Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Chongqing University of Technology(Natural Science)》 2013-01
Add to Favorite Get Latest Update

Numerical Investigation of Flow and Heat Transfer Characteristics of Effusion Plates with Stage Holes

ZHAO Xu-yang,ZHANG Bo,JI Hong-hu(College of Energy and Power Engineering, Nanjing University of Aeronautics & Astronautics,Nanjing 210016,China)  
Numerical simulation is adopted for the simplified laminated plate with effusion hole.The results have shown that the temperature of hot side was cooler than the plate with film hole,the heat flux in the hole was strengthened,and the flow rate in the hole was reduced for the step surface.
【CateGory Index】: V235.13
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 WANG Fei;ZHANG Bo;JI Hong-hu;LIU Hong-mei;ZHAO Chuan-liang;Key Laboratory of Aerospace Power System of Jiangsu Province,College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics;Shenyang Engine Design and Research Institute,Department of Combustion Chamber Design;;Influence of Flow and Heat Transfer Characteristics to Inclined Multi Holes Section Area Change in Holes[J];Journal of Chongqing University of Technology(Natural Science);2014-12
【Citations】
Chinese Journal Full-text Database 6 Hits
1 XU Quan-hong1,LI Tao1,XUE Hang2,LIN Yu-zhen1(1.National Key Laboratory on Aero-Engines,School of Jet Propulsion,Beijing University of Aeronautics and Astronautics,Beijing 100191,China;2.Market Department of China National Aero-Technology Import and Export Corporation,Beijing 100101,China);Convective heat transfer simulation in holes of inclined multihole wall film cooling[J];Journal of Aerospace Power;2009-05
2 ZHANG Bo1,LI Ji-bao2,JI Hong-hu1,SHANG Shou-tang2,CHENG Ming2,WANG Yan-li2 (1.College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;2.Shenyang Aeroengine Research Institute,Aviation Industry Corporation of China,Shenyang 110015,China);Effect of area ratio of impingement hole to effusion hole on heat transfer characteristics of impingement-effusion composite cooling[J];Journal of Aerospace Power;2009-10
3 YANG Cheng-feng,ZHANG Jing-zhou,YANG Wei-hua(College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China);Effect of the holes array arrangement on the full coverage film cooling characteristics[J];Journal of Aerospace Power;2010-07
4 ZHANG Bo1,JI Hong-hu1,YANG Fang-fang1,ZHENG Mei1,CHENG Ming2 (1.College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China; 2.System Engineering Department,Shenyang Aeroengine Research Institute, Aviation Industry Corporation of China,Shenyang 110085,China);Numerical investigation of heat transfer characteristics of effusion cooling and machinery film cooling combustors[J];Journal of Aerospace Power;2012-04
5 Song Bo,Lin Yuzhen,Liu Gaoen,Wang Huafang (4th Dept.Beijing University of Aeronautics and Astronautics,Beijing 100083);AN INVESTIGATION ON FILM COOLING EFFECTIVENESS OF INCLINED-MUTIHOLE WALLS WITH DIFFERENT PATTERNS[J];JOURNAL OF AEROSPACE POWER;1999-01
6 LIN Yu zhen, SONG Bo, LI Bin, LIU Gao en (The Thermal Power Institute, Beijing University of Aeronautics and Astronautics, Beijing\ 100083, China);INVESTIGATION OF ADIABATIC WALL EFFECTIVENESS OF THE INCLINED MULTIHOLE WALL FILM COOLING WITH DIFFERENT ANGLES TO THE WALL SURFACE[J];ACTA AERONAUTICA ET ASTRONAUTICA SINICA;1999-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Li Lei 1,Hou Naixian 2,Ao Liangbo 1,Wang Xinmei 1,Yue Zhufeng 1(1.Northwestern Polytechnincal University,Xi'an 710129,China)(2.AVIC Commercial Aircraft Engineer Co.LTD,Shanghai 030051,China);Crystallographic Behavior of Nickel Base Single Crystal Blades Film Cooling Holes under Different Hole Distances[J];Rare Metal Materials and Engineering;2013-03
2 WANG Fei;ZHANG Bo;JI Hong-hu;LIU Hong-mei;ZHAO Chuan-liang;Key Laboratory of Aerospace Power System of Jiangsu Province,College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics;Shenyang Engine Design and Research Institute,Department of Combustion Chamber Design;;Influence of Flow and Heat Transfer Characteristics to Inclined Multi Holes Section Area Change in Holes[J];Journal of Chongqing University of Technology(Natural Science);2014-12
3 HU Ya-ping,JI Hong-hu(College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing210016,China);Numerical Study of the Blowing Angle Effecton Effusi on Cooling Effectiveness[J];Journal of Aerospace Power;2005-01
4 ZHAO Meng-meng,ZHANG Chi,LIN Yu-zhen,LIU Gao-en(National Key Laboratory on Aero-Engines,School of Jet Propulsion,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Study of overall cooling effectiveness of discrete holes with different angles to concave wall[J];Journal of Aerospace Power;2007-02
5 YAO Yu1,ZHANG Jing-zhou1,GUO Wen2(1.College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;2.China Gas Turbine Establishment,Chengdu 610500,China);Numerical investigation on film cooling effectiveness of stator blade with different angles[J];Journal of Aerospace Power;2009-03
6 XIE Hao1,2,ZHANG Jing-zhou2(1.School of Power Engineering,Nanjing Normal University,Nanjing 210042,China;2.College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China);Numerical study on adiabatic wall cooling effectiveness and convective heat transfer coefficient of effusion cooling[J];Journal of Aerospace Power;2009-06
7 YANG Cheng-feng,ZHANG Jing-zhou,YANG Wei-hua(College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China);Effect of the holes array arrangement on the full coverage film cooling characteristics[J];Journal of Aerospace Power;2010-07
8 WU Hong1,MENG Heng-hui2,TAO Zhi1,XU Guo-qiang1,DING Shui-ting1(1.School of Jet Propulsion,Beijing University of Aeronautics and Astronautics,Beijing 100191,China;2.Beijing Institute of Spacecraft System Engineering,China Academy of Space Technology,China Aerospace Science and Technology Corporation,Beijing 100063,China);Numerical investigation on the effect of different anti-vortex hole configurations on film cooling effectiveness[J];Journal of Aerospace Power;2010-10
9 WANG Tao,SUO Jian-qin,LIANG Hong-xia,WANG Rong-juan(School of Power and Energy,Northwestern Polytechnical University,Xi'an 710072,China);Numerical study of tangential effusion cooling for combustor liner[J];Journal of Aerospace Power;2011-05
10 ZHANG Bo1,LI Ji-bao2,JI Hong-hu1,SHANG Shou-tang2,CHENG Ming2,WANG Yan-li2(1.College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;2.Shenyang Aeroengine Research Institute,Aviation Industry Corporation of China,Shenyang 110015,China);Numerical and experimental investigation on effect of distance between impingement and effusion plates on heat transfer characteristics of impingement-effusion composite cooling[J];Journal of Aerospace Power;2011-08
【Co-references】
Chinese Journal Full-text Database 3 Hits
1 LI Zhi-qiang(National Key Laboratory on Aero-Engines,School of Jet Propulsion, Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Studies on film cooling with different shaped jet holes[J];Journal of Thermal Science and Technology;2010-02
2 HU Ya-ping,JI Hong-hu(Coll. of Energy and Power,Nanjing Univ. of Aeronautics and Astronautics, Nanjing 210016,China);Effect of porosity of holes array on cooling effectiveness of effusion cooling[J];Journal of Propulsion Technology;2005-01
3 LIU Cun-liang, ZHU Hui-ren, BAI Jiang-tao, XU Du-chun (School of Power and Energy, Northwestern Polytechnical Univ., Xi’an 710072, China);Film cooling characteristics of converging-expanding hole with equal exit-entry area[J];Journal of Propulsion Technology;2009-06
【Secondary References】
Chinese Journal Full-text Database 1 Hits
1 Zhong Minbo;Wang Lijuan;Xi Guannan;Yuan Yinnan;School of Energy and Power Engineering,Jiangsu University;School of Mechanical Engineering,Nantong University;School of Energy,Suzhou University;;Influence of outlet height on heat transfer characteristics for transitional flow over a backward-facing step[J];Journal of Jiangsu University(Natural Science Edition);2015-06
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 XU Quan hong, LIN Yu zhen, LIU Gao en ( Beijing Univ. of Aeronaut & Astronaut, Beijing 100083, China );Heat transfer coefficient of impingement/effusion double wall cooling method[J];Journal of Dalian University of Technology;2001-S1
2 CHEN Yan JI Hong-Hu HU Ya-Ping (College of Energy and Power Engineering, NUAA, Nanjing 210016, China);STUDY OF CONVECTIVE HEAT TRANSFER COEFFICIENT OF EFFUSION COOLING[J];Journal of Engineering Thermophysics;2005-03
3 HU Ya-ping,JI Hong-hu(College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing210016,China);Numerical Study of the Blowing Angle Effecton Effusi on Cooling Effectiveness[J];Journal of Aerospace Power;2005-01
4 TANG Qing-ru(Civil Aviation Flight University of China,Guanghan 618307,China);A study of optimization of convection and heat transfer of impingement/effusion double wall[J];Journal of Aerospace Power;2007-03
5 XU Jian,XU Quan-hong,LIN Yu-zhen,LIU Gao-en,FAN Peng-hui(National Key Laboratory on Aero-engines,School of Jet Propulsion,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Experimental investigation of the temperature gradient and cooling efficiency for effusion wall cooling methods on combustion liner[J];Journal of Aerospace Power;2008-03
6 DANG Xin-xian1,2,ZHAO Jian-xing1,YAN Ying-wen1,LIU Yong1,XU Rong1,ZHANG Xin1(1.College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;2.Department of Flight Theory Education,Unit 94580,The Chinese People's Liberation Army,Bengbu 233000,China);Experiment of wall temperature in a two-stage swirler combustor[J];Journal of Aerospace Power;2010-06
7 ZHANG Rong-chun,FAN Wei-jun,XING Fei(National Key Laboratory of Science and Technology on Aero-Engines,School of Jet Propulsion, Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Experimental study of wall temperature distribution on annular interstage trapped vortex combustor[J];Journal of Aerospace Power;2010-06
8 Han Zenxing,Zhu Gujun,Ji Shouli,L ong Yingtian (4th Dept.Beijing University of Aerouautics and Astronacctics,Beijing 10 0083);CALCULATION OF 2 D WALL TEMP ERATURE DISTRIBUTION FOR FILM COOLED FLAME TUBE OF COMBUSTION CHAMPER[J];JOURNAL OF AEROSPACE POWER;1995-01
9 Fang Ren,Li Bin,Lin Yuzheng,Liu Gaoen(4th Dept.Beijing University of Aeronautics and Astronautics,Beijing 100083) ;AN EXPERIMENTAL INVESTIGATION OF ADIABATICEFFECTIVENESS OF INCLINED MULTIHOLE WALL FULL-COVERAGE FILM COOLINGWITH HEAT-MASS TRANSFER ANALOGY METHOD[J];JOURNAL OF AEROSPACE POWER;1998-01
10 Lin Yuzhen,Song Bo,Li Bin,Liu Gaoen (4th Dept.Beijing University of Aeronautics and Astronautics,Beijing 710072);A STUDY ON CONVECTIVE HEAT TRANSFER IN HOLES OF INCLINED MULTIHOLE WALL FILM COOLING[J];JOURNAL OF AEROSPACE POWER;1999-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved