Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Surface Engineerign》 2002-01
Add to Favorite Get Latest Update

Study on Structure and Properties of High Velocity Arc Spraying Ni-Al intermediate Coating

LIANG Xiu-bing Ma Shi-ning  
High Velocity Arc Spraying technique is one of advanced thermal spraying technologies. It possesses the characteristics of super quality, high efficiency and low cost. In this paper, the microstructure and properties of Ni-Al coating were investigated. The adhesive strength of coating exceeded 40MPa, average micro-hardness was 210 HV, and coating surface roughness Ra was 13.1089 祄, The coating was composed of Ni-Al alloy and Ni、Al oxide, its porosity was 2.26%. It was proved that high velocity arc spraying Ni-Al coating is one of best intermediate coatings with high adhesive strength and fine structure.
【Fund】: 清华大学摩擦学国家重点试验室资助项目
【CateGory Index】: TG174.44
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 CHEN Ya-jun1,HAN Yong-mei2,DING Kun-ying1,et al.(1.College of Science,Civil Aviation University of China,Tianjin 300300,China;2.Research Institute of Tianjin Machinery & Electrie Industry Holding Group Company,Tianjin 300132,China);Influence of arc spraying parameters on the property of hardness of Ni-Cr-Al coating[J];Welding Technology;2009-01
【Citations】
Chinese Journal Full-text Database 1 Hits
1 Xu binshi; Liang Xiubing ;Ma Shining ;Liu Shican;Research on the Newly Developed High Velocity Arc Spray Gun[J];CHINA SURFACE ENGINEERIGN;1998-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Tian Baohong;Xu Binshi;Ma Shining;Liu Shican;Particle Atomizing Characteristic in High Velocity Arc Spray Process[J];CHINA SURFACE ENGINEERIGN;1999-01
2 Liu Guimin K.J. Kurzyd owski, Xu Binshi, K. Rozniatowski;Research on the Micro-properties of FeCrAl Coatings Prepared by Conventional Arc and High-velocity Arc Spraying Technologies[J];CHINA SURFACE ENGINEERIGN;1999-03
3 ZHU Zi-xin, XU Bin-shi, ZHANG Wei, DU Ze-yu;Numerical Modeling of Atomized Gas Velocity during High Velocity Arc Spraying[J];China Surface Engineerign;2002-01
4 ZHANG Jia-ying, ZHANG Wei, ZHU Shao-hua, XU Bin-shi;The Optimization of Arc Current and Voltage Parameters in High Velocity Arc Spraying Process[J];China Surface Engineering;2002-03
5 CHEN Yong-xiong,XU Bin-shi,XU Yi,WEI Shi-chen,LIU Yan ( State Key Laboratory for Remanufacturing,The Academy of Armored Forces Engineering,Beijing 100072);Progress in Applying HVAS Technology to Maintenance & Remanufacture Engineering[J];China Surface Engineering;2006-S1
6 HU Jun zhi 1, CHEN Xue rong 1, MA Shi ning 1, OU Zhong wen 2 (1. Department of Material Science and Engineering, Academy of Armored Force Engineering, Beijing 100072,China; 2.Logistical Engineering University of PLA,Chongqing 400041,China) [;Technical Optimization and Property Research on Intermetallic Matrix Composite Coating by High Velocity Arc Spraying[J];Surface Technology;2003-04
7 ZHU Zi-xin, LIU Yan, XU Bin-shi, MA Shi-ning, ZHANG Wei(Academy of Armored Forces Engineering, Beijing 100072, China);Influence of Heat Treatment on Microstructure and Wear Behavior of Fe-Al/WC Composite Coatings[J];Journal of Materials Engineering;2004-07
8 Xu Binshi Ma Shining Liu Shican Zhu shaohua Liang Xiubing;Progress of Surface Engineering and Remanufacture Engineering in the New Century[J];China Surface Engineerign;2001-01
9 Xu Binshi Ma Shining Zhang Zhenxue (National Plant Engineering Center for Production, Education & Research Surface Engineering Research Institute of CMES, Beijing 100072);SUPERIOR HIGH EFFICIENCY NEW ANTI CORROSION TECHNOLOGY—? IGH VELOCITY ARC SPRAY[J];CORROSION & PROTECTION;2000-10
10 XU Xiao-ping, MA Shi-ning, HU Jun-zhi (The Academy of Armored forces Engineering, Beijing 100072, China);Study on Property of Al Coating and Al-RE Coating Produced by High Velocity Arc Spraying[J];Surface Technology;2005-03
China Proceedings of conference Full-text Database 4 Hits
1 BinshiXU Shining Ma Zhenxue ZHANG National Plant Engineering Center for Production,Education & Research Beijing 100072 Surface Engineering Research Institute of CMES Beijing 100072;Superior High-efficiency New Anti-corrosion Technology—High Velocity Arc Spray[A];[C];1999
2 Liang Xiubing Xu Binshi Ma Shining (Armored Force Engineering Institute, Beijing, 100072);Study on Microstructure and Properties of High Velocity Arc Spray Coatings[A];[C];2001
3 Xu Binshi Ma Shining Liang Xiubing Dong Shiyun Armored Force Institute, Beijing, 100072;Expectation of Surface Engineering and Environment-protected Remanufacture Engineering[A];[C];2001
4 CHEN Yong-xiong, XU Bin-shi, XU Yi, WEI Shi-chen, LIU Yan ( State Key Laboratory for Remanufacturing, The Academy of Armored Forces Engineering, Beijing 100072);Progress in Applying HVAS Technology to Maintenance & Remanufacture Engineering[A];[C];2006
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Wei Guangyuan et al(Mechanization of Agriculture Science Research Institute of China) [;Flux Cored Wire and Welding Automation[J];ELECTRIC WELDING MACHINE;1998-01
2 DONG Li-xian1,WANG Yong1,SUN Jian-b o1,CHEN Yu-hua1,GAO Guang-yan2 (1.College of Mechanical and El ectronic Engineering,University of Petrole um,Dongying 257061,China; 2.Power Generati ng Machine Plant of Shengli Petroleum Ad ministration,Dongying 257032,China);Influence of Arc Spraying Parameters on Stability of Properties of 3Cr13 Coating[J];Pipeline Technique and Equipment;2005-01
3 ZHANG Jia-ying, ZHANG Wei, ZHU Shao-hua, XU Bin-shi;The Optimization of Arc Current and Voltage Parameters in High Velocity Arc Spraying Process[J];China Surface Engineering;2002-03
4 WU Lin1,WANG Yong1,DONG Li-xian1,DENG Hua-ling2(1.College of Mechanical and Electronic Engineering in the University of Petroleum,China,Dongying 257061;2.Research institute of electric power,China Jinan 257032);Influence of Arc Spraying Parameters on the Properties of JCW-B Coating[J];China Surface Engineering;2005-05
5 Wang Junying 1,Lin Huachun 2,Chen Dong 2,Yang Qizhi 3,Yang Guangyi 2 (1.Ordnance Engineering College,Shijiazhuang 050003, China) (2.Qingdao Institute of Architecture and Engineering, Qingdao 266033, China) (3.School of Mechanical Engineering, Jiangsu University,Zhenjiang 212013, China);Microstructure of WC/Ni60 Coating Made by Means of Vacuum Fusion Sintering[J];Development and Application of Materials;2003-01
6 ;Study of Self-Fusion Alloy Powder Spraying Coating[J];MATERIAIS PROTECTION;1996-04
7 DENG Shi jun(78);Meeting the Rising of Thermal Spraying[J];MATERIAIS PROTECTION;2000-01
8 Yuan zhijun;Application of Steel Hot Weld in Repairing Model[J];TOOL ENGINEERING;2000-10
9 YUAN Zi-liang~1, MO Ya-wu~2 (1.Shaoyang College, Shaoyang 422004, China; 2.The College of Engineering in Hunan Agricultural University, Changsha 410128, China);Effect of Technological Parameter of Arc Spraying on Microstructures and Properties of Coating[J];Surface Technology;2005-03
10 San Jinfu; Du Zhi Tsing Hua UniversityBi Zhifu He Bei Research Center of Surface Technology;Effect of Spraying Parameters on Porosity and Oxides Content of Arc-sprayed Stainless Steel Coatings[J];CHINA SURFACE ENGINEERIGN;1997-03
China Proceedings of conference Full-text Database 1 Hits
1 Wanghangong, Zhabailin (The Second Artillery Engineering College, Xi'an, 710025; Xi'an JiaoTong University, Xi'an, 710049);Supersonic Thermal Spray Technology and Its Application[A];[C];2005
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved