Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Chinese Journal of Engineering》 2017-12
Add to Favorite Get Latest Update

Roll profile electromagnetic control process parameters in precision rolling mill

DU Feng-shan;LIU Wen-wen;FENG Yan-feng;SUN Jing-na;National Engineering Research Center for Equipment and Technology of Cold Strip Rolling,Yanshan University;  
To achieve micro-scale roll gap shape adjustment,roll profile electromagnetic control technology was proposed and a Ф270 mm × 300 mm roll profile electromagnetic control experimental platform was designed and built. Meanwhile,a mathematical model based on electromagnetic,thermal and mechanical coupled parameters was established. The results of both the experiment and simulation were compared and analyzed under the same process conditions. The comparison shows that the experimental and simulated results are in the agreement,thus verifying the model. Based on the simulated results,the roll crown and the roll crown growth rate changing with heating time were calculated under different equivalent current densities and frequencies. The influence of current density,frequency and heating time on the roll profile curve was presented. In addition,reasonable technological parameters were used in order to avoid local overheating of the electromagnetic stick and further facilitate adjustment of the roll crown.
【Fund】: 国家自然科学基金重点资助项目(U1560206);国家自然科学基金资助项目(51374184)
【CateGory Index】: TG333
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved