Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2007-06
Add to Favorite Get Latest Update

Design and sensitivity analysis of blank holding force for high strength steel sheet

HU Xing LI Shu-hui (1.School of Mechanical Engineering,Shanghai Jiao Tong University,Shanghai 200240,China; 2.State Key Laboratory of Mechanical System and Vibration,Shanghai Jiao Tong University,Shanghai 200240,China)  
The traditional design methods of blank holding force were summarized.The availability of the traditional empirical formulae of blank holding foree(BHF)was analyzed while using high strength steel instead of ordinary deep drawing grade The limitation of traditional empirical formulae to be applied to deep drawing of high strength steel pan- els was figured out.Then the sensitivity of the formability and accuracy to BHF for different kinds of steels were com- pared and the reasons were further analyzed by strain hardening and forming limit curves.The results above provide a foundation for the BHF design for high strength steel sheet.
【Fund】: 国家自然基金(50405015)
【CateGory Index】: TG386
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 2 Hits
1 ZHANG Nan1,2,LIU Yu-qi2,XU Heng-jian2,QIN Tao3(1.Mechanical and Electronicengineering Department,Handan Vocational and Technical College,Hebei Handan 056001,China;2.State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology,Hubei Wuhan 430073,China;3.Wuhan Xianfeng mould Co.,Ltd,Hubei Wuhan 430224,China);Numerical Simulation for one-off Drawing Formability of a Support Beam of Automobile[J];Machinery Design & Manufacture;2013-04
2 LI Mei,ZHAO Yi-xi,HU Xing,HUANG Sheng(Shanghai Key Laboratory of Digital Auto-body Engineering,Shanghai Jiaotong University,Shanghai 200240,China);Experimental Study of Shear Fracture on Advanced High Strength Dual-Phase Steels[J];Journal of Shanghai Jiaotong University;2011-11
Chinese Journal Full-text Database 1 Hits
Chinese Journal Full-text Database 10 Hits
1 He Laiqing (Taiyuan University of Technology,Taiyuan 030024) Hou Yixin (North China Institute of Technology, Taiyuan 030051);QUALITY ANALYSIS OF ZINC BASED ALLOY DIE STAMPING[J];JOURNAL OF NORTH CHINA INSTITUTE OF TECHNOLOGY;1997-02
2 Zhao Xiaofen Li Manping;A Brief Talk on Die Life and Its Prolonging Methods[J];JOURNAL OF HUBEI POLYTECHNIC UNIVERSITY;1996-03
3 ZHU Jun~1,ZHANG Li-rong~2,ZHANG Wei~1(1.Equipment Department,Tangshan Steel Company,Tangshan Hebei 063020,China;2.Basic Courses Department,Tangshan Industrial and Vocation-technical College,Tangshan Hebei 063020,China);Reducing energy consumption in the production process of semifinished copper tube by utilizing group technology[J];Hebei Journal of Industrial Science & Technaology;2005-06
4 ZHOU Xiang,MENG Xian-ju(College of Mechanical Engineering,Hebei Polytechnic University,Tangshan Hebei 063009,China);Numerical Simulation of Pipe Size of Open-die Cold Extrusion the Forecast[J];Journal of Hebei Polytechnic University(Natural Science Edition);2010-03
5 WANG Yun;LIU Quan-kun;WANG Lei-gang(School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China);Management information of die-holder based on RDBMS and graph output[J];JOURNAL OF HEFEI UNIVERSITY OF TECHNOLOGY(NATURAL SCIENCE);2000-02
6 SHU Qing bin, LIU Xiao ping (School of Computer Science and Information Engineering, Hefei University of Technology, Hefei 230009, China);Assemble model for the CAD system of die[J];Journal of Hefei University of Technology(Natural Science);2001-05
7 LI Dongsheng,LIU Quankun (School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China);On the reference model in CAD system of die structure and relative technology[J];Journal of Hefei University of Technology(Natural Science);2003-05
8 LI Lian-hao~1, TAO Wen-qin~2 (1.Hefei Changhe Automobile Co.,Ltd, Hefei 230031, China; 2.Anhui Dazhong Automolile Transportation Co.Ltd, Hefei 230011, China);Analysis of the technical characteristic of IDEAL car fender and die design[J];Journal of Hefei University of Technology(Natural Science);2005-03
9 CHEN Wen-lin~1,MIAO Liang~1,YAN Min~2,ZUO Zhi-gao~2(1.School of Material Science and Engineering,Hefei University of Technology,Hefei 230009,China;2.Hefei ZhongBang Technology Company,Ltd,Hefei 230088,China);Application of numerical simulation in automobile panel drawbead design[J];Journal of Hefei University of Technology(Natural Science);2005-12
10 ZHOU You, ZHAO Zhao-zhi (1 Hunan Industry Polytechnic, Changsha 410007;2 Changfeng Auto Manufucture Ltd.Co, Changsha 410014,China);Design of Compound Die of Cut-tandem-punch-flang[J];Journal of Hunan Industry Polytechnic;2003-02
China Proceedings of conference Full-text Database 10 Hits
1 CHEN Yan1,GAO Lin 1 ,WU Xian-Zhi2,QIU Ting-Yu 2 ,REN Jing2 (1.Department of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics, Nanjing,210016,China; 2.Technology Integration Management Lab,Pegatron Corporation,Suzhou,215000,China);Research on Multistage Deep Drawing and Ironing of an Irregular Cup[A];[C];2009
2 LI Ying-jie (Shanxi Changling Electronic Science&Technology Co.,Ltd,Baoji 721006,China);Formulation and Verification of Bending Coefficients in Range from 0° to 180°[A];[C];2011
3 ;模具制造精度控制[A];[C];2008
4 Zhang Shutang Niu Shuhao Chen Yankun Li Xiaopeng Lei yong Henan Benma Co.,Ltd.Changge 461500;Bend the Process of Wrinkling and Fracturing Analysis and Control Methods[A];[C];2008
5 Zhao Zhongli Han Jingtao School of Materials Science and Engineering, University of Science and Technology Beijing 100083;Technology of Tube Internal High Pressure Forming in Lightweight of Automobile[A];[C];2005
6 Liu Tianhao Zhang Qingdong Zhu Jianru (Mechanical Engineering School,University of Science and Technology Beijing,Beijing 100083; Cold Rolling Dept. ,Baoshan Iron & Steel Co.,Ltd. ,Shanghai 200941);SIMULATION OF WIDE STRIP DEFORMATION DURING TENSION LEVELLING BY FEM[A];[C];2005
7 ZHANG Hai-dong,CUI Yong-feng,TENG Ke,ZHANG Xin SHI Jun-li,Fu Xiao-ling (Shandong Gold Mining(Laizhou)Ltd Sanshandao Gold Mine,Laizhou 261442,China);Application of compound uninstall curved rail in the mine unloading system[A];[C];2012
8 Quan Lu-bin,He Long,Guo Hui (Tianjin Zhi Cheng Motor Dies Company Limited(Subsidiary of Tianjin Motor Dies Company Limited).Tianjin 300308.China);Coil Transfer Stamping Die Design[A];[C];2012
9 Guang Dong University of Technology Xiao Xiaoting;USING FUZZY CONTROL OBTAINING THE BEST CLEARANCE[A];[C];1995
10 ;导料板自动定心跳步模设计[A];[C];2001
Chinese Journal Full-text Database 10 Hits
1 ZHANG Dong-juan,CUI Zhen-shan,LI Yu-qiang,RUAN Xue-yu(National Mold & Die CAD Engineering Research Center,Shanghai Jiaotong University,Shanghai 200030,China);Effect of virtual kinetic energy on springback simulation accuracy[J];Journal of Harbin Institute of Technology;2006-10
2 XIE Hui (College of Mechanical and Automotive Engineering,Hunan Univ, Changsha410082, China);Analysis of Factors Infecting Sheet′s Springback Based on CAE[J];Journal of Hunan University (Natural Science);2003-05
3 QIAN Jianqing(Anhui Polytechnic University, Ma′anshan 243000, China);Effect of Galvanized Coating on r-Value of Sheets[J];Journal of Iron and Steel Research;2003-04
4 GUO Yu-qin 1,2,JIANG Hong 1,WANG Xiao-chun 1 (1.Mechanical Engineering Institute,Xi’an Jiaotong University,Xi’an 710049,China;2.Department of Mechanical Engineering,College of Technology,Xuzhou Normal University,Xuzhou 221011,China);Study on Springback Prediction in Automotive Panels Forming Processing[J];Machine Tool & Hydraulics;2005-03
5 JIN Shun~1,YU Hai-yan~1,YANG Bing~1,ZHANG Wei-gang~1,XU Wei-li~2 (1.School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai,200030,China; 2.R&D Center,Baosteel Company,Shanghai,200000,China);Analysis of the Formability of Side Rails Made of High Strength Steels[J];Metal Forming Technology;2003-06
6 SHAO Pengfei 1 WANG Xiuxi 1 CHE Mei 2 [WT5,5”BX](1.Department of Mechanics and Mechanical Engineering, University of Science and Technology of China, Hefei, Anhui 230036, China) (2.The 710 Institute, China Aerospace Industry Corporation, Be;SPRINGBACK CALCULATION AND TOOL MODIFICATION IN SHEET METAL FORMING[J];Journal of Mechanical Strength;2001-02
7 Guo Yuqin Jiang Hong Wang Xiaochun (School of Mechanical Engineering, Xi 'an Jiaotong University,Xi'an 710049);RESEARCH ON CONTACT FRICTION IN SHEET FORMING NUMERICAL SIMULATION[J];Chinese Journal of Mechanical Engineering;2004-11
8 LI Fuzhu~1 GUO Yuqin~1 WANG Xiaochun~2 SONG Wei~3 (1. Technology Institute, Xuzhou Normal University, Xuzhou 221011; 2. School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049; 3. Department of Mechanical Engineering, Naval Aeronautical Engineering Academy, Yantai 264001);SPRINGBACK PREDICTION OF COVER PANELS BASED ON SIMULATED ANNEALING ALGORITHM[J];Chinese Journal of Mechanical Engineering;2006-08
9 DONG Yuan-hua (Technique Center)CUI Hui-gang (Medium Plate Plant);Production Practice on Q460D Low-alloy High-strength Steel Plate[J];Liugang Science and Technology;2010-03
10 ZHAO Meng-tao;Drawing Fanning Technology And Mould Design of Bottom Shells of Gasoline[J];Die and Mould Technology;2002-05
【Secondary References】
Chinese Journal Full-text Database 5 Hits
1 GAO Jing1,LIU Ke-su2,YU Zhong-qi1,LIN Zhong-qin1(1.Shanghai Key Laboratory of Digital Manufacturing for Thin-Walled Structures, Shanghai Jiaotong University,Shanghai 200240,China;2.School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);Numerical Analysis for Contact Pressure and Surface Damage in Dual-phase Steel Sheet Stamping[J];Journal of Shanghai Jiaotong University;2013-05
2 YUE Dong;SUN Li;YU Zhong-qi;Shanghai Key Laboratory of Digital Manufacture for Thin-Walled Structures,Shanghai Jiaotong University;;Wear Characteristics on Tools in U-shaped Stretch-Bending of Dual-Phase Steel Sheet DP780[J];Journal of Shanghai Jiaotong University;2014-05
3 HE Chun-feng;ZHAO Yi-xi;HUANG Sheng;Shanghai Key Laboratory of Digital Manufacture for Thin-walled Structures,Shanghai Jiaotong University;;Microstructural Study of Advanced High Strength Dual-Phase Steels Sheet Under Stretch-Bending Forming Process[J];Journal of Shanghai Jiaotong University;2014-05
4 WANG Min;ZHANG Chun;XIAO Hai-feng;LI Bing;Department of Materials Engineering,Hubei University of Automotive Technology;Material Forming and Mould Technology Open State Key Laboratory,Huazhong University of Science and Technology;;Experimental study on effects of holding time on hot stamping of high strength steel[J];Journal of Plasticity Engineering;2014-02
5 Sheng HUANG;Yi-xi ZHAO;Chun-feng HE;State Key Laboratory of Mechanical System and Vibration,Shanghai Jiao Tong University;Shanghai Key Laboratory of Digital Manufacture for Thin-walled Structures,Shanghai Jiao Tong University;;Shear Fracture of Advanced High Strength Steels[J];钢铁研究学报(英文版);2014-10
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved