bending of sheet metals made of two kinds of materials was simulated and their different forming effects were analyzed.
【Fund】: 国家自然科学基金资助项目(No.50575090);; 吉林大学“985工程”资助项目
【CateGory Index】: TG306
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 3 Hits
1 DENG Yu-shan1,LI Ming-zhe1,GONG Xue-peng2,HU Zhi-qing1(1.Dieless Forming Technology Research Center,Jilin University,Changchun 130022,China;2.Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130022,China);Numerical simulation on impact of 3D surface flexible roll forming process by sheet's thickness[J];Forging & Stamping Technology;2010-04
2 Sui Zhou;Cai Zhongyi;Wang Mi;Li Mingzhe;College of Materials Science and Engineering,Jilin University;;Research on finite element modeling method of continuous flexible roll forming process[J];Journal of Huazhong University of Science and Technology(Natural Science Edition);2014-06
3 LI Ren-jun;LI Ming-zhe;Dieless Forming Technology Center,Jilin University;;Research progress of 3D surface continuous flexible forming methods[J];Journal of Plasticity Engineering;2013-05
【Citations】
Chinese Journal Full-text Database 1 Hits
1 Li Ming-zhe,Hu Zhi-qing,Cai Zhong-yi,Gong Xue-peng(Dieless Forming Technology Center,Jilin University,Changchun 130022,China);Method of efficient continuous plastic forming for freeform surface part[J];Journal of Jilin University(Engineering and Technology Edition);2007-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIU Chun-guo,LI Ming-zhe,WEI Shi(Roll-forging Research Institute,Jilin University,Changchun 130022,China);Research on flexible rotary forging using multi-point adjusting method[J];Forging & Stamping Technology;2009-05
2 LI Mingzhe,CUI Xiangji,DENG Yushan,ZHANG Qingfang (Dieless Forming Technology Center,Jilin University,Changchun 130025,Jilin China);The Current Status and Developing Tendency of Multi-point Forming Technique[J];China Metal Forming Equipment & Manufacturing Technology;2007-05
3 HU Zhiqing, LI Mingzhe, GONG Xuepeng (Dieless Forming Technology Center,Jilin University,Changchun 130025,Jilin China);Study for the New Flexible Forming Equipment of Three-dimension Parts[J];China Metal Forming Equipment & Manufacturing Technology;2007-06
4 GONG Xuepeng, LI Mingzhe, HU Zhiqing (Dieless Forming Technology Center, Jilin University, Changchun 130022, Jilin China);Research on the Continual Multi-point Forming Equipment[J];China Metal Forming Equipment & Manufacturing Technology;2008-01
5 GONG Xue-peng,LI Ming-zhe,HU Zhi-qing(Dieless Forming Technology Research Center,Jilin University,Changchun 130022,China);Numerical simulation of three-dimensional surface bending by using bendable roller[J];Journal of Jilin University(Engineering and Technology Edition);2008-06
6 CAI Zhong-yi,LI Ming-zhe,LAN Ying-wu,HU Zhi-qing(Roll Forging Research Institute,Jilin University,Changchun 130022,China);Shape control of 3-dimensional curved surface part in continuous forming[J];Journal of Jilin University(Engineering and Technology Edition);2011-04
7 SUI Zhou,CAI Zhong-yi,LAN Ying-wu,LI Ming-zhe(Roll Forging Institute,Jilin University,Changchun 130022,China);Shape control model for three-dimensional surface part in continuous flexible forming process[J];Journal of Jilin University(Engineering and Technology Edition);2013-05
8 HU Zhi-qing LI Ming-zhe GONG Xue-peng(Dieless Forming Technology Center,Jilin University,Changchun 130025 China);The continuous flexible method for forming the three-dimension surface parts[J];Journal of Plasticity Engineering;2008-01
9 LI Ren-jun;LI Ming-zhe;Dieless Forming Technology Center,Jilin University;;Research progress of 3D surface continuous flexible forming methods[J];Journal of Plasticity Engineering;2013-05
10 WANG Zhen-xiao;ZHAO Yi-xi;KONG Qing-shuai;YU Zhong-qi;Shanghai Key Laboratory of Digital Manufacture for Thin-Walled Structures,Shanghai Jiaotong University;;Controlling Method for Edge Wave in Flexible Roll Forming[J];Journal of Shanghai Jiaotong University;2014-05
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 FAN Li,TAN Nan-lin,SHEN Dong-ping (School of Mechanical and Electronic Control Engineering,Beijing Jiaotong University,Beijing 100044,China);FEA on Stress Field of Rolling Element Bearing Based on Explicit Dynamics[J];Journal of Beijing Jiaotong University;2006-04
2 Han Zhiwu Nie Yuqin(Jilin University, Changchun, 130025) Liu Cai(Hebei Academy of Science)Ren Luquan(Jilin University);ANALYSIS OF THIN PLATE BY ELASTO-PLASTIC LARGE DEFLECTION SPLINE FINITE STRIP METHOD[J];Acta Armamentarii;2002-01
3 Cui Xiangji Cai Zhongyi Li Mingzhe (Roll Forging Research Institute, Jilin University, Changchun,130025);THEORY AND METHOD FOR THE MULTI-POINT FORMING OF 3D SHEET METAL PARTS[J];Acta Armamentarii;2002-04
4 Yan Jing Zuo Dunwen Wang Min (College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing, 210016);A THEORETICAL ANALYSIS ON THE SPRINGBACK OF WORKPIECE DURING TWO-AXLE BENDING[J];Acta Armamentarii;2003-03
5 ZHU Xu-mei,ZHANG Huai-cun(Department of Mechanical Engineering,Beijing Institute of Machinery,Beijing 100085,China);Finite element analysis for twice metal formings[J];Journal of Beijing Institute of Machinery;2006-04
6 Zhang Yanmin Zhou Xianbin(School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Optimization of loading trajectory for skin stretch forming process[J];Journal of Beijing University of Aeronautics and Astronautics;2007-07
7 Han Jinquan Wan Min (School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100191,China) Yuan Sheng Xu Xudong(Department of Manufacturing,Chengdu Aircraft Industrial(Group) Co.Ltd.,Chengdu 610092,China);Design method for surface of stretching tool for complex aircraft skin[J];Journal of Beijing University of Aeronautics and Astronautics;2008-11
8 Wang Lili Li Dongsheng Li Xiaoqiang Luo Hongyu(School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Die-face compensation algorithm in stretch forming of aircraft skin over reconfigurable compliant tooling[J];Journal of Beijing University of Aeronautics and Astronautics;2011-08
9 Wan Min Zhou Xianbin Li Xiaoxing (Beijing University of Aeronautics and Astronautics,School of Mechanical Engineering and Automation) Wu Hui (Chengdu Aircraft Industrial Corporation, Chief Technologist Office);Effects of Stretching Conditions on Forming Quality of Mirror Skins[J];Journal of Beijing University of Aeronautics and Astronautics;1998-06
10 Guan Kezhi, Zhou Jihua, Zhu Qisheng, Sun Shihui;An Experimental study of the Resistance to plastic Deformation of Hot Rolling Metals[J];;1983-01
【Secondary References】
Chinese Journal Full-text Database 7 Hits
1 CHEN Lan1,ZHANG Xin-zhou1,SUN Yu1,CHANG Xin2,YANG Shu-tian2,(1.School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China; 2.Tai`an Hualu Metalforming Machine Tool Co.,Ltd.,Taian 271000,China);Numerical simulation of bending process for large marine bending machine[J];Forging & Stamping Technology;2011-05
2 LI Renjun;LI Mingzhe;CAI Zhongyi;Dieless Forming Technology Center,Jilin University;;Device design and forming technology analysis for surface flexible rolling[J];Materials Science and Technology;2014-04
3 Sui Zhou;Cai Zhongyi;Wang Mi;Li Mingzhe;College of Materials Science and Engineering,Jilin University;;Research on finite element modeling method of continuous flexible roll forming process[J];Journal of Huazhong University of Science and Technology(Natural Science Edition);2014-06
4 WANG Mi;CAI Zhongyi;LI Linlin;LI Mingzhe;Roll Forging Research Institute,Jilin University;;Research of the critical friction coefficient in achieving continuous flexible forming[J];Journal of Harbin Engineering University;2014-07
5 SUI Zhou CAI Zhong-yi LI Ming-zhe(Rolling Forging Institute of Jilin University,Changchun 130022 China);Mutual influence between longitudinal and transverse curvatures in continuous flexible forming process[J];Journal of Plasticity Engineering;2013-01
6 LI Ren-jun;LI Ming-zhe;Dieless Forming Technology Center,Jilin University;;Research progress of 3D surface continuous flexible forming methods[J];Journal of Plasticity Engineering;2013-05
7 SU Shaojuan1,HU Yong2,WANG Chengfang2(1.Transportation Equipments and Ocean Engineering College,Dalian Maritime University,Dalian 116026,China; 2.School of Transportation,Wuhan University of Technology,Wuhan 430063,China);Research Progress of Three-Dimensional Plate Forming Methods for Ship Hull[J];Shipbuilding of China;2012-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved