The Coordinate Design of the Central Line Spacing and the Longitudinal Dimension of the Channel of Regenerator
TANG Fuheng;Technical center of Beijing great wall industrial furnace;
The design of the central line spacing of the port and the design of the canal dimension of the regenerator in the past are introduced respectively. It is pointed out that the space between the checks and the dividing wall is too large. It is proposed that the coordinate design of the central line spacing and the longitudinal dimension of the channel of regenerator must be carried out. The procedure and steps of coordinate design are also given. The demonstration coordinate design calculation of central line spacing of the port and the longitudinal dimension of the channel of regenerator with checks of cylindrical brick, lath block and cross brick was described by taking a newly built 700 t/d float glass furnace as an example.
【CateGory Index】： TQ171.623