Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Chongqing University of Technology(Natural Science)》 2013-01
Add to Favorite Get Latest Update

Characteristic Analysis and Experimental Research of a Biaxial Power Takeoff of Agriculture Vehicles

SHU Hong-yu1,CHEN Bo1,LIU Yu-zhi2,WANG Fa-quan2(1.College of Mechanical Engineering,Chongqing University,Chongqing 400044,China; 2.Public Information of Chongqing Agriculture Commission,Chongqing 401121,China)  
A new kind of biaxial power takeoff was designed for widespread technological issues such as high noise and difficult shift.Dynamic parameters of PTO were worked out,and solid modeling was built on that basis.The dynamic prompting for the torsion and vibration of dynamic gear engagement in multi-work condition is established and the parameterized simulation module is completed.The curve of gears meshing is simulated by imposing external force in the simulation model.The shifting forces were between 510 and 590 N by bench test which meets the requirement of the industrial standard.The problems of vibration and noise in the bench test were analyzed.Vibration acceleration and noise in the characteristic frequency were reduced significantly after improvement.
【Fund】: 国家自然科学基金资助项目(51275542)
【CateGory Index】: S229.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 ZHANG Wen-bo;HE Lin;JIANG Hong-wan;College of Mechanical Engineering,Guizhou University;;Present Status and Prospect of Power Take-Off Onagricultural Vehicle[J];Machinery Design & Manufacture;2015-03
【Citations】
Chinese Journal Full-text Database 5 Hits
1 ZHOU Wei,etc.(School of Engineer Technology, Changchun Vocational Institute of Technology, Changchun 130033,China);Research on analyzing method to impact characteristics of transmission gears[J];Journal of Changchun Institute of Technology(Natural Sciences Edition);2011-01
2 TANG Jinyuan 1,2 ZHOU Wei 1,2 CHEN Siyu 1,2(1.Key Laboratory of Modern Complex Equipment Design and Extreme Manufacturing of Ministry of Education,Central South University,Changsha 410083; 2.School of Mechanical and Electrical Engineering,Central South University,Changsha 410083);Contact-impact Analysis of Gear Transmission System[J];Journal of Mechanical Engineering;2011-07
3 WANG Jianjun LI Qihan LI Runfang Dept of Jet Propulsion, Beijing University of Aeronautics and Astronautics Beijing 100083, China Chongqing University, Chongqing 400044, China;RESEARCH ADVANCES FOR NONLINEAR VIBRATION OF GEAR TRANSMISSION SYSTEMS[J];Advances In Mechanics;2005-01
4 TANG Jin-yuan1, LIU Xin1, DAI Jin1,2(1. School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China;2. Hunan University of Technology, Zhuzhou 412000, China);STUDY ON CORNER CONTACT SHOCK OF GEAR TRANSMISSION BY ANSYS/LS-DYNA SOFTWARE[J];Journal of Vibration and Shock;2007-09
5 SHANG Jiao,FENG Hui-hua,LU Shou-wei,YANG Shi-qiu(School of Mechanical Engineering,Beijing Institute of Technology,Beijing 100081,China);Simulation research on dynamic performance for gear pair of main gear box in transmission of a car[J];Journal of Vibration Engineering;2010-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 YAO Qi-ping1,2,TANG Jin-yuan1,2(1.State Key Laboratory of High Performance Complex Manufacturing,Changsha 410083,China; 2.School of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China);Contact-impact analysis of hypoid gear with finite element method[J];Journal of Railway Science and Engineering;2011-04
2 YU Yin-xin1,YUAN Hui-qun2,ZHANG Liang1,LU Bing-wu3(1.School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110819,China;2.School of Sciences,Northeastern University,Shenyang 110819,China;3.Technology Center,China FAW Group Corporation,Changchun 130011,China.);Dynamic Characteristics Analysis Based on Finite Element for Automotive Transmission Coupling System[J];Journal of Northeastern University(Natural Science);2012-04
3 SHENG Guo-liang(Nanjing Research Institute of Electronics Technology,Nanjing 210013,China);Simulated Study on the Gear Gap Non-linear Dynamics Based on MATLAB[J];Electro-Mechanical Engineering;2008-05
4 LIN Teng-jiao,YANG Yan-ni,LI Run-fang,LI Ying-chao (State Key Laboratory of Mechanical Transmission,Chongqing Univercity,Chongqing 400030,P.R.China);Numerical simulation of the internal dynamic excitation of a spiral bevel gear transmission[J];Journal of Chongqing University;2009-06
5 BAI Hong-jin1,ZHANG Jin-mei1,YAO Jian-hao2(1.Jiaxing Vocational Technical College,Jiaxing Zhejiang 314036,China;2.Jiaxing Machinery Research Institute,Jiaxing Zhejiang 314001,China);Gear Noise Analysis and Noise Reduction Design[J];Equipment Manufacturing Technology;2010-01
6 YU Bi-qiang,LI Wei,XUE Jian-hua,JIANG Lei School of Mechanical Engineering,University of Science and Technology Beijing,Beijing 100083,China;Prediction of bending fatigue life for gears based on dynamic load spectra[J];Journal of University of Science and Technology Beijing;2013-06
7 TIAN Xing,LI Wei School of Mechanical Engineering,University of Science and Technology Beijing,Beijing 100083,China.;Study on Undercutting and Dynamic Performance for Asymmetric Helical Gear with Low-Number Teeth[J];Journal of Northeastern University(Natural Science);2013-07
8 ZHOU Jia-wei1,LIU Yu1,LIU Song-yong2,DU Chang-long2(1.School of Mechanical and Power Engineering,Henan Polytechnic University,Jiaozuo 454000,China; 2.School of Mechanical and Electrical Engineering,China University of Mining and Technology,Xuzhou 221008,China);Characteristic analysis of dynamic meshing for shearer walking mechanism[J];Chinese Journal of Engineering Design;2013-03
9 ZHANG Yi-min;LU Jin-chang;HU Peng;School of Mechanical Engineering & Automation, Northeastern University;;Non-linear Characteristics Analysis of Gear Pairs with the Impact of Rotational Speed and Torque[J];Journal of Northeastern University(Natural Science);2014-03
10 LIANG Ming-xuan;YUAN Hui-qun;LI Yan;YU Yin-xin;School of Mechanical Engineering & Automation,Northeastern University;School of Sciences,Northeastern University;;Simulation on 3-D Contact Nonlinear Dynamic Characteristic in Gearbox Coupling System[J];Journal of Northeastern University(Natural Science);2014-01
China Proceedings of conference Full-text Database 1 Hits
1 Li Guiyan Li Yinong (The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing, 400030);Influence of bearing stiffness and backlash on bifurcation and chaotic of spiral bevel gear transmission system[A];[C];2009
【Co-references】
Chinese Journal Full-text Database 9 Hits
1 ZHOU Wei,etc.(School of Engineer Technology, Changchun Vocational Institute of Technology, Changchun 130033,China);Research on analyzing method to impact characteristics of transmission gears[J];Journal of Changchun Institute of Technology(Natural Sciences Edition);2011-01
2 ZHANG Chongren;Summarization of Method in Lightweight for Construction Machinery[J];Construction Machinery Technology & Management;2012-04
3 LIU Qi-mao (Guangxi Institute of Technology,Liuzhou 545006,China);Structure optimization design for the automotive frame[J];Machinery Design & Manufacture;2005-04
4 TANG Jinyuan 1,2 ZHOU Wei 1,2 CHEN Siyu 1,2(1.Key Laboratory of Modern Complex Equipment Design and Extreme Manufacturing of Ministry of Education,Central South University,Changsha 410083; 2.School of Mechanical and Electrical Engineering,Central South University,Changsha 410083);Contact-impact Analysis of Gear Transmission System[J];Journal of Mechanical Engineering;2011-07
5 WANG Jianjun LI Qihan LI Runfang Dept of Jet Propulsion, Beijing University of Aeronautics and Astronautics Beijing 100083, China Chongqing University, Chongqing 400044, China;RESEARCH ADVANCES FOR NONLINEAR VIBRATION OF GEAR TRANSMISSION SYSTEMS[J];Advances In Mechanics;2005-01
6 ZHANG Xiao-kun,CHEN Xiao-feng,YIN Ming-gui(Datong Gear Co.Ltd,China National Heavy Duty Truck Group,Datong 037006,China);Transmission Box Lightweight Analysis Based on ANSYS Workbench[J];Mechanical Engineering & Automation;2010-05
7 WEI Jing1,2,SUN Qing-chao1,SUN Wei1,ZHAO Fei1,LI Yong-hong3,GUO Ai-gui3(1.School of Mechanical Engineering,Dalian University of Technology,Dalian 116024,China; 2.The State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400044,China; 3.Taiyuan Heavy Industry Co.,Ltd.,Taiyuan,030024,China);Dynamical coupling characteristics of a large wind turbine gearbox transmission system[J];Journal of Vibration and Shock;2012-08
8 SHANG Jiao,FENG Hui-hua,LU Shou-wei,YANG Shi-qiu(School of Mechanical Engineering,Beijing Institute of Technology,Beijing 100081,China);Simulation research on dynamic performance for gear pair of main gear box in transmission of a car[J];Journal of Vibration Engineering;2010-06
9 WEI Yong-jian;Design and Application of Electromagnetic Clutch-type Sandwich Power-Take-Off[J];Special Purpose Vehicle;2010-04
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Tian Fang (Department of Engineering, North China University of Technology, 100041. Beijing, China);Meshing Impacts of Gears with Double Circular-Arc Profile[J];Journal of North China University of Technology;1994-03
2 TIAN Zhu-you ,FENG Rong-tan ( Department of Mechanical Engineering, Beijing Institute of Machinery,Beijing 100085 ,China;School of Mechanical Engineering and Automatoin,University of Aeronautics and Astronautics,Beijing 100084 .China);Virtual machine of planetary gear drive[J];Journal of Beijing Institute of Machinery;2005-01
3 Tang Jinyuan; Xiao Limin (Mechanical Engineering Department);The Engagement Shock Velocity Calcutlation of Gear Top Modification[J];JOURNAL OF CHANGSHA RAILWAY UNIVERSITY;1995-01
4 LONG Kai,CHENG Ying (School of Vehicle and Transportation Engineering,Beijing Institute of Technology,Beijing 100081,China);The Research of Parameters by The Simulation of Exciting Force in Gears[J];Computer Simulation;2002-06
5 MA Qiu cheng,LUO Yi ning,HAN Lifen,NIE Song hiu (School of Mechanical Engineering,Xiangtan University,Xiangtan 411105,China;Methods of the Gear 3D Modeling and the Removing of Hatching on UG[J];Machine Design and Research;2001-01
6 Ye Youdong, Zhou Zhebo;Model Analysis of Involute Gear by Finite Element Method Based on ANSYS[J];Journal of Mechanical Transmission;2006-05
7 Zhang Feng, Li Zhao-qian, HUANG Chuan-zhen(School of Mechanical Engineering, Shandong University, Jinan 250061, China);The Research Status Quo and Development Trends of Parameterized Design[J];Mechanical Engineer;2002-01
8 SHAO Ren-ping,SUN Jin-cai, SHEN Yun-wen,JIA Pu-rong (Northwest Polytechnic University, Xi′an 710072);The Quantitative Prediction of Shock Noise from Gear Transmission[J];Mechanical Science and Technology;2001-03
9 WU Bao-lin1,YANG Su-jun1,YAO Jun-hong2 ( 1 Tianjin Polytechnic University,Tianjin 300160; 2 Dezhou Institute of Technology, Dezhou 253015);Theoretical Analysis on Meshing Impact of Involute Gears[J];Mechanical Science and Technology;2003-01
10 Wang Jianjun 1 Lu Mingwan Zhang Xiong Hong Tao Wu Renzhi ( 1 Tsinghua University,Peijing 100084);The Theory of Rattle Dynamics for Automotive Gearshift System[J];MECHANICAL SCIENCE AND TECHNOLOGY;1997-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved