Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Electromachining & Mould》 2010-01
Add to Favorite Get Latest Update

Research on Multi-cutting Processing of HS-WEDM based on Orthogonal Experiment

Li Chaojiang,Guo Yongfeng,Bai Jicheng,Yang Sanqiang,Zhu Guozheng,Lu Zesheng(Harbin Institute of Technology,Harbin 150001,China)  
Based on a number of factors influencing on the multicutting of HS-WEDM,an orthogonal experiment was performed to study the influence of pulse width,pulse interval,current peak,wire speed,the working fluid and the offset of the electrode wire on the processing efficiency and surface roughness for three-time cutting of HS-WEDM.This method can not only confirm the level of remarkable effecting factors of the processing efficiency and the surface roughness,but also optimize the parameters.Furthermore,combining with practical situation,the surface roughness Ra can reach to 0.69 μm after five-time HS-WEDM experiment.Thus,those reproducible parameters during the process will be better.
【Fund】: 国家863高技术研究发展计划资助项目(2007AA04Z345)
【CateGory Index】: TG484
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved