Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of University of Science and Technology Beijing》 2011-12
Add to Favorite Get Latest Update

Electrochemical corrosion performance of continuous columnar-grained BFe10-1-1 alloy

GAN Chun-lei,LIU Xue-feng,HUANG Hai-you,XIE Jian-xin Key Laboratory for Advanced Materials Processing(Ministry of Education),University of Science and Technology Beijing,Beijing 100083,China  
The corrosion resistance of BFe10-1-1 alloy with continuous columnar-grained microstructure in a 3.5% NaCl solution was investigated by means of polarization tests and electrochemical impedance spectroscopy(EIS),and compared with that of BFe10-1-1 alloy with conventional polycrystalline microstructure fabricated by conventional casting.Polarization test results show that both BFe10-1-1 alloys have similar electrochemical behavior,and their polarization curves include three distinct regions,that is,the active dissolution region,the active-passive transition region and the limiting current region.However the corrosion rate of BFe10-1-1 alloy with continuous columnar-grained microstructure is lower than that of the one with conventional polycrystalline microstructure,as less microsegregation in BFe10-1-1 alloy with continuous columnar-grained microstructure can effectively avoid interdendritic corrosion.EIS spectra indicate that BFe10-1-1 alloy with continuous columnar-grained microstructure has a higher charge transfer resistance and a higher corrosion product film resistance compared with BFe10-1-1 alloy with conventional polycrystalline microstructure.The results further demonstrate that BFe10-1-1 alloy with continuous columnar-grained microstructure has a better corrosion resistance.
【Fund】: 国家自然科学基金资助项目(50674008);; 国家科技支撑计划资助项目(2011BAE23B00);; 中央高校基本科研业务费资助项目(FRF-TP-10-002B);; 国家重点基础研究发展计划资助项目(2011CB606300)
【CateGory Index】: TG146.11
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 5 Hits
1 CHEN Hai-yan(School of Materials and Energy Sources,Guangdong University of Technology,Guangzhou 510006,China);Pitting Corrosion Behavior of BFe30-1-1 Alloy in NaCl Solution[J];Materials Protection;2007-06
2 ZHAO Weimin WANG Yong School of Mechanical Engineering,China University of Petroleum,Dongying 257061;EIS STUDY ON THE EFFECTS OF HEAT TREATMENT ON CORROSION BEHAVIOR OF NICKEL BASE ALLOY COATING ON LOW CARBON STEEL[J];Acta Metallurgica Sinica;2008-09
3 GAN Chunlei,LIU Xuefeng,HUANG Haiyou,XIE Jianxin Key Laboratory for Advanced Materials Processing(Ministry of Education),University of Science and Technology Beijing, Beijing 100083;FABRICATION PROCESS,MICROSTRUCTURE AND MECHANICAL PROPERTIES OF BFe10-1-1 ALLOY TUBES BY CONTINUOUS UNIDIRECTIONAL SOLIDIFICATION[J];Acta Metallurgica Sinica;2010-12
4 Fu Yabo1,2,Yan Zhiming1,Zheng Yi3,Chen Ping2,Cheng Yanfeng2,Yuan Chengren1,Yin Guomao1,Li Tingju1(1.School of Materials Science and Engineering,Dalian University of Technology,Dalian,China;2.Copper Tube Plant of Jinchuan Group Ltd.,Jinchuan,China;3.School of Control Science and Engineering,Shandong University,Jinan,China);Key Procedures in Cast-rolling Cupronickel Condenser[J];Special Casting & Nonferrous Alloys;2009-05
5 CHEN Qin,CHEN Ping(Jinchuan Copper Tube Factory,Jinchang 737100,China);Study of Production Process for BFe10-1-1 Casting Ingot[J];Shanghai Nonferrous Metals;2009-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIU Jian-hua,HAO Xue-long,LI Song-mei,YU Mei,WANG Zong-wuKey Laboratory of Aerospace Materials and Performance(Ministry of Education of China),School of Materials Science and Engineering,Beihang University,Beijing 100191,China;Corrosion electrochemical behavior of electron beam welding joints of AF1410 steel[J];Journal of University of Science and Technology Beijing;2010-11
2 ZHOU Yong-feng,WANG Hong-ren(1.Wuhan No.2 Ship Design Research Institute,Wuhan 430064,China;2.Luoyang Ship Material Research Institute,Luoyang471039,China;3.State Key Laboratory for Marine Corrosion and Protection,Qingdao 266071,China);Review of Research on the Environmental Corrosion of Ship Seawater Systems[J];Development and Application of Materials;2008-03
3 ZHANG Yu-bin, SU Chang-wei, ZHANG Chang-ke, ZHOU Jun, HE Feng-jiao College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082, China;Microstructure of Ni–Fe alloy and its corrosion behavior in 3.5% NaCl solution[J];Electroplating & Finishing;2009-12
4 XU Qun-jie,Huang Shi-jun(School of Thermal Power & Environmental Engineering,Shanghai University of Electric Power,Shanghai 200090,China);Progress in Research on Corrosion Inhibition of Cupronickel Alloy[J];Journal of Shanghai University of Electric Power;2007-02
5 DU Juan1,2,WANG Hong-ren2,DU Min1,LI Hai-tao21.College of Chemistry and Chemical Engineering,Ocean University of China,Qingdao 266003;2.State Key Laboratory for Marine Corrosion and Protection,Luoyang Ship Material Research Institute,Qingdao 266071;ELECTROCHEMICAL CORROSION BEHAVIOR OF 90/10 Cu-Ni ALLOY IN FLOWING SEAWATER[J];Corrosion Science and Protection Technology;2008-01
6 YU Junwu,LIU Xuefeng,XIE Jianxin Key Laboratory for Advanced Material Processing(Ministry of Education),University of Science and Technology Beijing, Beijing 100083;STUDY OF DYNAMIC RECRYSTALLIZATION OF A Cu-BASED ALLOY BFe10-1-1 WITH CONTINUOUS COLUMNAR GRAINS[J];Acta Metallurgica Sinica;2011-04
7 MA Quanshan1,HAO Weixin2,GENG Guihong1,YU Yangdong2(1.College of Materials,Beifang Ethnic University,Yinchuan 750021,China;2.College of Materials,Taiyuan University of Science and Technology,Taiyuan 030024,China);Solidification Microstructure Evolution of Highly Undercooled BFe30-2 Alloy[J];Hot Working Technology;2010-07
8 XIN Baoliang,LUO Zongqiang,ZHANG Weiwen,LI Yuanyuan(School of Mechanical & Automotive Engineering,South China University of Technology,Guangzhou 510640,China);Study on Wear Resistant Behavior of Multicomponent Cu-Ni-Al Alloy[J];Hot Working Technology;2011-02
9 MA Quan-shan1,HAO Wei-xin2,GENG Gui-hong1,YU Yang-dong2(1.Department of Materials,Beifang Ethnic University,Yinchuan 750021,China;2.Department of Materials,Taiyuan University of Science and Technology,Taiyuan 030024,China);Microstructure Refinement Mechanism of Undercooled BFe30-2 Alloy[J];Foundry Technology;2010-05
10 CHEN Shu-ying,YUE Xu-dong,CHANG Guo-wei(School of Materials Science and Engineering,Liaoning University of Technology,Jinzhou 121001,China);Macro Segregation of Horizontal Continuous Casting Brass Blanks Produced Using Recycled Copper Scrap[J];Foundry Technology;2011-08
China Proceedings of conference Full-text Database 1 Hits
1 SUN Ting-ting1,2, XUE Jian-jun1, LI Ning2, LIU Feng2 (1. College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 211100, China; 2. State Key Laboratory for Marine Corrosion and Protection, Louyang Ship Material Research Institute, Qingdao 266071, China);Temperature effect on electrochemical behavior of 90/10 Cu-Ni alloy in simulate seawater[A];[C];2009
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 LIU Xue-feng,RONG Ming-lei,MA Sheng-jun,XIE Jian-xin(School of Materials Science and Engineering,University of Science and Techonlogy Beijing,Beijing 100083,China);Preparation of Pure Copper Plates with Continuous Columnar Crystals[J];Journal of Materials Engineering;2007-09
2 ZHOU Wenlong 1 ,XU Yi 1 ,ZHANG Shihong 1 ,YU Chuanfu 2 ,Jiang Qiang 2 ,Zhang Jinli 2 (1.Institute of Metal Research,Chinese Academy of Sciences,Shenyang11 0016,Liaoning China;2.Engineering Research Centre for Precision Copper T ubes Chinese Academy of Sciences,Xinxiang453000);Comparisons & Analyses of the Microstructure & Mechanical Properties for TP2 Copper Tubes Produced by Cast-roll Processes & Extrusion Processes[J];;2004-01
3 ZHAO Wei-min 1,2 ,WANG Yong 2,XUE Jin 1,WU Kai-yuan 2(1.School of Material Science and Engineering,Xi’an Jiaotong University,Xi’an 710049,China;2.School of Mechanical and Electrical Engineering,University of Petroleum,Dongying 257061,Shandong,China).;Corrosion failure process of NiCrBSi coatings deposited by high ve-locity oxyfuel[J];Transactions of The China Welding Institution;2005-01
4 ZHAO Weimin, WANG Yong, XUE Jin, WU KaiyuanSchool of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an 710049School of Mechanical and Electrical Engineering, University of Petroleum, Dongying 257061;EIS STUDY OF THE CORROSION FAILURE PROCESS OF STEEL COATED BY NICKEL BASE ALLOY[J];Acta Metallrugica Sinica;2005-02
5 CHEN Ping1,3,FU Ya-bo2,3(1.Kunming University of Technology,Kunming 650000,China;2.Lanzhou University of Technology,Lanzhou 730000,China;3.Copper Tube Factory of Jinchuan Group,Jinchang 737104,China);Market Analysis of Condensation Tubes of Cu-Ni Alloy[J];Shanghai Nonferrous Metals;2007-04
6 YU Ye-qiu,ZHAO Feng,LI Wo-guang(College of Material & Energy Sources,Guangdong University of Technology,Guangzhou 510006,China);Microstructure and Performance of BFe30-1-1 Cupronickel Tubes[J];Hot Working Technology;2005-11
7 Yu Yeqiu Zhao Feng Li Woguang (Guangdong University of Technology,Guangzhou,China);Manufacturing of BFe30-1-1 Cupronickel Tubes by Heated Mold Continuous Casting[J];Special Casting & Nonferrous Alloys;2005-12
8 Xiao Han1,2,Zhang Shihong1,Zhang Haiqu3,Zhang Xingguo2(1.Institute of Metal Research,Chinese Academy of Science,Shenyang,China;2.School of Materials Science and Engineering,Dalian University of Technology,Dalian,China;3.School of Mechanical Engineering,Shenyang University,Shenyang,China);Surface Cracks in TP2 Copper Tube Billets in Horizontal Continuous Casting[J];Special Casting & Nonferrous Alloys;2007-11
9 Yan Zhiming1,2,Li Xintao1,3,Luo Dawei1,Liu Jidong1,Zhang Hongliang1,Cao Zhiqiang1,2,Li Tingju1,2(1.School of Materials Science and Engineering,Dalian University of Technology,Dalian,China;2.State Key Laboratory for Materials Modification by Laser,Ion and Electron Beams,Dalian University of Technology,Dalian,China;3.Gaoxin Zhangtong Co.,Ltd,Zhangjiagang,China);Horizontal Continuous Casting BFe10-1-1 Alloy Billets[J];Special Casting & Nonferrous Alloys;2009-02
10 Li Bing1*,Zhang Shihong1,2,Zhang Jinli2,Liu Jinsong1,Zhang Haiqu1(1.Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China;2.Engineering Research Center for Precise Copper Tubes,Chinese Academy of Sciences,Xinxiang 453000,China;3.School of Mechanical Engineering,Shenyang University,Shenyang 110044,China);Simulating Optimization and Experimental Research on Three-Roll Planetary Rolling Process of B10 Copper Alloy Tube[J];Chinese Journal of Rare Metals;2006-S1
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved