Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Electric Welding Machine》 2019-08
Add to Favorite Get Latest Update

Welding procedure test of TS980QC steel

ZHANG Hong;LI Xiaoyu;ZHOU Jun;ZHANG Chunbo;Bohai Shipbuilding Heavy Industry Co.,Ltd.;Harbin Welding Institute Co.,Ltd.;  
By using MAG welding with φ(Ar)80%+φ(CO_2)20% shielded gas,the welding procedure test of 8 mm thick TS980QC steel plate is carried out to study the cold crack resistance sensitivity of material,the influence of welding heat input on welding quality and the comprehensive quality of welded joint. The results show that the cold crack in the welding of TS980QC high-strength steel(8 mm thick) can be avoided at a preheating temperature over 50 ℃. This steel is sensitive to welding heat input,and its performance decreases when the heat input is too high or too low. The welding wire selected in the experiment can match the performance of TS980QC high strength steel when using the appropriate technological conditions.
【CateGory Index】: TG457.11
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved