Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Chongqing University of Technology(Natural Science)》 2013-04
Add to Favorite Get Latest Update

Machining Simulation of Epicycloidal Bevel Gears Based on UG

BAI Yang1,ZHANG Wei-qing1,2,ZHAO Xiao-bo1(1.Chongqing Automobile College,Chongqing University of Technology,Chongqing 400054, China;2.Chongqing Institute of Science and Technology,Chongqing 401123,China)  
According to the analysis of the principle of epicycloidal bevel gears cutting processing,the relative position and the movement relation of cutter,cradle,work gear are confirmed in this paper.The model of generating gear is built.The simulation of gear cutting processing is realized based on the principle and module by the software of UG.By comparing the tooth surface model and the theoretical tooth surface,the correctness of machining simulation method is verified.
【Fund】: 国家科技重大专项资助项目(2011ZX04002-032);; 国家自然科学基金资助项目(51175531)
【CateGory Index】: TH132.41
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 5 Hits
1 Dong Xuezhu(29);Study on Principles of Cutting Epicycloid Bevel Gears by Continuous Indexing Method[J];Journal of Mechanical Transmission;1999-02
2 Zou Min1 Ding Jun2(1 Mechanical Engineering Institute,Changzhou University,Changzhou 213016,China)(2 Jiangsu Reducer Product Quality Supervision and Inspercion Center,Taixing 225401,China);The Principle of Epicycloidal Bevel Gears and Their Generating Gears[J];Journal of Mechanical Transmission;2011-06
3 Li Wei,Li Jianfeng,Wang Qingyun(Key Laboratory of Advanced Manufacturing Technology of Beijing Municipality,Beijing University of Technology,Beijing 100022);Tooth Face Equations and Graph Emulation of Klingelnberg Cyclo-palloid Spiral Bevel Gears[J];Mechanical Science and Technology;2006-12
4 Wu Lianyin,Wei Hongqin,Wang Xiaochun (School of Mechanical Engineering, Xi′an Jiaotong University, Xi′an 710049, China);Analysis of the Forming Principle and the Differential Structure of Extended Epicycloid Bevel Gear Tooth Surface[J];Journal of Xi'an Jiaotong University;2001-01
5 ZHANG Weiqing①, GUO Xiaodong①②, ZHANG Mingde①, XU Luning①(①Key Lab of Automobile Parts & Test Technique in Ministry of Education, Chongqing University of Technology, Chongqing 400050,CHN;②The Statc Key Laboratory of Mechanicd Transmission Chongqing University, Chongqing 400044, CHN);Research on kinematics and cutting simulation of epicycloids bevel gear cutting machine[J];Manufacturing Technology & Machine Tool;2011-09
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LI Jian-feng WANG Qing-yun LI Wei FAN Jin-hong (College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100022,China);Development of Computer Aided Design and Machine Setting Software for Cycloid Spiral Bevel Gear[J];Journal of Beijing University of Technology;2007-10
2 YU Wen-tao a,LI Yong b(a.Chongqing Institute of Automobile;b.School of Material Science and Engineering,Chongqing Institute of Technology,Chongqing 400050,China);First Order Correction of Contact Zone to Olinkon Spiral Bevel Gear System[J];Journal of Chongqing Institute of Technology(Natural Science);2009-02
3 Xu Luning,Postgraduate,Chongqing University of Technology,Chongqing 400050,China,Guo Xiaodong,Zhang Weiqing;Research on Oerlikon's Bevel Gear Cutter Geometry[J];Tool Engineering;2010-05
4 Xu Luning,Guo Xiaodong,Zhang Liyin,Hou Wenjun,Li Xuanqiu Postgraduate,Engineer,Shantui Construction Machinery Co.,Ltd.,Jining,Shandong 272073,China;Grinding Method and Machining Simulation for Bar Blades of Oerlikon's Bevel Gear Facer[J];Tool Engineering;2012-09
5 Ma Junfang;Yang Yuhong;Zhao Qingshen;Song Kewei;Shi Guozhou;China National Heavy Truck Group Jinan Axle and Transmission Co.,LTD;;Research and Application about SPIRON Cutter of Cycloid Gear[J];Tool Engineering;2013-11
6 CHENG Wan xian, HUANG Dao tian (Aluminium Corp,HangJiang Group,DanJiangKou 441900, China);Spiral Bevel Gear Generating Theory Analysis of Oerlikon C Sierial of CNC Machine[J];Journal of Hubei Polytechnic University;2002-03
7 NIE Shao-wu1,DENG Xiao-zhong2,LI Tian-xing1,ZHANG Hua2,DENG Jing1 (1.School of Mechanical Engineering, Northwestern Polytechnical University,Xi'an 710072,China; 2.School of Mechatronics Engineering, Henan University of Science and Technology,Luoyang Henan 471003,China);Tooth meshing contact analysis for bevel gears by face hobbing method based on arc blade profile[J];Journal of Aerospace Power;2012-06
8 Han Xia,Jin Zhongbo,Chen Henggao(College of Engineering,Heilongjiang Bayi Agricultural University,Daqing 163319);Study on Gearing Theory and Characteristic of Constant Instantaneous Contact Ratio Gear[J];Journal of Heilongjiang Bayi Agricultural University;2009-04
9 WANG Zhi-wei,et al (Henan Mechanical and Electrical Engineering College,Xinxiang 453002,China);An Analysis on the Errors in the Course of Tooling Spiral Bevel Gear with the Flat Top Principle[J];Machine Tool & Hydraulics;2003-06
10 TANG Jian1,YU Shui-qin2,WANG Zhi-yong2(1.College of Mechanical Engineering,Quzhou University,Quzhou 324000,China;2.College of Mechanical &Electrical Engineering,Central South University of Forestry and Technology,Changsha 410075,China);Study on cutting simulation system of cyclo-palloid bevel gears[J];Journal of Mechanical & Electrical Engineering;2011-09
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Liu Zhifeng,Chen Liangyu,Wang Yanzhong,Ding Jinyuan (School of Mechanical Engineering and Automation,Northeastern University, Shenyang 110006,China);Geometry Analysis of Klingelnberg Spiral Bevel Gear[J];JOURNAL OF NORTHEASTERN UNIVERSITY;1999-04
2 ZOU Min 1,ZHANG You-liang 2,ZHANG Wen-xiang 2 (1.Department of Mechanical Engineering, Jiangsu Institute of Petrochemical Technology, Changzhou 213016,China;2.Nangjing University of Science and Technology;3.Anhui University of Science and Technology);New Type of Bevel Gear-Klingelnberg Type and its Machine Tools[J];Journal of Jiangsu Institute of Petrochemical Technology;2002-03
3 Dong Xuezhu(29);Study on Principles of Cutting Epicycloid Bevel Gears by Continuous Indexing Method[J];Journal of Mechanical Transmission;1999-02
4 Dong Xuezhu;Improvement of Calculating Method on Machine Setting for Generating Cyclo Palloid Bevel Gears[J];MECHANICAL TRANSMISSION;1997-04
5 ZOU Min 1,2 , ZHANG Wen xiang 3, ZHANG You liang 1 ( 1 College of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094; 2 Department of Mechanical Engineering, Jiangsu Polytechnic University, Changzhou 213016 3 Department of Mechanical Engineering, Anhui University of Science and Technology, Huainan 232001);Computer Simulated Manufacturing for Bevel Gear of Klingelnberg Type[J];Mechanical Science and Technology;2003-03
6 CHEN Fang,ZHOU Yunfei,LI Xiaoqing (Research Centre of National NC System Englneering and Technology,College of Mechanical Science.& Engineering, Huazhong University of Science and Technology,Wuhan 430074,China);Motion Transformation Analysis on the NC Machining of Oerlikon Curved Tooth Bevel Gear[J];Machinery & Electronics;2002-01
7 ZOU Min1, 2, ZHU Hai-lin2, ZHANG You-liang1 (1. Jiangsu Research Center of Engineering Technology on Equipment for Wellhead, Jiangsu Polytechnic University, Chang-zhou 213016, China; 2. School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing, 210094, China);Research on theory of gearing for epicycloidal bevel gear[J];煤炭学报(英文版);2005-02
8 Wu Lianyin,Wei Hongqin,Wang Xiaochun (School of Mechanical Engineering, Xi′an Jiaotong University, Xi′an 710049, China);Analysis of the Forming Principle and the Differential Structure of Extended Epicycloid Bevel Gear Tooth Surface[J];Journal of Xi'an Jiaotong University;2001-01
9 Zhang Weiqing1 Zhang Mingde1 Guo Xiaodong1 Lu Mingwen1 Hu Guangxi21.Key Laboratory of Manufacture and Test Techniques for Automobile Parts of Ministry of Education,Chongqing University of Technology,Chongqing,4000502.Tianjin No.1 Machine Tool Works,Tianjin,200180;Research on the Kinematic Control Method of CNC Hypoid Cutting Machine and the Cutting Experiments[J];China Mechanical Engineering;2009-22
10 ZHANG Mingde,ZHANG Weiqing,GUO Xiaodong (Key Laboratory of Manufacture and Test Techniques for Automobile Parts, Ministry of Education , Chongqing 400050,CHN);The Development of CNC Hypoid Cutting Machine Software[J];Manufacturing Technology & Machine Tool;2009-11
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved