Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Missiles and Space Vehicles》 2017-01
Add to Favorite Get Latest Update

Mechanism of Manufacturing Defects and Controlling for Advanced Grid Stiffened Structures

Li Jian-fang;Li Gui-yang;Guo Hong-jun;Du Bao-xian;Li Yan-xia;Aerospace Research Institute of Materials & Processing Technology;Beihang University;  
The process influencing association of curing defects in advanced grid stiffened composite is summarized in term of the control factors and defect characters.Meanwhile, the control factors of curing temperature and pressure were evaluated via process simulation for creating the process control method.Furthermore, the typical grid stiffened cylinder is prepared to verify the availability for this process control method.The results show that increasing pressure parameter can significantly enhance the quality and compression stability of advanced grid stiffened structures.
【Fund】: 国家自然科学基金-青年科学基金项目(51603058)
【CateGory Index】: V46
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 6 Hits
1 Wang Xueming1,2, Xie Fuyuan1,2, Li Min1, Dai Di2, Wang Fei2, Zhang Zuoguang1(1.School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China)(2.Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024, China);Effect Rules of Complex Structure on Manufacturing Defects for Composites in Autoclave Molding[J];航空学报;2009-04
2 Ma Binjie1,Sheng Zuming 2 ,Jia Liang1,Wang Shufan 2(1.Beijing Institute of Structure and Environment Engineering,Beijing,100076;2.Beijing Institute of Astronautical System Engineering,Beijing,100076);Optimization of Skin Ply and Stringer Angle of a Mesh Reinforced Composite Cylinder Shell under Axial Load and External Pressure[J];导弹与航天运载技术;2009-01
3 XU Jiwei,LI Min,GU Yizhuo,ZHANG Zuoguang(School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing100083,China);Quantitative measuring method and influencing factors of void formation conditions in thermosetting resins[J];复合材料学报;2008-02
4 DU Shan-yi, ZHANG Ji-feng, ZHANG Bo-ming(Center for Composites and Structures, Harbin Institute of Technology, Harbin 150001, China);Overview of Application and Research on Advanced Composite Grid Structures[J];航空学报;2007-02
5 Ti Yafeng~(1,2),Tang Guojin~1(1.College of Aerospace and Marterial Engineering,National Univ.of Defence Technology,Changsha,410073;2.Beijing Institute of Astronautical Systems Engineering,Beijing,100076);Design and Analysis of Carbon-Epoxy Composite Trellis Wound Structure under Axial Force Combined with External Pressure[J];导弹与航天运载技术;2005-05
6 Liu Ling Zhang Boming Wang Dianfu(Center for Composite Materials, Harbin Institute of Technology, Harbin 150001);Development of Void Problem for Carbon/epoxy Composite Materials[J];宇航材料工艺;2004-06
Chinese Journal Full-text Database 9 Hits
1 WANG Shixun;SHI Yuhong;ZHANG Xi;JI Baofeng;LI Xiongkui;Beijing Institute of Astronautical Systems Engineering;;Application and Research Progress of Composite Lattice Grids Structure[J];宇航材料工艺;2017-01
2 YANG Rong;MA Binjie;WU Bing;DU Jun;BAI Lu;MAO Lina;ZHANG Mingli;Beijing Institute of Structure and Environment Engineering;;Axial compression stability analysis of stiffened cylindrical shell with grid[J];强度与环境;2016-04
3 WU Zhanjun;QU Xiaoxi;GAO Dongyue;LIU Kehai;FENG Jianmin;State Key Laboratory of Structural Analysis for Industrial Equipment, School of Aeronautics and Astronautics,Dalian University of Technology;School of Materials Science and Engineering, Dalian Universityof Technology;AVIC Aircraft Strength Research Institute;;Research Progress on Structural Health Monitoring Technology for Aerospace Composite Structures[J];航空制造技术;2016-15
4 WU Dun;ZHANG Cheng;ZHANG Gang;CHENG Wenjun;LIU Chunlin;School of Materials Science and Engineering,Changzhou University;;Study on Low Shrinkage Control Mechanism and Properties of BMC[J];常州大学学报(自然科学版);2016-03
5 XU Wei;ZHAO Qi-lin;College of Field Engineering,PLA University of Science and Technology;;THE OPTIMUM DESIGN OF COMPOSITE LATTICE STRUCTURE[J];玻璃钢/复合材料;2016-03
6 XIAO Peng;LIU Wei-ping;LIU Kui;HUANG Zi-yu;Aeronautical Manufacturing Technology Research Institute,Shanghai Aircraft Manufacturing Co.,Ltd.;State Key Laboratory for Modification of Chemical Fibers and Polymer Materials,Donghua University;;STUDY ON DISTRIBUTION AND MORPHOLOGY CHARACTERISTIC OF VOIDS IN CFRP COMPOSITES[J];玻璃钢/复合材料;2016-02
7 ZHOU Yuan-qi;PU Yong-wei;ZHAN Li-hua;SONG Yang;LI Shu-jian;PENG Wen-fei;Light Alloys Research Institute,Central South University;Shenyang Aircraft Industry ( group) Co.,LTD;College of Mechanical and Electrical Engineering,Central South University;;Forming Quality of Composite Hat-stiffened Structure by Autoclave Co-curing Process[J];航空材料学报;2015-05
8 WAN Lei;SUN Lu;LI Jing;YANG Yao-dong;Beijing Spacecrafts;;Failure Analysis of Carbon Fiber / Epoxy Composite Transverse Pipe[J];失效分析与预防;2015-04
9 GUO Yuqin;YANG Yan;SUN Minhang;TANG Pengpeng;School of Mechanical Engineering, Jiangsu University;;Vertical Shearing Fracture Behavior of Carbon Fiber Reinforced Plastic of Different Status[J];材料研究学报;2015-07
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 LI Yanxia,LI Min*,ZHANG Zuoguang,GU Yizhuo (School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Numerical simulation on consolidation and deformation of L-shaped composite laminate in autoclave process[J];复合材料学报;2008-03
2 GU Yizhuo,ZHANG Zuoguang,LI Min,XIE Fuyuan(School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing100083,China);Experimental study on type and cause of defects in variable thickness composite laminates during hot pressing process[J];复合材料学报;2008-02
3 WANG Henan,ZHANG Zuoguang,GU Yizhuo,LI Min(School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Effects of different factors on the void defect in epoxy composite laminates in hot pressing process[J];复合材料学报;2007-05
4 WANG Jiang1 HUANG Cheng1 XU Wei-xiu1 SHENG Zu-ming1 MA Bin-jie2 AO Lin1(1 Beijing Institute of Astronautic System Engineering,Beijing 100076,China)(2 Beijing Institute of Structure and Environment Engineering,Beijing 10076,China);Optimum analysis on included angle between ribs of stiffened cylindrical shell[J];强度与环境;2007-04
5 DENG Huoying,ZHANG Zuoguang,GU Yizhuo,LI Min* (School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Experimental research on defects of L-shape laminates in vacuum-bag process[J];复合材料学报;2007-04
6 LIU Hongxin,ZHANG Zuoguang~(*),GU Yizhuo,LI Min(School of Materials Science & Engineering,Beijing University of Aeronautics & Astronautics,Beijing100083,China);Experimental research on compressibility of unidirectional fiber cloth[J];复合材料学报;2006-03
7 BAI Ruixiang~(1,*), WANG Man~2, CHEN Haoran~1(1.State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology,Dalian 116024,China;2.School of Mechanial Engineering & Automation,Dalian Institute of Light Industry, Dalian 116034, China);BUCKLING BEHAVIOR OF COMPOSITE AGS WITH DELAMINATION[J];复合材料学报;2005-04
8 ZHANG Zhifeng~1, CHEN Haoran~(1,*), LI Xuan~2, JIANG Yuanxing~2 ( 1. State Key Laboratory of Structural Analysis for Industrial Equipment , Dalian University of Technology, Dalian 116023, China; 2. The 703 Institute of Chinese Aerospace Science and Technology Corporation, Beijing 100092 , China);HYBRID GENETIC ALGORITHM FOR OPTIMUM DESIGN OF ADVANCED GRID COMPOSITE CIRCULAR CYLINDERS[J];复合材料学报;2005-02
9 LI Chen sha, ZHANG Bo ming, WANG Dian fu, DU Shan yi (The Center of Composite Material of HIT, Harbin 150001,China);STUDYING THE CURING PROCESS OF COMPOSITE BY NUMERICAL MODEL[J];复合材料学报;2000-04
10 Feng Mingguang, Xu Qian, Xu Junhuan ( Department of Biological Sciences, Zhejiang University, Hangzhou 310029).;Humidity control in biological experiments: modified device and methodology.[J];应用生态学报;1999-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved